Hi
After applying the latest patch for Flowcode 7 the project will not compile to hex any more
the problem is in the Servo_Controller.fcpx , reverting to the old file fixes the problem but stuck with
the old version .
I am using Arduino 2560 R3 .
Thanks
After applying Patch 7.1.1
Moderator: Benj
- Alan_37
- Posts: 179
- Joined: Sun May 01, 2016 8:36 pm
- Has thanked: 51 times
- Been thanked: 54 times
- Contact:
After applying Patch 7.1.1
- Attachments
-
- compile.png
- (24.25 KiB) Downloaded 2644 times
-
- c.file.png
- (26.02 KiB) Downloaded 2644 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: After applying Patch 7.1.1
Many thanks for letting us know.
This component should fix the problem. Simply copy the file into your "Flowcode 7/components" directory and this should solve the issue.
Let us know how you get on.
This component should fix the problem. Simply copy the file into your "Flowcode 7/components" directory and this should solve the issue.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Alan_37
- Posts: 179
- Joined: Sun May 01, 2016 8:36 pm
- Has thanked: 51 times
- Been thanked: 54 times
- Contact:
Re: After applying Patch 7.1.1
Hi Benj
Yes That Fixed the Servo Problem 100% thanks .
Now just found another problem related to the patch but this time i didn't had the time
to investigate , the only thing i know is that it stops executing commands from SD Card after
about 10 commands or so replacing FAT.fcpx with the old file Fixes the problem 100%
Hope you can find the problem .
Thanks
Yes That Fixed the Servo Problem 100% thanks .
Now just found another problem related to the patch but this time i didn't had the time
to investigate , the only thing i know is that it stops executing commands from SD Card after
about 10 commands or so replacing FAT.fcpx with the old file Fixes the problem 100%
Hope you can find the problem .
Thanks
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: After applying Patch 7.1.1
Hello Alan,
That's brilliant thanks for letting us know.
Please can you try the new FAT component here and see if this fixes the problems you're having.
http://www.matrixtsl.com/mmforums/viewt ... 356#p78721
Many thanks.
That's brilliant thanks for letting us know.
Please can you try the new FAT component here and see if this fixes the problems you're having.
http://www.matrixtsl.com/mmforums/viewt ... 356#p78721
Many thanks.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Alan_37
- Posts: 179
- Joined: Sun May 01, 2016 8:36 pm
- Has thanked: 51 times
- Been thanked: 54 times
- Contact:
Re: After applying Patch 7.1.1
Hi Benj,
Yes the file from that post Fixes the SD Card Problem 100%.
Please update the patch with these files .
Thanks very much for your fast support
Yes the file from that post Fixes the SD Card Problem 100%.
Please update the patch with these files .
Thanks very much for your fast support