Search found 11 matches

Return

by JohnCrow
Sat Aug 16, 2014 11:02 am
Jump to forum
Jump to topic

4D Systems Display Tutorial

4D Systems Intelligent (Visi) Display Tutorial 1.0 Introduction: 4D Systems produce a range of “Intelligent” Touch Screen Displays. This tutorial will focus on the uLCD-32PTU model which uses the Picasso Processor. 4D Systems produce a range of documentation and application notes for the hardware, ...
by Docara
Tue Jun 06, 2017 5:24 pm
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

Hi Quazar, I cant answer your question directly but perhaps I can offer a different direction/thought path for you to accomplish your desired result. I am looking at 4D systems at the moment, the intelligent displays seem to tick many boxes and if you trawl through the application notes http://www.4...
by Benj
Tue Jun 13, 2017 4:51 pm
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

Right I've made a start and hopefully the following will now work as expected. Everything is significantly different now so it's not surprising that it wasn't working before. Please note you will need the latest version of Flowcode 7 to use this component. I've hopefully fixed the following macros s...
by Benj
Tue Jun 13, 2017 4:20 pm
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

Hello, It's likely the 4D Goldelox protocol has changed slightly over the years and therefore broken the Flowcode component, this certainly happened with the Picaso displays though this should be fixed now. If you have working macros using the UART component then it should be fairly easy to wrap the...
by Benj
Thu Jun 15, 2017 3:11 pm
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

Thanks for letting me know. This should hopefully be fixed now.

gLCD_EB075_4D.fcpx
by Benj
Thu Jun 15, 2017 1:05 pm
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

Thanks for letting me know.

I have had another pass through the component and hopefully have now fixed the text offset issue so that the display and the simulation will match up.

Hopefully everything should now work as expected but let me know how you get on.

gLCD_EB075_4D.fcpx
by Benj
Fri Jun 16, 2017 11:06 am
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

This component will add simulation for the new font sizes 4-31.

Base_GLCD.fcpx
by Benj
Fri Jun 16, 2017 10:40 am
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

Hi Quazar, Is there a problem with the filling of the ellipse? I have now fixed the problem where font sizes other than 0 did not simulate. though sizes over the standard size 3 won't currently simulate. I've added some more font sizes for the downloadable version for you and these might then eventu...
by Zane
Mon Jun 19, 2017 2:18 am
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

Hi, If you go to the 4D web site and select the product you are looking at, there is a data sheet that has the serial command set for the given display. If you look at this post there is a component that i have created so you can see how it is constructed. There are no simulation macros included in ...
by Benj
Tue Jun 27, 2017 9:16 am
Jump to forum
Jump to topic

Re: 4Dsystem 1.7' uOLED-160G2 OLED communication issue

Hello,

Yes no problem with that, here you go.

gLCD_STM32F469NI.fcpx
by Benj
Tue Apr 19, 2011 4:11 pm
Jump to forum
Jump to topic

Re: MX009 - PID Control

Hello, Right Sean managed to find out what is causing the second import problem :mrgreen: Basically what it was is that the port on the 16bit PIC device is essentially port 6 which is unrecognised by the chip I used when doing the AVR import. The files have been fixed and here are the AVR imported v...