Hi,
I recently bought a new netbook (HP Pavilion dm1) as my previous one has a BSOD...
- 32 bit OS
- Windows 7
Installing Flowcode v3 and the driver went well.
I tried using PPPv3 to detect the PIC on the multiprogrammer, but I always get the message "USB cable is not connected". This message also appears when trying to send the hex file from Flowcode.
I disabled the suspend settings of the USB by doing :
- CONTROL PANEL | Power Options
- click on Change Plan Settings for the plan you want to change
- click on Change advanced power settings
- disable USB selective suspend settings
Also, the programmer is being detected and I can see it in the device manager.
What's the problem ?
PS: I need to fix this ASAP, I still need to end my school project.
USB cable is not connected
-
- Posts: 594
- Joined: Thu Sep 17, 2009 7:52 am
- Location: Belgium
- Has thanked: 63 times
- Been thanked: 102 times
- Contact:
- DavidA
- Matrix Staff
- Posts: 1076
- Joined: Fri Apr 23, 2010 2:18 pm
- Location: Matrix Multimedia Ltd
- Has thanked: 58 times
- Been thanked: 258 times
- Contact:
Re: USB cable is not connected
Hi,
Sometimes windows shuts off the boards to save power on newer laptops/desktops.
Try this:
Control Panel >> System >> Device Manager
Find the hardware listed, sometimes under Custom USB Devices:
(Right-Click on the device) Properties >> Power Management >> Untick - Allow the computer to turn off this device to save power
Let me know if that helps
Sometimes windows shuts off the boards to save power on newer laptops/desktops.
Try this:
Control Panel >> System >> Device Manager
Find the hardware listed, sometimes under Custom USB Devices:
(Right-Click on the device) Properties >> Power Management >> Untick - Allow the computer to turn off this device to save power
Let me know if that helps
-
- Posts: 594
- Joined: Thu Sep 17, 2009 7:52 am
- Location: Belgium
- Has thanked: 63 times
- Been thanked: 102 times
- Contact:
Re: USB cable is not connected
I think that's already done.
I'm going to check that right now.
EDIT:
Just checked again and it wasn't done , my bad.
I didn't test it but I'm pretty sure the problem is solved.
Thanks David
I'm going to check that right now.
EDIT:
Just checked again and it wasn't done , my bad.
I didn't test it but I'm pretty sure the problem is solved.
Thanks David