Search found 7 matches

Return

by fotios
Wed Aug 31, 2011 12:32 pm
Jump to forum
Jump to topic

Re: RC5 on a 16F88

Hello Sean & Bernard Just now i came accross the FlowCode new RC5 component, help file. After reading (most carefully this time) the component macros, i made a new program using these macros. I used exactly the same hardware configuration that described in my previous post. The program runs with...
by Sean
Wed Aug 31, 2011 10:55 am
Jump to forum
Jump to topic

Re: RC5 on a 16F88

Your program, using the RC5 component, should work. Generating a 1ms pulse every time a valid signal is received. If you are using the EB060 RC5 E-Block, or similar hardware, the received signal will be inverted. The 'Invert signal' check box in the component property panel needs to be checked to co...
by Benj
Wed Sep 25, 2013 4:51 pm
Jump to forum
Jump to topic

Re: Help to create a gLCD_KS0108 variant

Hello, Were working on a release and I built the component using the release build DOH!! The release should happen today so you should be able to use this to check if the component is fixed. For now I've rebuilt using an older version so let me know if you can add this. gLCD_KS0108.fcpx Note that my...
by Jordy101091
Tue Mar 25, 2014 5:07 pm
Jump to forum
Jump to topic

Re: DS1307 - RTC Time Keeper

Hi Jordy, Should be really nice :wink: Wich algorithm are you using ? Regards, Bernard I have updated the component to version 1.65 which includes the Day of week calculation. From now on you don't have to enter this value. If you used version 1.64 and lower then you need to re-enter the macro Writ...
by Jordy101091
Sun Mar 23, 2014 5:29 pm
Jump to forum
Jump to topic

Component Creation Tutorials

Hi all, I thought it would be a really good time to wright my own tutorials based on my experience in creating components for flowcode. I sometimes see that people ares struggling to create ore start creating there own components, that was the reason for me to make tutorials available to the flowcod...
by LeighM
Mon May 19, 2014 1:14 pm
Jump to forum
Jump to topic

Re: Problem LCD component

Hi

I've found the bug.
Please use the attached file for now (drop it into your ..\CAL\PIC folder)
(Still needs further work as a previous bug fix caused this issue, so I need to now fix the other bug :wink:

Leigh
by Benj
Thu Jun 05, 2014 5:05 pm
Jump to forum
Jump to topic

Re: Writing values in internal EEPROM

Hello, I think I have now fixed the problem, it seemed the EEPROM component had a cap on how many characters were in the initialiser string so I have now upped this to 1000 characters which seems to be making it work through to the C correctly. eeprom.fcpx #ifdef MX_CAL_PIC #pragma DATA _EEPROM, 0,0...