mLoader Error - Unknown Chip Type

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 6.

Moderator: Benj

chipfryer27
Posts: 185
Joined: Fri Jun 06, 2014 3:53 pm
Has thanked: 115 times
Been thanked: 85 times
Contact:

mLoader Error - Unknown Chip Type

Postby chipfryer27 » Fri Jun 06, 2014 4:31 pm

Hi

Apologies if this is in the wrong area, I thought Flowcode V6 would be the best section. I did have a look around the forum and searched for similar issues but didn't see any too related.

I recently upgraded from V5 to V6, but haven't really had the time to explore all the new features of V6 yet. All software seemed to load OK and I was soon activated. V6 seems happy enough to talk to my EB006 and HP-488 boards when I have some "old favourite" chips installed such as a 16F877A.

The problem I'm now facing is that I wish to use a 18F45K80 chip. I've selected that from Target Chips and a very basic test routine works when simulated (flash LEDs). However when I Compile to Chip I get an mLoader Error - Unknown Chip Type. If I try and AutoDetect Chip Type that fails too.

I'm far from being an expert, and I'm probably doing something stupid, but all help appreciated. The great thing about Flowcode is that it allows non programmers like myself the opportunity to "code" :)

I'm running W7 and Flowcode V6.0.7.0

Thanks in advance.

User avatar
Benj
Matrix Staff
Posts: 14671
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4655 times
Been thanked: 4277 times
Contact:

Re: mLoader Error - Unknown Chip Type

Postby Benj » Fri Jun 06, 2014 4:58 pm

Hello,

That chip is not currently directly supported by the EB006 multiprogrammer.

If you want to program that chip then your best bet is to buy a PICkit 3 programmer and use the ICSP socket on the EB006 or create your own PCB with ICSP socket to the chip.

chipfryer27
Posts: 185
Joined: Fri Jun 06, 2014 3:53 pm
Has thanked: 115 times
Been thanked: 85 times
Contact:

Re: mLoader Error - Unknown Chip Type

Postby chipfryer27 » Fri Jun 06, 2014 5:47 pm

Hi

Thanks for the prompt reply.

Can I ask why Matrix have the 18F45K80 listed as compatible? I'm guessing that the 18F46K80 won't work either (as luck, possibly bad, has it I have a couple of those kicking around too).

Regards.

kersing
Valued Contributor
Valued Contributor
Posts: 1907
Joined: Wed Aug 27, 2008 10:31 pm
Location: Netherlands
Has thanked: 552 times
Been thanked: 1064 times
Contact:

Re: mLoader Error - Unknown Chip Type

Postby kersing » Fri Jun 06, 2014 9:43 pm

You are looking at two products, Flowcode V6 with its compatibility list and the EB006 E-Block with its own compatibility list. Flowcode V6 is compatible with the chips you mention, the EB006 not.
These users thanked the author kersing for the post:
medelec35 (Sun Jun 08, 2014 8:47 am)
Rating: 5%
 
“Integrity is doing the right thing, even when no one is watching.”

― C.S. Lewis

chipfryer27
Posts: 185
Joined: Fri Jun 06, 2014 3:53 pm
Has thanked: 115 times
Been thanked: 85 times
Contact:

Re: mLoader Error - Unknown Chip Type

Postby chipfryer27 » Sat Jun 07, 2014 9:23 am

Hi

Thanks for your reply. I do appreciate the time people give to forums like these.

I'm far from an expert in using microcontrollers, and if and when I have a need I use Flowcode as it allows those of us with little programming knowledge to simply drag-and-drop. Fantastic product in my opinion. When I needed more features from a chip that I'm used to, I went to the Microchip "Maps" page to evaluate, then cross referenced with "Target Chips" to ensure I could do something with it. By that I mean compatible with Flowcode.

I didn't think it unreasonable to assume that if a chip is listed by Matrix as supported then I could use Flowcode to create code and also download it on to the chip using their programmer. Apparently this isn't the case which is a bit of a let down.

I would like to stress that I'm not a programmer and have little knowledge of C or such like. Uni was machine code and that was just a module or two a very long time ago, so a product like Flowcode is perfect for people like me. To follow on from Benj's reply, I'm assuming that I could use Flowcode to compile, then PicKit3 and whatever software that uses to load the code that Flowcode created? Seems a lot of bother and expense to just get more RAM than a 16F877a can give :) (yes I know it is a "mature" chip but my needs rarely change and I only use microcontrollers now and again).

I will look at PicKit3 but I'm not sure the added expense of obtaining such is warranted. If I do go down that route I'm sure I'll be posting more "helps" :) I'm off now to cross reference Flowcode vs EB006. If there is a better way to spend a Saturday I've not found it (how I miss Tiswas).

Thanks again for your time, it is appreciated.

Mark
Posts: 209
Joined: Thu Oct 19, 2006 11:46 am
Location: Bakewell, UK
Has thanked: 20 times
Been thanked: 16 times
Contact:

HP-488 - PPP - Unknown Chip Type

Postby Mark » Thu Jul 03, 2014 6:50 pm

Ben,

The 16F886 is a supported chip for the HP-488 but when I try and program it using FC-6 v 6.0.9.0 it gives the pop up message:

Matrix PIC Microprogrammer
Unrecognised chip on Command Line <16F886>

The chip is then programmed without any problem. So not an immediate problem as such, but you should be aware of it.

The same happens with an unsupported chip, but then of course does not program.

Mark
Go with the Flow.