Search found 7 matches

Return

by Benj
Tue Sep 18, 2012 2:56 pm
Jump to forum
Jump to topic

Re: Baud rate change in the software

Hello, How do I turn now to the PIC to 115000 baud? You call the function I suggested above. UART_Update_Baud(6); //Update UART baud to 57600bps If you don't have this function in your RS232 component then please ensure you are using the latest version of Flowcode which is v5.4 for PIC. baudchange.j...
by Benj
Tue Sep 18, 2012 2:21 pm
Jump to forum
Jump to topic

Re: Baud rate change in the software

Hello Uwe, Aha I see now your simply using the RS232 component to control the display. What about trying the gLCD component instead and setting the properties to the EB076 type display. This should give you all the display functions plus touchscreen and should also perform the speed increase for you...
by Benj
Wed Oct 10, 2012 10:20 am
Jump to forum
Jump to topic

Re: PIC18F46K80 ADC Config Adcon1 in C-Code

Hello, I think I have found the ADC related bug that was causing the issue. Please copy the files below into your Flowcode install folder before starting Flowcode and hopefully the ADC should work correctly for you now. Extract and copy these files into "v5/FCD/" 18FxxK80.zip And copy this...
by Jojo1981
Thu Oct 11, 2012 7:15 pm
Jump to forum
Jump to topic

Re: ADC PIC18F46K80 keine Funktion

Hallo Uwe, den Fehler macht aber nur der PIC selber, die Simulation in FlowCode ist fehlerfrei, oder? Ich hatte bei einem PIC18F25K22 auch das gleiche Problem mit überschreibenden Registern. Prüfe doch mal ob das XINST Bit an ist oder nicht. REGISTER 28-1: CONFIG1L: CONFIGURATION REGISTER 1 LOW (BYT...
by Jojo1981
Fri Oct 12, 2012 7:02 am
Jump to forum
Jump to topic

Re: ADC PIC18F46K80 keine Funktion

Hallo Uwe, du must Bit6 (XINST) im Config1L auf 0 setzten um die erweiterte Instruktionen von den neuen 18F- Pics auszuschalten. Flowcode und BoostC kann es nicht und dadurch kommen falsche Sprungbefehle ab der RAM- Adresse 0x05F. Schau dir doch mal im c- File an wo deine sich ändernden Variablen ab...
by Benj
Fri Oct 12, 2012 12:17 pm
Jump to forum
Jump to topic

Re: Simulation (RS232 component)

Hello Uwe,

In the EXT properties for the RS232(0) there is a setting called show simulation. Please ensure that this is ticked and the RS232 window should then remain on the panel for simulation.