Hi All,
Got this error message today anydoy any ideas ?
File name: C:\Users\Ste\Desktop\test file \Flowcode1.c
Generated by: Flowcode v4.5.18.74
Date: Sunday, December 11, 2011 16:26:51
Licence: Professional
Registered to: Stephen Clarke
http://www.matrixmultimedia.com
Launching the compiler...
c:\program files (x86)\matrix multimedia\flowcode v4\boostc\boostc_pic16_flowcode.exe -v -t PIC16F877A "Flowcode1.c"
BoostC Optimizing C Compiler Version 7.04 (for PIC16 architecture)
http://www.sourceboost.com
Copyright(C) 2004-2011 Pavel Baranov
Copyright(C) 2004-2011 David Hobday
Current license key has expired. Please visit http://www.sourceboost.com for updates.
Return code = 100
Flowcode was unable to compile the flowchart's C code due to the following errors:
If your flowchart contains C code, please review this carefully. If your flowchart contains no C-code or you have thoroughly reviewed the code, contact Technical Support.
FINISHED
i closed down flowcode and tried again and got the same message
and had a look round sourceboost site but not sure where to look for the update
steve
error message
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: error message
Hi Steve,
With that message, if it was me I would un-install and reinstall Flowcode. Your registration details will be stored, so no need to re-enter them.
Martin
With that message, if it was me I would un-install and reinstall Flowcode. Your registration details will be stored, so no need to re-enter them.
Martin
Martin
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
Re: error message
Thanks martin
is it flowcode or the compiler that has the problem tho ?
steve
is it flowcode or the compiler that has the problem tho ?
steve
Success always occurs in private and failure in full view.
- JohnCrow
- Valued Contributor
- Posts: 1367
- Joined: Wed Sep 19, 2007 1:21 pm
- Location: Lincolnshire
- Has thanked: 364 times
- Been thanked: 716 times
- Contact:
Re: error message
Hi Steve
Not seen that error message before.
Looks like its a problem with the Sourceboost compiller , rather than Flowcode itself.
As Martin suggests, reloading FC should sort it out, if not it will be a case of waiting for the guys at Matrix to have a look for you.
Not seen that error message before.
Looks like its a problem with the Sourceboost compiller , rather than Flowcode itself.
As Martin suggests, reloading FC should sort it out, if not it will be a case of waiting for the guys at Matrix to have a look for you.
1 in 10 people understand binary, the other one doesn't !
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
Re: error message
cheers guys will have another go tomorrow now as its bit late now and i can see me still at it at 10 pm
Success always occurs in private and failure in full view.
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: error message
No probs Steve,
Hope it helps you out.
I have only seen that issue once a few day ago, but that was with FC4.3 which is out of date now. That was on a laptop I had not used in a while. I do agree with what John says about source boost etc.
Installing FC4.5 sorted that issue out.
Hope it helps you out.
I have only seen that issue once a few day ago, but that was with FC4.3 which is out of date now. That was on a laptop I had not used in a while. I do agree with what John says about source boost etc.
Installing FC4.5 sorted that issue out.
Martin
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
Re: error message
evening all,
just tried again tonight all all appers to be working ok
not done anything to flowcode at all
steve
just tried again tonight all all appers to be working ok
not done anything to flowcode at all
steve
Success always occurs in private and failure in full view.