Matrix - Formula Flowcode Motor and Gearbox problems
23 users online | 23 Guests and 0 Registered

Formula Flowcode Motor and Gearbox problems


Hardware : HP629 Formula Flowcode Micromouse



Symptoms :


One of the wheels is sticking or is harder to turn then normal.

Cause :


Looking at the gearing of a problematic buggy, there was a little fragment of black plastic wedged in the nylon gears.

Solution :


After removing the fragment of plastic the gear train runs very free and easy.

I recommend that any customers who are having problems with the micromouse's motors or gearing to do the following.

1) Remove the top PCB from the Chassis using the 4 self tapping screws.
2) Remove the lid of the gear box cover using the 4 screws on the chassis.
3) Check the gears carefully for burrs, blemishes, fragments etc
4) Apply a small amount of grease to the gears to aid the movement
5) Reassemble your buggy and your motor / gear functionality should be greatly improved (probably better then new as the gears on new chassis' are not greased)
6) Make sure that the gearbox cover is fitted back in place correctly and then screwed on tight. Most of the motor problems arise from this cover being loose or poorly fitted.

Last update:
2015-03-31 12:21
Author:
DavidA
Revision:
1.0
Average rating:0 (0 Votes)

You cannot comment on this entry

Chuck Norris has counted to infinity. Twice.

Home | Website Disclaimer | Returns Policy | Privacy Policy | Copyright Matrix Technology Solutions Ltd 2024
Chinese German Spanish French Greek Italian Dutch Russian Google translations