Hello,
I would suggest/request to add in future, if it is possible, next communications protocols used in many lighting applications:
- DALI
- DMX
- KNX
It would be a valuable tool for many programers and I think will increase the sales of FlowCode.
Lighting communication protocols
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Lighting communication protocols
Hello,
I've had a quick go at DMX Master & Slave and I think I am now pretty much there. Just need to test the code actually works on some hardware.
As for the other two I will add them to the list and see how easy they would be to roll out.
I've had a quick go at DMX Master & Slave and I think I am now pretty much there. Just need to test the code actually works on some hardware.
As for the other two I will add them to the list and see how easy they would be to roll out.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Lighting communication protocols
Looking at DALI it also looked quite a simple protocol so I have also generated Master/Slave components to drive this. Again they need some polish but most of the code is in place now.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 190
- Joined: Mon Jul 07, 2014 9:38 am
- Has thanked: 30 times
- Been thanked: 77 times
- Contact:
Re: Lighting communication protocols
When you say „I generated Master/Slave components“ what does exactly mean?:
- Would they be included/released in the next FlowCode upgrade or new version? By default? Or attached optional?
- Can we add those components in the existing FlowCode 6 version? Will you upload/publish them here?
- Are they just pieces of software/program or components similar with RS232 or USB or any other default communication components in the existing FlowCode 6 version?
- Would they be included/released in the next FlowCode upgrade or new version? By default? Or attached optional?
- Can we add those components in the existing FlowCode 6 version? Will you upload/publish them here?
- Are they just pieces of software/program or components similar with RS232 or USB or any other default communication components in the existing FlowCode 6 version?
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Lighting communication protocols
Hello,
I've got to add a bit of polish and I'm out of the office today so can't do it right now, however the code is now pretty much ready for export to components (e.g. like RS232 or USB).
Both DMX and DALI have master and slave components allowing you to create both master controllers and slave receivers.
They will likely be included in the next release of Flowcode due at the start of Oct but I will probably release them here tomorrow so you can add them into your current installation.
The DMX components will require the "Pro" license type as they utilize the CAL UART component which is already under license. The DALI components are bit banged so I might release them as a sweetener for the chip pack only version.
I've got to add a bit of polish and I'm out of the office today so can't do it right now, however the code is now pretty much ready for export to components (e.g. like RS232 or USB).
Both DMX and DALI have master and slave components allowing you to create both master controllers and slave receivers.
They will likely be included in the next release of Flowcode due at the start of Oct but I will probably release them here tomorrow so you can add them into your current installation.
The DMX components will require the "Pro" license type as they utilize the CAL UART component which is already under license. The DALI components are bit banged so I might release them as a sweetener for the chip pack only version.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Lighting communication protocols
Hello,
Here are the exported components. If you give them a go then please let me know how you get on.
To add the components to your installation copy the .fcpx file into your "C:\Program Files (x86)\Flowcode 6\components" directory and restart Flowcode.
Here are the exported components. If you give them a go then please let me know how you get on.
To add the components to your installation copy the .fcpx file into your "C:\Program Files (x86)\Flowcode 6\components" directory and restart Flowcode.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel