Flowcode mLoader is showing an error on programming the Formule Flowcode Buggy in Flowcode 8.2.
The laptops used for programming are running Windows 10 1903 Pro Education. Drivers are installed, device management shows the Formula Flowcode buggy.
Formula Flowcode buggy error on programming in FF8
Moderator: Benj
Formula Flowcode buggy error on programming in FF8
- Attachments
-
- image.png
- (47.38 KiB) Downloaded 670 times
-
- image (1).png
- (29.7 KiB) Downloaded 670 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Formula Flowcode buggy error on programming in FF8
Hello,
I've just tested this and it's working fine here. Can you send us your Flowcode project file and I will investigate what the cause might be.
I've just tested this and it's working fine here. Can you send us your Flowcode project file and I will investigate what the cause might be.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Formula Flowcode buggy error on programming in FF8
Project is attached to this message.
Same project on windows 10 lstb 2016 is working fine.
Same project on windows 10 lstb 2016 is working fine.
- Attachments
-
- Flowcode1.fcfx
- (5.91 KiB) Downloaded 136 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Formula Flowcode buggy error on programming in FF8
Hello,
Project looks fine and as it's working fine on another PC I can only assume it's down to the version of Windows. Are there updates you can apply to bring the Windows installation up to date?
The invalid CSV file warning is interesting. I'll see if I can work out what might be causing this.
As a side test you could try manually programming the Flowcode hex file using the BuggyProg software located within the Flowcode 8 installation.
Usually C:\Program Files (x86)\Flowcode 8\tools\Buggyprog\BuggyProg.exe
Let us know how you get on.
Project looks fine and as it's working fine on another PC I can only assume it's down to the version of Windows. Are there updates you can apply to bring the Windows installation up to date?
The invalid CSV file warning is interesting. I'll see if I can work out what might be causing this.
As a side test you could try manually programming the Flowcode hex file using the BuggyProg software located within the Flowcode 8 installation.
Usually C:\Program Files (x86)\Flowcode 8\tools\Buggyprog\BuggyProg.exe
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Formula Flowcode buggy error on programming in FF8
The program BuggyProg sends the hex file without any problem, but the program is not executed on the buggy.
The program mLoader works fine on a windows 1903 Home edition and the hex is executed correctly on the buggy.
The program mLoader is nog working on a windows 1903 Pro education laptop.
The program mLoader works fine on a windows 1903 Home edition and the hex is executed correctly on the buggy.
The program mLoader is nog working on a windows 1903 Pro education laptop.