internal ocillator frequency

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
dz28
Posts: 60
Joined: Thu Aug 04, 2016 3:30 pm
Has thanked: 7 times
Been thanked: 9 times
Contact:
Contact dz28

internal ocillator frequency

Post by dz28 »

Using the PIC12f1572
In project options INTOSC is selected
I do not see where to select the oscillator frequency.

Data sheet shows selections for several frequencies along with 4xPLL option

The project compiles and chips seem to program and run fine
A frequency must be being selected somewhere

Thanks,
DC
Top
kersing
Valued Contributor
Valued Contributor
Posts: 2045
Joined: Wed Aug 27, 2008 10:31 pm
Location: Netherlands
Has thanked: 553 times
Been thanked: 1081 times
Contact:
Contact kersing

Re: internal ocillator frequency

Post by kersing »

You need to add a C icon to configure the oscillator frequency. See this WIKI page for an explanation. Use the IntOsc Helper component to determine the value.
“Integrity is doing the right thing, even when no one is watching.”

― C.S. Lewis
Top
medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:
Contact medelec35

Re: internal ocillator frequency

Post by medelec35 »

Not a bug so moved to a more appropriate section
Have you also read this post?

Martin
Martin
Top
dz28
Posts: 60
Joined: Thu Aug 04, 2016 3:30 pm
Has thanked: 7 times
Been thanked: 9 times
Contact:
Contact dz28

Re: internal ocillator frequency

Post by dz28 »

Thanks!

dc
Top
Post Reply

Return to “Flowcode V7”