Internal RF component

Please add any feature requests for Flowcode version 6 here

Moderator: Benj

Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
MJU
Posts: 430
Joined: Wed Nov 07, 2007 6:51 pm
Location: Antwerp Belgium
Has thanked: 105 times
Been thanked: 94 times
Contact:

Internal RF component

Postby MJU » Mon Apr 28, 2014 11:32 pm

I recently discovered the PIC's with RF capability. (like the rfPIC12F675).

Wouldn't it be great to have an "internal RF component" like the "internal CAN component"?
I have the RF Eblocks, but it would be great to implement this feature straight onto the PCB without extra IC's?

So my new feature request is an "internal RF component"..

Thanks for implementing this features before the end of the week! :lol:

stewartbaker
Posts: 116
Joined: Tue Jul 17, 2012 9:34 am
Been thanked: 18 times
Contact:

Re: Internal RF component

Postby stewartbaker » Tue Apr 29, 2014 9:39 am

Thanks for the "Heads up" on that interesting device. I can see lots of potential projects on the horizon.

A Flowcode component would be great.

Stewart

User avatar
Benj
Matrix Staff
Posts: 14432
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4499 times
Been thanked: 4182 times
Contact:

Re: Internal RF component

Postby Benj » Tue Apr 29, 2014 10:18 am

Hello,

I've done a bit of digging around and managed to find this.

Demo.zip
(101.34 KiB) Downloaded 77 times


All written in assembler but should be possible to confirm it's working and then port the code across into a Flowcode 6 component.

I really don't have much time on my hands at the moment to look at things like this but I will try and help if you decide to have a go.

MJU
Posts: 430
Joined: Wed Nov 07, 2007 6:51 pm
Location: Antwerp Belgium
Has thanked: 105 times
Been thanked: 94 times
Contact:

Re: Internal RF component

Postby MJU » Wed Apr 30, 2014 12:34 am

Benj wrote:I've done a bit of digging around and managed to find this.

Demo.zip


All written in assembler but should be possible to confirm it's working and then port the code across into a Flowcode 6 component.

I really don't have much time on my hands at the moment to look at things like this but I will try and help if you decide to have a go.


Ha, thank you,
I don't have the target device yet, but when Matrix offers a ready to use component, I will certainly buy the device :)

I don't like to get into code too deep, so that's the reason I'v bought FC (from early version 3 on).
This is why I've posted this feature in the feature request.
Instead of the end of the week I will give you another month? Fair enough? (*)

(*) just a joke..
These users thanked the author MJU for the post:
Benj (Wed Apr 30, 2014 10:29 am)
Rating: 5.26%