Search found 7 matches

Return

by Benj
Mon Nov 28, 2011 6:23 pm
Jump to forum
Jump to topic

Re: Again wishes for the Glcd..

Hello Mika, It might be worth changing your port definitions to lat definitions in the custom component properties. Anywhere you refer to a port try replacing with lat. note this will only work for outgoing ports. looking at your code it could be the %a, %c and %e substitutions should change from po...
by DavidA
Wed Oct 10, 2012 9:10 am
Jump to forum
Jump to topic

Re: Autosave

This is something we are looking into, it would be soemthing you could turn on or off in global settings and would be entirely seperate from the main Flowcode file you are working on (ie it would create a Flowcode_auto.fcf) or something similar.
by beambase
Fri Oct 12, 2012 8:35 am
Jump to forum
Jump to topic

Re: CAN Bus Programming

Hello during the years I have developed some practical knowledge about CAN bus cabeling in industral systems focused on safety and there are some rules that should be folloed: 1 Cabeling I normaly use a cable with one data pair for the CAN bus and one pair to supply 24V bus power to the nodes. By us...
by Benj
Tue Oct 16, 2012 11:28 am
Jump to forum
Jump to topic

Re: GLDC!

Hello,

This page is a bit outdated now but still lists all the original custom components including the KS0108 display.

http://www.matrixmultimedia.com/Flowcode_Components.php
by Tony Brown
Wed Aug 15, 2012 11:07 am
Jump to forum
Jump to topic

Re: 128 x 64 glcd

Hi All this is the first time that I have put any help on here but I hope it helps. Im using the ks0107/0108 graphic LCD 128x64. To get it to work in flowcode I downloaded the custom_code.c file (see attachment Custom_code.c), renamed it to FC5_PIC_Custom.C, and copy and pasted it into: Program file...
by Benj
Wed Oct 17, 2012 11:38 am
Jump to forum
Jump to topic

Re: Bugs (maybe fix), and suugestiong for Flowcode5 for DsPI

Hi Mika, I am in the process of ordering some 1 wire sensors to have a play with. In the mean time I have sent you a PM with a 30 day v5 PIC trial key so you can install and test the 8-bit software. with v5 all the variants use the same code base so if we get it fixed for one then it should sort its...
by brandonb
Thu Nov 22, 2012 9:24 am
Jump to forum
Jump to topic

removing smd chips without effort

i recently converted the boards i create for fun to all surface mount components, and since im paranoid i bought a pack of this https://www.sparkfun.com/products/10925? well i had a situation with a 18f26k80 chip that wouldnt do much of anything and had to remove it, applying some of the special flu...