DS3231 on FCV5

[bercioiu]

I`m working on a wristwatch. The HV it`s almost ready. In the mean time, I want to work at the software, but encountered a problem, I cant handle with DS3231. I thought it is the same as in 1307 but it does not work at all...
There is anybody on that forum to help me with an example with DS3231 for Flowcode V5?

Thank you in advance!

Puiu,

[Dan81]

Hello

Did you connect all the pins (5 to 13) to ground ?

Daniel

[bercioiu]

Yep, mean time I manage to communicate with it... But still need help to use all feature of the chip (temp, alarm, etc.).
Also, I need help to display on 7segment some custom characters.
Thank you!

Puiu,

[bercioiu]

Just out of curiosity: For version 5 of Flowcode is still providing support?
Thank you!

[Benj]

Hello,

Sorry for the delay yes v5 is still under support.

Let us know if you get stuck with the alarm and temp functionality. Also if you post what you have so far or even better a simplified version of what you need to get working then we can try and dig in and help.

Custom characters on the 7-seg can be achieved by writing values directly to the port to correspond to the LEDs on the display you want to light.

[bercioiu]

I already solved, thanks for the support.

[jgu1]

Hi Bericou!

Is it a project you will share, I'm curious.

Best regard

Jorgen

[bercioiu]

When will be ready, i`ll post all files. It is an wrist clock with 7 segment leds.
For the moment, I have some trouble with the charger on board for the Li-Po accu...

[jgu1]

Hi!

Wery Nice project. Thank's. Look forward to see the code.


Jorgen