Prototype PCB 40 way
Here is the schematic and the .sch file (again crompressed with 7 zip) not had chance to route the pcb yet
These PCB’s are all very Similar in design and allow for 3.5 or 5 volt dc operation
With a 9 way socket to allow an eblock to be fitted if required.
With a prototyping area for development and terminal blocks for interfacing.
The files are made in eagle 6.01 a licence to open 160 x 80 mm files may be required (hobbyist or greater)
Files are compressed with 7-Zip Please change .txt to .7z as a file ext as wasn't allowed to upload attachment
http://www.7-zip.org/
Steve
proto type pcb for 40 pin ic's
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
proto type pcb for 40 pin ic's
- Attachments
-
- Ste Prototype pcb 40 PIN.txt
- (68.41 KiB) Downloaded 348 times
-
- Ste Prototype pcb 40 PIN.pdf
- (37.89 KiB) Downloaded 390 times
Last edited by Steve001 on Sun May 13, 2012 8:56 pm, edited 1 time in total.
Success always occurs in private and failure in full view.
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: proto type pic for 40 pin ic's
nice, thanks for sharing
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
Re: proto type pic for 40 pin ic's
as prommised routed board
rename .txt as .7z
Steve
rename .txt as .7z
Steve
- Attachments
-
- Ste Prototype pcb 40 PIN.pdf
- (133.34 KiB) Downloaded 425 times
-
- 40 pin.txt
- (185.63 KiB) Downloaded 344 times
Success always occurs in private and failure in full view.