Search found 79 matches

Return

by STibor
Wed Jul 30, 2014 7:04 pm
Jump to forum
Jump to topic

Re: Enabling internal pull-ups on AVR's

Write down the following C code.

Code: Select all

PORTB = (1<<PB7)|(1<<PB6)|(1<<PB5)|(1<<PB4)|(1<<PB3)|(1<<PB2)|(1<<PB1)|(1<<PB0);
(All B port pull up)
And input flowchart pull-up into the port bits.
by STibor
Fri Aug 01, 2014 3:58 pm
Jump to forum
Jump to topic

Re: Enabling internal pull-ups on AVR's

This is how I did it.
by STibor
Sun Sep 14, 2014 7:58 am
Jump to forum
Jump to topic

Re: HOW TO EDIT MY ADC MADRO CODE?

Hi, FlowcodeV5 close the program. Find the PIC_CAL_ADC.c file. C: \ Program Files \ Flowcode \ v5 \ CAL \ PIC Look for the following line in the file: // ADC Type 1 Supported Devices // 16F818, 16F819, 16F873A, 16F874A, 16F876A, 16F877A, original: #ifdef MX_ADC_TYPE_1 void FC_CAL_Enable_ADC (MX_UINT...
by STibor
Tue Feb 28, 2012 6:25 pm
Jump to forum
Jump to topic

Re: Flowcode V5 examples

Hi!
Thank you!
Here are the 4-byte program.
Tested with Pic18F252.
Data_Out3 Data_Out4 and variable type integer, byte variable error is the result.
by STibor
Tue Sep 16, 2014 5:51 am
Jump to forum
Jump to topic

Re: FlowCode V5 for PIC - internal oscillator issue

Hi,
Not include the controller "osccon" register.
Internal 4MHz clock by default.
PCON register sets the bit OSCF (1bit) or 4MHz (0bit) from 48kHz.
by STibor
Tue Sep 16, 2014 6:13 pm
Jump to forum
Jump to topic

Re: FlowCode V5 for PIC - internal oscillator issue

Hello,
Not be used to delete the C code macro or write c code before // characters.
// Post code is not interpreted by the compiler.
by STibor
Mon Dec 01, 2014 8:55 pm
Jump to forum
Jump to topic

Re: ARM Debate

Hello! Interesting topic. Development will be ARM controller? ST 32F429IDISCOVERY cheap and fast. Will Cortex M4 Flowcode? I'm buying it. http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/PF259090 http://www.newark.com/stmicroelectronics/stm32f429i-disco/dev-board-stm32f429i-mcu/dp/06X3667
by STibor
Thu Jun 04, 2015 10:46 am
Jump to forum
Jump to topic

Re: 8 Digit Dot Matrix Module component for MAX7219

Hi! I created a demo program. Character scroll is not included. http://www.matrixtsl.com/mmforums/viewtopic.php?f=56&t=14330&p=56894&hilit=max7219#p56894 http://www.matrixtsl.com/mmforums/viewtopic.php?f=26&t=14165&p=56912&hilit=max7219#p57048
by STibor
Sun Aug 30, 2015 8:21 am
Jump to forum
Jump to topic

Manchester encoder decoder component

Hi!
I would like a Manchester encoder decoder component.
Coding: Variable Input Manchester code output.
Decoder: Decoded Manchester variable output, fault output.
Thanks in advance!
by STibor
Tue Oct 27, 2015 6:03 pm
Jump to forum
Jump to topic

Re: Mifare RC522 RFID

Hello!
Thanks for the quick help!
Tomorrow I look at hardware.
by STibor
Thu Oct 29, 2015 6:29 am
Jump to forum
Jump to topic

Re: Mifare RC522 RFID

Hello!

The card recognition okay.
The ID readout is not working.
What is bad?
by STibor
Thu Dec 31, 2015 7:40 am
Jump to forum
Jump to topic

Re: GLCD's, a mistery treasure!!

Hello! The SSD1289 graphic LCD requires a 3.3V logic supply. Arduino Mega 2560 logic voltage to 5V. Do you use 5V <-> 3.3V voltage converter shield? Etc. http://www.hobbielektronika.hu/forum/getfile.php?id=233929 The linked Arduino shields port assignment is random, Flowcode data ports (data port lo...
by STibor
Thu Feb 04, 2016 6:48 am
Jump to forum
Jump to topic

Re: Modify single 7 Segment LED

Hello!

Without component.
by STibor
Thu Feb 04, 2016 5:52 pm
Jump to forum
Jump to topic

Re: Modify single 7 Segment LED

This example is simpler than the previous one.
An example includes two variable arrays. Common anode or common cathode display.
Previous examples can be problematic (stack owerflow) interruption.
by STibor
Wed Feb 10, 2016 3:08 pm
Jump to forum
Jump to topic

Re: Mifare RC522 RFID

Hello!
Thank you for your component!
I have RFID hardware, tested in the evening.
by STibor
Wed Feb 10, 2016 8:41 pm
Jump to forum
Jump to topic

Re: Mifare RC522 RFID

Hello! Thank you! I tested the module. The results are very good, the program works. There are so many mistakes that: After init of the 1-4 information is incorrect. For example: RFID Init okay 7,0,0,0,0 bad value 1,0,0,0,0 9,212,9,3,77 good value 9,212,9,3,77 9,212,9,3,77 9,212,9,3,77 9,212,9,3,77 ...
by STibor
Sun Feb 21, 2016 10:12 am
Jump to forum
Jump to topic

Re: Mifare RC522 RFID

Hello!
I checked the SPI data line logic analyzer.
The initialization did not match the Arduino example applications.
Slightly modified the program.
The maximum transmission distance of 5 cm. :D

I think I was good.
by STibor
Fri Feb 19, 2016 7:17 pm
Jump to forum
Jump to topic

Re: PIC18F25K80 timer1 problem

Hello medelec35!

Also, check with the following types:
PIC18F25K80
PIC18LF25K80
PIC18F26K80
PIC18LF26K80
PIC18F45K80
PIC18LF45K80
PIC18F46K80
PIC18LF46K80
PIC18F65K80
PIC18LF65K80
PIC18F66K80
PIC18LF66K80
by STibor
Fri Mar 18, 2016 6:54 pm
Jump to forum
Jump to topic

Re: Mifare RC522 RFID

Hello! @ Ben thanks for your program! How prepared Dynamic SPI layer? If you have time you can create a video about this? Preparation solved the SPI clock divider layer? @ JGU (you must know) RC522 3,3Volt the power supply. The PIC microcontroller with the following outputs (if 5Volt power line work...
by STibor
Tue Jun 07, 2016 8:28 pm
Jump to forum
Jump to topic

Re: max7219/SPI troubles.

Hi! initialize Chip_Select := 1; SPI_Init; Chip_Select := 0; SPI_Send_Char=0x0b; SPI_Send_Char=0x07; Chip_Select := 1; Chip_Select := 0; SPI_Send_Char=0x09; SPI_Send_Char=0xff; Chip_Select := 1; Chip_Select := 0; SPI_Send_Char=0x0c; SPI_Send_Char=0x01; Chip_Select := 1; Chip_Select := 0; SPI_Send_Ch...
by STibor
Sun Jun 12, 2016 12:02 pm
Jump to forum
Jump to topic

Re: PIC18F14K22 RS232 interrupt problem

Hello! I think I found the problem. C: \ Program Files \ Flowcode 6 \ FCD \ PIC \ 18F14K22.fcdx file. Original: <spi > <miso port='1' pin='0' /> <mosi port='2' pin='7' /> <clk port='1' pin='1' /> <ss port='0' pin='5' /> </spi> Modified: <spi > <miso port='1' pin='4' /> <mosi port='2' pin='7' /> <clk...
by STibor
Mon Jun 13, 2016 4:05 am
Jump to forum
Jump to topic

Re: PIC18F14K22 RS232 interrupt problem

And PIC18F14K50 FCD file.
by STibor
Fri Jun 10, 2016 4:15 pm
Jump to forum
Jump to topic

Re: max7219/SPI troubles.

Stibor, nice project - https://www.youtube.com/watch?v=L_2jvbifOwk How is this done? Arduino? Hello! Thanks! No Arduino, with Pic18F6622 made. I use Arduino development, final PIC microcontroller-based circuit. Controller pcb: https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xta1/v/t1.0-9/1526595_...
by STibor
Wed Jun 22, 2016 7:55 pm
Jump to forum
Jump to topic

Re: Mifare RC522 RFID

Hi Ben! Upload source components? If you look at the components of my work I read faster initialization than what you have uploaded. (I do not know how much the standard timing, a hardware I tested the fastest operation) Unfortunately I did not manage to implement SPI dynamic configuration settings....