Pickit 2 and Flowcode 5

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 5.
To post in this forum you must have a registered copy of Flowcode 5 or higher.

Moderator: Benj

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8420
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2405 times
Been thanked: 3437 times
Contact:

Re: Pickit 2 and Flowcode 5

Postby medelec35 » Mon Feb 11, 2019 5:49 pm

Hi John,
There is nothing within your flowchart I can look at that will help.
Reason being we need to deal with programmer settings.
As you have started form fresh, I'm assuming the programmer settings are pointing to

Code: Select all

 C:\Program Files (x86)\Flowcode\v5\Tools\PPP\PPPv3.exe
.
So it's looking for EB006 which you don't have.

What programmer have you got connected?
My advice is to make sure you can manually import hex file and program target device before setting up Flowcode to send directly to hex

What are your programmer settings?
These users thanked the author medelec35 for the post:
JDR04 (Thu Feb 14, 2019 12:44 pm)
Rating: 5.26%
 
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.

JDR04
Posts: 264
Joined: Tue Mar 05, 2013 10:49 pm
Has thanked: 111 times
Been thanked: 13 times
Contact:

Re: Pickit 2 and Flowcode 5

Postby JDR04 » Mon Feb 11, 2019 11:07 pm

Hi Martin, I think Ill wait for the mikroprog to arrive (now tuesday) and then start again .What do you think?

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8420
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2405 times
Been thanked: 3437 times
Contact:

Re: Pickit 2 and Flowcode 5

Postby medelec35 » Mon Feb 11, 2019 11:10 pm

Nothing wrong with have both, so you have a backup.
It's your call.
These users thanked the author medelec35 for the post:
JDR04 (Wed Feb 13, 2019 9:22 pm)
Rating: 5.26%
 
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.

JDR04
Posts: 264
Joined: Tue Mar 05, 2013 10:49 pm
Has thanked: 111 times
Been thanked: 13 times
Contact:

Re: Pickit 2 and Flowcode 5

Postby JDR04 » Wed Feb 13, 2019 9:27 pm

Ok, got mikroprog connected.Would you be kind enough to have a look at the settings for me and point out where i went wrong please.I have not made any changes to the program itself.

Thanks for your help again. John
Attachments
Mikroprog 2.jpg
Mikroprog 2.jpg (150.12 KiB) Viewed 1144 times
MIKROPROG 1.jpg
MIKROPROG 1.jpg (152.05 KiB) Viewed 1144 times
SETUP LIGHT1.fcf
(8.5 KiB) Downloaded 39 times

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8420
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2405 times
Been thanked: 3437 times
Contact:

Re: Pickit 2 and Flowcode 5

Postby medelec35 » Thu Feb 14, 2019 7:53 am

Hi John,
You do not have to change the configuration settings withing mikroProg Suite.
They will automatically transfer from Flowcode.
The only thing your fcf file will show me is the osc speed and configuration settings.
It will not show your compiler setting as that is personal to your setup and is stored within the registry.
To get you going for now, looking at PIC12F683 datasheet the default internal osc speed is 4MHz.
So change the 20000000 to 4000000.
Since the new programmer supports command line options, then you can load the attached file within Flowcode.
To do that goto Build, Compiler options.
Select Programmer tab
Select Import then load attached file.
Enter a name e.g mikroProg where you see <current>, then save.
If Flowcode reports can't find your programmer then on the Location part of programmer tab, Select Browse and manually select mikroProg Suite For PIC.exe file.
Attachments
mikroProg.FCS
(553 Bytes) Downloaded 41 times
These users thanked the author medelec35 for the post:
JDR04 (Thu Feb 14, 2019 10:30 am)
Rating: 5.26%
 
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.

JDR04
Posts: 264
Joined: Tue Mar 05, 2013 10:49 pm
Has thanked: 111 times
Been thanked: 13 times
Contact:

Re: Pickit 2 and Flowcode 5

Postby JDR04 » Thu Feb 14, 2019 12:43 pm

Hi Martin, I'm up and running. Thanks so very much for your patience and help on this. Take care....John

User avatar
medelec35
Valued Contributor
Valued Contributor
Posts: 8420
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2405 times
Been thanked: 3437 times
Contact:

Re: Pickit 2 and Flowcode 5

Postby medelec35 » Thu Feb 14, 2019 1:00 pm

Hi John,
You're welcome.
Glad you are up and running.
Thanks for letting me know.
These users thanked the author medelec35 for the post:
JDR04 (Fri Feb 15, 2019 9:34 am)
Rating: 5.26%
 
Martin

If you read a post that is useful, please show appreciation by clicking on thumbs up Icon.