I did some minor changes to a simple program used to help me learn FC, its abilities and limitations and run into this error. Restarting FC does not help, keeps reporting same error. I am attaching my file and a JPG
Currently running FC 6.0.7.
Access violation on compile to hex
Moderator: Benj
-
- Posts: 37
- Joined: Sun Mar 30, 2014 9:27 pm
- Has thanked: 10 times
- Been thanked: 10 times
- Contact:
Re: Access violation on compile to hex
Restarting FC does not fix, restarting W7 does... could it be that some of the modules load up and get corrupted? Wonder which one is used by the compile to hex?
Running FC 6.0.7 on W7
Here's another JPG
Running FC 6.0.7 on W7
Here's another JPG
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Access violation on compile to hex
Hello Ras,
Are you running any specific software on the PC we can try and replicate here. e.g. specific antivirus or firewall or registry management software etc.
Are you running any specific software on the PC we can try and replicate here. e.g. specific antivirus or firewall or registry management software etc.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 37
- Joined: Sun Mar 30, 2014 9:27 pm
- Has thanked: 10 times
- Been thanked: 10 times
- Contact:
Re: Access violation on compile to hex
I noticed now that every time I wake up the PC after it goes to sleep (due to inactivity) the boostc_16F.exe generates this access violation error. The only way to resolve this is to restart the PC.
Hope this helps you identify and fix this problem. If you need additional information from this end please ask.
Hope this helps you identify and fix this problem. If you need additional information from this end please ask.