I'm very puzzeled as to why my Quad display will not work on the breadboard
I have looked the the Quad settings and also the chip parameters and everything looks and runs 100%.
I can only get 1 display to light up in the Quad
I have no open leads on the build
I have tried everything I can think of but the Com lines don't work as in flowcode
The Quad is a Common Cathode
I have attached my drawing and the Flowcode
The pushbuttons and Leds work just no the Quad
2 days and just can't see the fault
John
Flowcode not working in live build
Moderator: Benj
- JLeith
- Posts: 537
- Joined: Wed Nov 14, 2012 7:49 pm
- Location: British Columbia Canada
- Has thanked: 146 times
- Been thanked: 26 times
- Contact:
Flowcode not working in live build
- Attachments
-
- Halloween Spooky counter 2017.fcfx
- (54.6 KiB) Downloaded 290 times
-
- Circuit layout
- Drawing.jpg (298.96 KiB) Viewed 3425 times
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Flowcode not working in live build
Hi John,
Happy New Year.
Issue is with setting up of the timer interrupt.
Double click on the interrupt to show properties.
You will need to change from to
Perhaps you can also change from
Martin
Happy New Year.
Issue is with setting up of the timer interrupt.
Double click on the interrupt to show properties.
You will need to change
Code: Select all
Clock Source Select
Code: Select all
Transition on T0CKI pin
Code: Select all
Internal clock (CLKO)
Code: Select all
Prescaler Rate
Code: Select all
1:1 to 1:32
Martin
- JLeith
- Posts: 537
- Joined: Wed Nov 14, 2012 7:49 pm
- Location: British Columbia Canada
- Has thanked: 146 times
- Been thanked: 26 times
- Contact:
Re: Flowcode not working in live build
Hello Martin
All the best for 2017
I have hard copies of our conversations since the begiinings and I could not find that glitch.
I tried to use an old design and just modify the actions and never thought that the flowcode simulatiuon would not give me help when it works in flowcode and not when programmed to live action
I think many users build the design and then build the live model.
I attached a picture for others to be aware if they search for answers.
I know my project for Halloween is early but it takes me a while to make projects happen.
Your help has always be a saving part.
Thank you
All the best for 2017
I have hard copies of our conversations since the begiinings and I could not find that glitch.
I tried to use an old design and just modify the actions and never thought that the flowcode simulatiuon would not give me help when it works in flowcode and not when programmed to live action
I think many users build the design and then build the live model.
I attached a picture for others to be aware if they search for answers.
I know my project for Halloween is early but it takes me a while to make projects happen.
Your help has always be a saving part.
Thank you
- Attachments
-
- Timer Interupt.jpg (88.7 KiB) Viewed 3399 times