Using a PIC16LF15354 and am trying to use RA7 (IOCA7/CLKIN) as an interrupt input.
Flowcode won't let me assign that pin as an interrupt. My guess is that is may have something to do with the clock assignment.
I have configured it for Software Oscillator Mode: HFINTOSC 1 MHz. Everything else disabled. (Clock Switch Enable tried both ways)
Is there anything I am missing?
Thanks,
Bep
Can't assign interrupt on CLKIN
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Can't assign interrupt on CLKIN
Hi Bep,
Thanks for letting us know of the issue.
I've found and fixed the problem for you now. The fix should now be available via the update system.
Let us know how you get on.
Thanks for letting us know of the issue.
I've found and fixed the problem for you now. The fix should now be available via the update system.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel