Hi guys,
I keep getting this message whilst working on a flowchart in the latest version of both Flowcode and Windows 7.
It only happens when I work using a PIC10F206 as the target device...
It happens just out of the blue whether or not the simulation is running:
"Problem signature:
Problem Event Name: APPCRASH
Application Name: Flowcode_PIC.exe
Application Version: 4.3.7.63
Application Timestamp: 4ba3bb56
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdaae
Exception Code: e06d7363
Exception Offset: 00009617
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 8a94
Additional Information 2: 8a9445c05ab1d9d4c789c8514fa9fd1f
Additional Information 3: 6404
Additional Information 4: 6404e625148c49bfcf9c87bec233459b"
Any ideas please - I'm trying to incorporate some assembly from the Microchip webpage which is specifically written for that device...
James :-}
Flowcode 4 keeps crashing with Windows 7...
Moderator: Benj
- DavidA
- Matrix Staff
- Posts: 1076
- Joined: Fri Apr 23, 2010 2:18 pm
- Location: Matrix Multimedia Ltd
- Has thanked: 58 times
- Been thanked: 258 times
- Contact:
Re: Flowcode 4 keeps crashing with Windows 7...
Hello,
I will try and replicate the error you are getting here and see if we can find out whats causing your issue.
I will try and replicate the error you are getting here and see if we can find out whats causing your issue.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Flowcode 4 keeps crashing with Windows 7...
Hello James,
Are you still getting this error?
Are you still getting this error?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 267
- Joined: Mon Sep 14, 2009 10:34 am
- Has thanked: 30 times
- Been thanked: 19 times
- Contact:
Re: Flowcode 4 keeps crashing with Windows 7...
Hi Ben,
No idea why but I was also getting the "Incorrect Language" error which I fixed using the info from Steve Tandy elsewhere in this forum and since then it has never happened.
Probably not related but it's OK.
On the RC5 front I was trying to decode a Sky TV remote which uses a slightly different variation of RC5 - RC6 - just my luck!
It's here: http://www.arduino.cc/cgi-bin/yabb2/YaB ... 1231706417
Any helpful techies that can convert that to run on the Matrix hardware has a beer or three on the way from me!
Best regards,
James
No idea why but I was also getting the "Incorrect Language" error which I fixed using the info from Steve Tandy elsewhere in this forum and since then it has never happened.
Probably not related but it's OK.
On the RC5 front I was trying to decode a Sky TV remote which uses a slightly different variation of RC5 - RC6 - just my luck!
It's here: http://www.arduino.cc/cgi-bin/yabb2/YaB ... 1231706417
Any helpful techies that can convert that to run on the Matrix hardware has a beer or three on the way from me!
Best regards,
James