Search found 25 matches

by Azii
Fri May 29, 2009 9:36 am
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Re: Keypad password Questions

Hey Benj,

Yes i've manage program it so the " * " works.
but instead of the Yes: String Manip: String_Var = "". i've just put LCD macro with clear and a 50ms delay in front of it.

Kind Regards

Steve
by Azii
Thu May 28, 2009 7:23 pm
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Re: Keypad password Questions

Hi there, i have a question regarding the * button on they keypad, could u maybe program it if i for example type 456 but i want to change it to 457, that if i click on the * it resets the whole LCD, because now if i want to reset it, I need to click the Reset Switch on the PICmicro controller hardw...
by Azii
Tue May 26, 2009 7:49 pm
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Re: Keypad password Questions

Hello,

OkΓ© thanks alot for all the answers on my questions Benj, they really helped me alot further.

Thanks!
by Azii
Mon May 25, 2009 3:17 pm
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Re: Keypad password Questions

I think the LCD cursor is just for the x,y position of the number you've typed and the correct code next to it. the LCD printstring is used so u can see what u have typed on the LCD the Printspace is just a macro used to have a space between what you have typed and the correct number of the input st...
by Azii
Fri May 22, 2009 4:22 pm
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Re: Keypad password Questions

Hey,

OkΓ© i'll try to complete it, i'm starting to see u as a flowcode god, u know an answer on every question i ask :P
about the chart again,
Could u maybe give a bit information about these 4 components. that's the only thing i don't understand yet from the MAIN chart.

Thank joe again

Steve
by Azii
Fri May 22, 2009 3:03 pm
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Re: Keypad password Questions

Hello, thanks Benj for the information it really helped me alot so far! I was wondering on how to program the following : its like a 'silent alarm'. if u adjust the password at the component 'Compare input string and Password' . and u change it for example to 456, is it possible if i typ 654 ( so th...
by Azii
Fri May 22, 2009 11:38 am
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Re: Keypad password Questions

Hey, Yes thanks i'm learning alot thanks to you now :) i still have a few questions though. u mentioned about the INIT first char, but what does it actually do? u said ''This is simply ensuring that variables get reset to 0 or strings get set to null. '', but what is the actuall meaning of this? And...
by Azii
Fri May 22, 2009 8:29 am
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Re: Keypad password Questions

Hey Benj, Thanks already for the info u've giving about the previous post, i'm starting to understand the chart alot better now. I still have a few questions. i've said this about the decision : * Then we come to the Decision, this will control the both Relais used. if its correct it will active a c...
by Azii
Tue May 19, 2009 7:39 pm
Forum: E-blocks
Topic: Keypad password Questions
Replies: 14
Views: 10953

Keypad password Questions

Hi there, i was wondering if someone could explain me some of the things which are used in the following .fcf attached file. I'll post what i t hink the most components are for, as flowcode newbie :P : *The 50ms means for the LCD to 'warm up' *The Component Macro below is used for the LCD to start u...
by Azii
Mon May 18, 2009 6:36 pm
Forum: E-blocks
Topic: LCD Connections... Help!
Replies: 4
Views: 4476

Re: LCD Connections... Help!

Hi there, Have you ever had something on the LCD before or is this your first time that you want to get something on the screen? Important thing to make sure they are correct is that the adapter on your PICmicro is External 14V ( You can adjust the adapter on the backside ), and you should have a wi...
by Azii
Thu May 14, 2009 8:30 pm
Forum: Flowcode V2 & V3
Topic: Let Us Know What You Are Doing With Flowcode
Replies: 42
Views: 86817

Re: Let Us Know What You Are Doing With Flowcode

i use it for school, so far the 2nd one who uses flowcode in school for my GIP ( Integrated Test )
by Azii
Thu May 14, 2009 8:28 pm
Forum: Flowcode V2 & V3
Topic: Keypad passw0
Replies: 0
Views: 2259

Keypad passw0

Heeyy, First of all i want to thank Benj for this file because it really helped me alot! i have a question about the .fcf ( see att ) made by Benj, and i was wondering on some way if: If you adjust the code at the component macro like this that flowcode can sumhow remember the code inserted other wa...
by Azii
Fri Mar 27, 2009 2:41 pm
Forum: E-blocks
Topic: Keypad EB014
Replies: 5
Views: 4816

Re: Keypad EB014

Hello, I tested the keypad out today and it worked great! i've used the relais board as output and the 2 relais work as it should be. At 1 relais there is an alarm system to attached, and the other relais has a selfmade small door to it attached and if i type the code correct it works so i'm very ha...
by Azii
Thu Mar 26, 2009 4:24 pm
Forum: Flowcode V2 & V3
Topic: Programming Keypad
Replies: 6
Views: 4001

Re: Programming Keypad

Hello,

I've tested the program out today at school but the problem is that the port from the keypad is not connected. could you maybe say which things i all need to edit to place the keypad for example on port D ?

Thanks
by Azii
Wed Mar 25, 2009 2:17 pm
Forum: Flowcode V2 & V3
Topic: Programming Keypad
Replies: 6
Views: 4001

Re: Programming Keypad

Hey,

Ok no problem i maybe thought it would be easier for you but i'll post any questions on the forum again :)

Thanks :)
Steve
by Azii
Tue Mar 24, 2009 7:05 pm
Forum: Flowcode V2 & V3
Topic: Programming Keypad
Replies: 6
Views: 4001

Re: Programming Keypad

Hello, Thanks alot, really thanks, i'm gonna test it out this Friday because all of the hardware is in school and i'm not allowed to bring it home, i'll give a rapport if it works but like the simulation so far it works very great so far! I'll try to get the flowcode chart known, so that i understan...
by Azii
Tue Mar 24, 2009 1:02 pm
Forum: Flowcode V2 & V3
Topic: Programming Keypad
Replies: 6
Views: 4001

Programming Keypad

Hello, i'm using flowcode for my GIP but my time is getting the problem so i would kindly ask the following. I was wondering if someone could build me a flowchart which involves the following criteria : - Keypad that remembers the code that i put in ( for example : 1 2 3 ) and if that code is typed ...
by Azii
Thu Mar 19, 2009 4:29 pm
Forum: E-blocks
Topic: Keypad EB014
Replies: 5
Views: 4816

Re: Keypad EB014

Hello,

Ok thanks alot i will definitly look at this course and if i have any questions is it ok i post them here?

thanks in advance
by Azii
Wed Mar 18, 2009 1:51 pm
Forum: E-blocks
Topic: Keypad EB014
Replies: 5
Views: 4816

Re: Keypad EB014

Hi,

Yes i have tried to find out how the entire flowchart works, but im still a flowcode rookie, so i don't really understand all the things what are used, is there something which is abit easier to get started with, or maybe some kind of manual on how to get that chart known?

Kind regards
by Azii
Wed Mar 18, 2009 9:14 am
Forum: E-blocks
Topic: Keypad EB014
Replies: 5
Views: 4816

Keypad EB014

Hi there, i like to thank everyone who helped me getting working with the E-block relay, it all worked ok on my GIP ( integrated test ) presenentation and i had positive comments on this, i've managed to get something else working through the e block relais what was working as a switch. Now my follo...
by Azii
Sun Mar 15, 2009 11:02 am
Forum: Flowcode V2 & V3
Topic: Programming Relay Board ( EB038 ) and the Keypad( EB014 )
Replies: 0
Views: 2065

Programming Relay Board ( EB038 ) and the Keypad( EB014 )

Hi, i was wondering if anyone could help me programming the relay board and the keypad at the same time. i manage to switch the relay board on and off. but for example if i want to make an excercise on using them both, for example if i typ 1234 on the keypard the relay board should switch on for lik...
by Azii
Fri Mar 06, 2009 1:18 pm
Forum: E-blocks
Topic: Testing the Relais board
Replies: 6
Views: 5475

Re: Testing the Relais board

Hey! Yes it works i've connected the relay board on the +14V from the EB006 and i hear the Relay ticking when the led jumps on, thanks alot for that! Now it's up to programming in flowcode and sending it to the specific item i need to complete my integrated test. I'll post if i have any problems inc...
by Azii
Fri Mar 06, 2009 8:42 am
Forum: E-blocks
Topic: Testing the Relais board
Replies: 6
Views: 5475

Re: Testing the Relais board

Hi there, Thanks for the help so far, i really appreciate it. I've connected a wire from the EB006 controller ( +14 ) to the +V from the relay board. i've used a program that that allows running on and off from the LEDs of the Relay board but i don't hear them clicking on and off, only the LEDs are ...
by Azii
Tue Mar 03, 2009 12:55 pm
Forum: E-blocks
Topic: Testing the Relais board
Replies: 6
Views: 5475

Re: Testing the Relais board

Hello, Yes i have the EB006 board, i'm working with flowcode/e-blocks for school but the teachers aren't so far with e blocks aswell. i've tried to solve it with a teacher. i've tried to test already with that test file but nothing worked like it should be, and i have set it in the XTAL position and...
by Azii
Tue Mar 03, 2009 12:19 pm
Forum: E-blocks
Topic: Testing the Relais board
Replies: 6
Views: 5475

Testing the Relais board

Hi everyone, E-Block EB038 Relais Board. I'm having problems with testing the Relais board, i have everything i need for it to test it such as the main board, all the cables and so on. While testing it, but at the test text it says the leds will illuminate in turn and the corresponding relays should...