E-blocks internet board EB023

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

User avatar
Steve001
Valued Contributor
Valued Contributor
Posts: 1104
Joined: Wed Dec 31, 2008 3:37 pm
Has thanked: 453 times
Been thanked: 505 times
Contact:

E-blocks internet board EB023

Postby Steve001 » Sun Aug 07, 2011 8:17 pm

HI,

Got a couple of idea's lurking for some projects and have a couple of questions about the internet pcb.

is it still in production as the page is blank ( have visted several time and still blank)

can you issue telnet intructions via the e block ?

is it possable to ask the gateway for the time and date stamp ?

is a web page loaded into the rom of the network chip that can be customised ?

steve
Success always occurs in private and failure in full view.

User avatar
JohnCrow
Valued Contributor
Valued Contributor
Posts: 1367
Joined: Wed Sep 19, 2007 1:21 pm
Location: Lincolnshire
Has thanked: 381 times
Been thanked: 716 times
Contact:

Re: E-blocks internet board EB023

Postby JohnCrow » Sun Aug 07, 2011 9:11 pm

Hi Steve

The link to the board from the e-blocks page does seem to be dead
The data sheet is still in the support section though.

http://www.matrixmultimedia.com/eblock_datasheets.php#EB023

Its a nice board, I've played with it a bit
Supports
UDP/ TCP-IP / Webserver though not sure about telnet
If you open the component in FC and look at the help files, they are quite comprehensive.

Do remember seing a post a while back on here that Matrix were going to develop a new board.
These users thanked the author JohnCrow for the post:
Steve001 (Mon Aug 08, 2011 8:21 pm)
Rating: 5.26%
 
1 in 10 people understand binary, the other one doesn't !

User avatar
Benj
Matrix Staff
Posts: 14584
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4607 times
Been thanked: 4242 times
Contact:

Re: E-blocks internet board EB023

Postby Benj » Mon Aug 08, 2011 2:43 pm

Hello,

Sorry this was caused by a bug in the recently improved "also bought" mechanism. The product is now available again via the products page.
These users thanked the author Benj for the post:
Steve001 (Mon Aug 08, 2011 8:21 pm)
Rating: 5.26%
 

User avatar
Steve001
Valued Contributor
Valued Contributor
Posts: 1104
Joined: Wed Dec 31, 2008 3:37 pm
Has thanked: 453 times
Been thanked: 505 times
Contact:

Re: E-blocks internet board EB023

Postby Steve001 » Mon Aug 08, 2011 8:22 pm

thanks for that will go have a look

steve
Success always occurs in private and failure in full view.