Microcontroller Systems Engineering with Flowcode

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

got the file.
It wont let me enclose it, file too big. 1Meg.
can I e-mail it?

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

I got the file now, but it's too big to send I guess.
(max size 256kB)? The file is 1Meg.

Can I send it another way?

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

please reply as I would like to get this fixed asap..

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

I sent the log file to the support e-mail.
I'm in Japan and it's time for bed.
Please send me something I can try in the morning.

Thanks, Rob

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Benj »

Cheers Rob,

I have received the file and will forward it on to Steve.

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Steve »

Hi Rob,

The log file seems to say that there is no problem with the installation. I'm a bit out of ideas.

Perhaps it is because the OS you are running is Japanese? But this should not be a problem because we do have other customers in Japan.

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

Steve,

Please let me know what I should do next.
Obviously I cannot accept this final result while having paid good money for the software.

Not sure if this helps at all but here is some info on the error messages:

I only get the message when trying to place switches, leds, led arrays, lcd display.
Mainly components from the input/output groups. All of the other components place ok.
The keypad is the only component from the input group that I can place.
The error message reads:
"Run-time error Resource with identifier "35" not found" (the "35" was just an example, it varies by component)

I compared the files for the components that I can place and the ones I cannot to see if there was any obvious differences. (didn't see any)

Sometimes I also get this message:
"Could not load component because it is not registered on this machine. Install the necessary component before opening this file."

Is there a location in Japan that I can take my computer for someone to look at it? I'm in Yokohama.
I love the software (at least while it was working) so I have to get it going again.

Is there a way to get a temporary registration key so we can rule out any issues with my key?

Is there some way to start from "ground zero" remove everything and start from scratch? If I remember correctly, things when down hill when I tried the patch from version 4.2 to 4.3.

Rob

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

Steve,

Finally some success.

I downloaded version 4.2 and it is currently running on my computer. It didn't like something about ver. 4.3 I guess?
Some things are still a little loopy with the component icons,(showing the wrong icon) but it is much better than before.

Rob

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Steve »

Hi Rob,

Thanks for letting us know more details. I now have a better idea of the problem and I'll sort this out soon.

A quick question - are you running Flowcode in English or Japanese?

And to sort the icons out, there is a post on the forum somewhere for the workaround. Note that this issue has actually been fixed in V4.3 (but until we sort out that for you, wou'll need the workaround).

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

Hi Steve,

I am running Flowcode in English.

Thanks, Rob

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

The fix I'm really interested in is being able to load programs that have their own C-code (the C-code block) as the air-to-fuel program has.

Thanks, Rob

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Steve »

I'm finding it difficult to replicate this "resource not found" error here. Can you please find the LED, LEDarray and LCD components (these are all .ocx files in the "components" subfolder of Flowcode), right-click them and select "properties". From this screen, you should be able to find the version number of them. Can you please tell me what it is.

Also, can you please post a Flowcode file here that is reporting this error (and please say exactly what the error is).

We're desparate to fix this problem, and should be able to release a fixed install today.

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Steve »

The fix to the components issue is here:
http://www.matrixmultimedia.com/mmforum ... 248#p18099

I also hope that this will fix your problem with that particular air-to-fuel program.

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

Hi Steve,

Not sure if you still need the *ocx file version number, but it is 4.1.0.2. (for the LED,LED array, and LCD)
I will try installing version 4.3 again in a bit. To be honest, I'm a little nervous after what happened last time.
It seems to be working though, judging from the other write-ups.

Thanks for your help.
Rob

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

I guess once the fix for this problem (the components) is in place I will download version 4.3 again.
As you know, my original problem was that I could not compile the Air-to-fuel problem. Will version 4.3 fix this problem?
Some of the other problems that include C-code compile ok, is the problem related to the use of look up tables?

Thanks, Rob

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Benj »

Hello Rob,

There is now a fix for the v4.3 release that is detailed here.

http://www.matrixmultimedia.com/mmforum ... 112#p18099

We hope to have a new v4.3 install release available shortly.

v4.3 should fix your compilation problems. However If you are back running v4.2 then go into your Flowcode v4\FCD folder and find the file named internals.h and open in a text editor.

These lines are near the top of the file.

//unsigned char FCI_TMP_STR[20];
//int FCI_TMP_INT;

Change them so that the comments are removed and save the file.

unsigned char FCI_TMP_STR[20];
int FCI_TMP_INT;

Your program should now compile correctly.

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

Thanks Steve,

I'm sticking with version 4.2 for now.

I made the changes to the H file. Works like a charm now.
You guys are good!

Thanks, Rob

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by medelec35 »

Persistence Of Vision project Chapter 4.8 page 135
This project works well, but to create your own text that is displayed in the air (by waving LED Board EB004) You may need to do the following:
1) Download Flowbook (details can be found on page 14)
2) Run VB SKYwriter dater builder software (This is found within Flowbook Chapter 1)
When running the software for the first time it may not work correctly.
This can be solved as following:
Error: "The program can't start as MSVBVM50.dll is missing" etc
Solution: Download and run VB5 run-time files installation from: http://support.microsoft.com/kb/180071

Error: "Run-time error '53': File not found: 'down.jpg'
Solution: Open windows paint. Click Save or Save As. Select JPG as the type, and name file as down
Make sure down.jpg is saved into same location as SKYwriter

Now SKYwriter should run.
Don't create text just yet. First you need to make sure path of skytable.txt in the small window below 'Start Lookup table' is correct.
Wrong = red square displayed. If you have a red square next to the path window, then if v is clicked you will get an error: "Run-time error '76': Path not found"
If that is the case, keep the \skytable.txt, and make sure path of SKYwrited is correct just before \skytable.txt.
E.g if SKYwriter is in C:\FlooBook\chapter 1\SKYwriter
then in the path window you should have:
C:\FlowBook\chapter 1\SKYwriter\skytable.txt
Path can be checked by clicking onto 'Start Lookup table', if path is OK then square will turn to green.
You should now be ready to create your own message that is displayed when waving the LED Eblock in the air!
Follow instruction on page 136 of Microcontroller Systems Engineering.
Martin

Walbeek
Flowcode v5 User
Posts: 68
Joined: Thu Mar 01, 2007 10:48 am
Location: Netherlands
Been thanked: 3 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Walbeek »

Hi there,

I do have the book "Microcontroller systems engineering"
Now I want to do some testing with the cell-phone module.
The first project is "Send a text message", chapter 6,1.
However, the FC is build for AVR controllers and not for PIC.
I only have the EB006 for PIC controllers.
With FC4 for PIC, I can´t open the AVR file to change to PIC.
Is the Flowcode listing available in another format, like PDF?

Please met me know.
Greetings, Rinie
Flowcode V7 user

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by medelec35 »

Hello Walbeek
If you have Flowcode V4 for PIC. For ARM and AVR files you need to go to file menu and select import and not open.
If you used import and did not work, are you using the latest version of Flowcode V4?

I used import and file in question (send text message.fcf_avr) loaded with no problems. The only thing you need to do is select a target device. At random I selected 18F2420.
Martin

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Steve »

When importing a file from a different microcontroller range, you will also need to reset the clock speed and configuration data accordingly.

Walbeek
Flowcode v5 User
Posts: 68
Joined: Thu Mar 01, 2007 10:48 am
Location: Netherlands
Been thanked: 3 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Walbeek »

Hi there,

Thanks for your quick respond.
Importing the file works ok!
I did try to open it the ´normal´ way.

Thanks
Greetings, Rinie
Flowcode V7 user

RobOnk
Posts: 37
Joined: Mon Jan 11, 2010 12:16 am
Been thanked: 1 time
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by RobOnk »

Hello, need help.

I'm trying to use a 16f887 in my matrix version 3 development board. It came with a 16f877A, which of course worked fine.
I guess there is a setting I don't have correct. I'm getting strange behavior, like the program stopping in mid-stream..

The major difference I am aware of is the internal osc. in the 16f887.

Any ideas?

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by medelec35 »

Hiya RobOnk.
Are you having an issue with same project as your previose post or a different project?
If post your flowchart, then It can be checked out for you.
Otherwise can't help much with the little information you have given.

If I was to guess at this stage, either configuration settings are wrong WDT or Debug is set to on etc
Or an interrupt is causing an issue.
E.g stack corruption or Program requires timer0 form internal clock, but interrupt is set to trigger from T0CKI pin instead.
You could even have prescaler rate wrong, or internal osc could be wrong speed ,so instead of hanging, it could be running a timing routine but taking much longer to complete.
You can check the osc frequency by creating a 1Hz Flasher.
Martin

User avatar
Dan81
Valued Contributor
Valued Contributor
Posts: 268
Joined: Sun Jan 15, 2006 4:07 pm
Location: Albi France
Been thanked: 60 times
Contact:

Re: Microcontroller Systems Engineering with Flowcode

Post by Dan81 »

Hello Rob

I use a 16F887 on Matrix board v3.3 (in stead of 16F877) and my Config1 word is 0x2FF2 with the 19.6MHz Quartz.

If you want to use the internal clock you can try : 0x2FF5 (you can verify the clock on pin RA6)(but not on the Matrix board, Ithink)

nota : with a 16F887 , after programming I need to press the reset switch.

Daniel

Post Reply