floating point

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 4.
To post in this forum you must have a registered copy of Flowcode 4 or higher. To sign up for this forum topic please use the "Online Resources" link in the Flowcode Help Menu.

Moderator: Benj

Post Reply
User avatar
Steve001
Valued Contributor
Valued Contributor
Posts: 1189
Joined: Wed Dec 31, 2008 3:37 pm
Has thanked: 460 times
Been thanked: 523 times
Contact:
Contact Steve001

floating point

Post by Steve001 »

can anybody point me in the wright direction please.

looking to try to dabble in some floating point maths. . have looked on here and there is a weath of infomation.
but not having done this before i am looking for a bit of a " Numptys guide " if anybody can help me out . . :)

steve
Success always occurs in private and failure in full view.
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: floating point

Post by Benj »

Hello,

What target devices are you using? Most devices are straightforward but 8-bit PICs require the use of the functions available from the calculation icon. The calculation help file should help you to understand the floating point functions.
Top
User avatar
Steve001
Valued Contributor
Valued Contributor
Posts: 1189
Joined: Wed Dec 31, 2008 3:37 pm
Has thanked: 460 times
Been thanked: 523 times
Contact:
Contact Steve001

Re: floating point

Post by Steve001 »

Hi benj,
thanks for that
i am using a PIC16F884 I/P mostly and have a PIC16F73-I/SP to play with as well
going to have a go later on

steve
Success always occurs in private and failure in full view.
Top
Post Reply

Return to “Flowcode V4”