[Solved] ICD unusable from 6.0.9

[EtsDriver]

ICD function seems now unusable on all PIC and AVR devices (cannot select ICD button under "Debug"--->"ICD mode"-->No underoptions).
I dont see any options anymore to go and turn it on. (In project settings) Stupid me.
https://www.dropbox.com/s/qt79b0h8tc3o7 ... shot_1.png

[medelec35]

Hi EtsDriver,
Enabling ICD is no long done in Project settings.
You now have to enable from the Debug Menu.
Go into options to make sure it's all set up correctly.

Martin

[EtsDriver]

Please take look at the picture at first post. It shows the button where it was used to be done.

[medelec35]

Please take look at the picture at first post. It shows the button where it was used to be done.

I probably read you post before you posted picture, so did not see it
Have you got the professional version of V6?

I believe ICD is available for professional versions only.

[EtsDriver]

Oh thanks
My licence had defaulted to home edition after upgrading, had to do reactivation using my Matrix Username and Password. Thanks for talking about licence!

https://www.dropbox.com/s/5osyyypeknsx5cc/Sieppaa.PNG
After reactivation:
https://www.dropbox.com/s/3kq2uevq0mieij7/after.PNG

EDIT: Fixed the image links.

[medelec35]

No problem.

licence had defaulted to home edition after upgrading

That does appear to be the cause of ICD not showing.
Can't see the images you have posted.

[EtsDriver]

No problem.

licence had defaulted to home edition after upgrading

That does appear to be the cause of ICD not showing.
Can't see the images you have posted.

Should be able to see images now.