Matrix user forums

Dear Sir/Madam,
I have not found an information on Complementary Waveform Generator (CWG) nor found the chip with that function in flowcode 5.
can any one provide information or tutorial on dead time delay thanks in advance.
Roger

I thought I would put together a basic tutorial on Look-up tables. I have Benj to thanks as I first read about LUT here: http://www.matrixmultimedia.com/mmforums/viewtopic.php?f=26&t=3543&#p5509 I thought I would try and write a tutorial form a different perspective. Thanks werner for spotting my t...

Di Guys ,
I did a few different ways , I used the FC 5 to compile to C and Hex file then I use the pppv3 3.9.12.26 to down load it to the chip and it works this way .
I think there is problem with FC5 communicates with the pppv3 assembly soft ware
please help to solve the problem
thanks

Hi There is nothing wrong in the code. It seems an issue with V3 board or PPPv3 software. Can you please post you compiler and programmer configuration? ok please let me know where I can locate it , even in FC 4 i can see program fail in the screen but the led flash in the board and it programmed O...

Enamul wrote:Are you using FCv5.4 or 5.5?

I purchased the latest version it should be 5.5
thanks

Hi Guys, I am a bit frustrated i made a simple program in flow code 4 and it works in flowcode 4 when i open it in flowcode 5 it doesnt function and saids program fail (config1) i am using picmicro development board version 3 hp-488-00-3 please help i have attached the file for your revision any inf...

Hi Benj,
i also made a simple program to turn on a led on a port it still fail to program and complie
i also check the folder C:\Program Files (x86)\Flowcode\v5\Tools\boostc\config
and there is not 10F222 tdf listed do i need and how to get that in ?
thanks
Roger

Hi Benj, I have upgraded to V5 and compiled the same program and it has errors as below i am using pic development board Version 3 it simulated ok but fail to program , it that mean that each time i program a chip i have to go to the c code and make change myself? i have attached the program it self...

hi medelec ,
i just try to compile it to the chip and it shows an error on the hex file is our side the chips memory range, then i made a new simple program to turn on a port but still saying that can u tell me where can it possibly went wrong thanks

I found the RB3 interrupt in 18f25k80 does not work the other interrupts RB0 to RB2 is ok and simulate propertly but not the Int from RB3 please find attached simple test code for your reference Hopefully this is a simulation only problem and it should have been fixed for v5 where we overhauled all...

this seem comply ok let me see if it can be programmed.
i can see what you have change Thanks much for your help but how come it doesn't work the way I set in the first place?
it simulate ok tho

[quote="poweronhand" Can you please let me know if there is a bug on chip 10F222 I can simulate in the flowcode 4 but can't comply to HEX Hi poweronhand, Have you read this: http://www.matrixmultimedia.com/mmforums/viewtopic.php?f=46&t=11717&p=43704&#p43704 It may help? Martin[/quote] Thanks Martin...

Hi Benj
I restarted the computer both issue are the same is there any thing i can look at ? thanks
Roger

I found the RB3 interrupt in 18f25k80 does not work the other interrupts RB0 to RB2 is ok and simulate propertly but not the Int from RB3 please find attached simple test code for your reference Hopefully this is a simulation only problem and it should have been fixed for v5 where we overhauled all...

Dear Sir /Madam Can you please let me know if there is a bug on chip 10F222 I can simulate in the flowcode 4 but can't comply to HEX I have attached the program please check thanks in advance Roger the below is the error : Launching the compiler... c:\program files (x86)\matrix multimedia\flowcode ...

Dear Sir /Madam Can you please let me know if there is a bug on chip 10F222 I can simulate in the flowcode 4 but can't comply to HEX I have attached the program please check thanks in advance Roger the below is the error : Launching the compiler... c:\program files (x86)\matrix multimedia\flowcode v...

Dear Sir / Madam I found the RB3 interrupt in 18f25k80 does not work the other interrupts RB0 to RB2 is ok and simulate propertly but not the Int from RB3 please find attached simple test code for your reference thanks in advance Roger testing on : Flowcode Professional Version Flowcode v4.5.18.74 ...

it is on
Flowcode
Professional Version
Flowcode v4.5.18.74
thanks

Dear Sir / Madam
I found the RB3 interrupt in 18f25k80 does not work the other interrupts RB0 to RB2 is ok and simulate propertly but not the Int from RB3
please find attached simple test code for your reference
thanks in advance
Roger

thanks for your reply please advice if i can access to the flash memory with out a programmer i mean if i want record some data in the chip's rom?
also where can i set the pwm output on port b bit 7?
thanks

Hi there can any one tell me if there is any way to change the ADC conversion time? and what is the acquisition time calculated? it is default 40 cycles , i am using a 16f716 internale clock with RC OSC and i used to test the conversion complete flag "BTFSS "before i record the converted value to a ...