gLCD cal component

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

Post Reply
JFinlayson
Posts: 93
Joined: Mon Sep 23, 2013 4:33 pm
Has thanked: 5 times
Been thanked: 6 times
Contact:

gLCD cal component

Post by JFinlayson »

I am looking for a cal component or to access the code for gLCD_SSD1963. As it does not support the Character size I require. I am using this in 8 bit 8080 mode. Any advice on accessing the code to add a new larger size than is available would be handy.

Also component Initialization for this does not work but writing my own initialization does. It could be that the chip select pin code is wrong.
The older the boy the bigger the toy

Post Reply