Hi,
I use a ESP8266 with firmware v0.9.2.2 AT. A join AP takes about 3-4 seconds and everything works.
Now I have the ESP8266 updated to firmware v0.9.5.2 AT, here takes a join AP up to 6 seconds and at the next instruction comes a busy message.
Is there a option for the WLAN macro to extend or adjust the timeout?
Thanks in advance for the help!
Tiny
Help please for ESP8266, Timeout at Join AP
Moderator: Benj
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Help please for ESP8266, Timeout at Join AP
Hello Tiny,
Please find the attached component with a new parameter for the ConnectToSSID macro allowing you to specify the timeout time in seconds. The timeout used to be fixed at 2 seconds.
Let me know how you get on.
Please find the attached component with a new parameter for the ConnectToSSID macro allowing you to specify the timeout time in seconds. The timeout used to be fixed at 2 seconds.
Let me know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
tiny
- Posts: 200
- Joined: Wed Jul 08, 2009 8:29 am
- Has thanked: 51 times
- Been thanked: 93 times
- Contact:
Re: Help please for ESP8266, Timeout at Join AP
Hi Benj,
many thanks for the help. So it works great with the new firmware!
Tiny
many thanks for the help. So it works great with the new firmware!
Tiny