Matrix user forums

It seems to work ok now. GREAT!
Thank you very much for your support.

PS: I'm really starting to like Flowcode

Hello... Done some more tests on various combinations of ADC-channels and still the conclusion is the same. I can use any single channel without a problem. I can use up to 2 channels without a problem as long as they are not a combination of the first 3 channels (O,1 or2). Whenever I try to use 3 ch...

Gentlemen, I've been running some more basic ADC tests (see previous attachement) and found the following: 1) Whenever I use a combination of ADC channels 0 & 1 or 1 & 2 both PWM outputs respond in unisun to the highest ADC channel #. 2) If I use any other combination of channels the ADC works okΓ© ...

Hi, I just did a small test (see attached) with the EB031 as target, just to be sure, and the result is the same. I have 2 LED's on the PWM outputs and they both respond to either of the ADC inputs. I don't believe it's a hardware failure since the board-test program works fine. Please advise. Kind ...

Hello I have found a similar problem with the ARM processor. As soon as I try to use more than 1 ADC-channel the simulation looks good but after compiling and downloading either all channels seem to react to one another or the second channel takes over from the first (depending on the programming or...