I have a doubt and I do not know what is due, it is that when you start the simulation inside the console to display the values of the EEPROM the values are always recorded: 00-01-02-03-41-62-48-65 -6C-6C-6F in the first positions of memory and I do not know what is due because at the beginning I never tell you to record anything. . This I have tried with several pic being the result always the same.
Then when making use of saving a byte in position 0 of the EPROM. in the simulation I always see that the appropriate value is recorded (in the rest of the positions the values indicated above are still maintained).
Can you clarify this point?
Thank you
EEPROM values: 00-01-02-03-41-62-48-65 -6C-6C-6F
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: EEPROM values: 00-01-02-03-41-62-48-65 -6C-6C-6F
Hi,
They are just the initial values found within EEPROM properties: If you don't want those initial values to appear, then they can be deleted from initial values.
The purpose of initial values is just to demonstrate the various formats of EEPROM data that's allowed, and to show you can set up to have initial values.
They are just the initial values found within EEPROM properties: If you don't want those initial values to appear, then they can be deleted from initial values.
The purpose of initial values is just to demonstrate the various formats of EEPROM data that's allowed, and to show you can set up to have initial values.
Martin
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact: