Hello
thank you for the help. After PC restart, two registration and some Flowcode V6 starts was the registration successful.
Search found 108 matches
- Mon Mar 31, 2014 11:44 am
- Forum: Flowcode V6
- Topic: mistake upgrade Flowcode 6.0.7.0
- Replies: 7
- Views: 5696
- Mon Mar 31, 2014 11:28 am
- Forum: Flowcode V6
- Topic: mistake upgrade Flowcode 6.0.7.0
- Replies: 7
- Views: 5696
Re: mistake upgrade Flowcode 6.0.7.0
Hello thank you for the message. Regrettably has the manual registration not correctly worked. First I get the message the registration was successful. Then after few minutes I get the message the registration app can't start. You can see this in the appendix Regestrierungsmeldung.JPG Fehlermeldung ...
- Sun Mar 30, 2014 10:50 pm
- Forum: Flowcode V6
- Topic: mistake upgrade Flowcode 6.0.7.0
- Replies: 7
- Views: 5696
Re: mistake upgrade Flowcode 6.0.7.0
Hello, thank you for the messages. The activate dialog said my Flowcode 6.0 is activated. If I insert my Username and passwort, I get the error message "Username not found". The employee from Matrix Multimedia wrote in the e-mail from 14.10.2013 that this proplem is resolved. As you see the statemen...
- Sun Mar 30, 2014 1:47 pm
- Forum: Flowcode V6
- Topic: mistake upgrade Flowcode 6.0.7.0
- Replies: 7
- Views: 5696
mistake upgrade Flowcode 6.0.7.0
Hello, i have upgrade Flowcode 6.0.7.0 installed. Then I got the message, that I hadn't a license for this product. Please can you correct the mistake. I would be obliged if do it without delay correct. I am still waiting on your answer to my complaint from the 2014.15.03. I'm very angry and can't a...
- Sat Mar 15, 2014 7:35 pm
- Forum: Deutsch Support-Forum
- Topic: Reklamation Flowcode6 die 2.
- Replies: 0
- Views: 7994
Reklamation Flowcode6 die 2.
Hallo, Auf meine Reklamation vom 03.01.2014 antwortete Herr Benj meine Fehler würden bald behoben weil die Fehler an exponierter stelle stehen. Nach Ihrer Antwort habe ich von Matrix Multimedia nichts mehr gehört weder eine neue Version noch eine Antwort wie ich die offensichtlichen Fehler umgehen o...
- Fri Jan 03, 2014 8:04 pm
- Forum: Deutsch Support-Forum
- Topic: Reklamation Flowcode6
- Replies: 2
- Views: 9101
Reklamation Flowcode6
Hallo, nachdem ich von Ihnen seit 18.12.2013 auf meinen Hinweis, dass der USB in Flowcode6 für 24FJ64GB002 einen schwerwiegenden Fehler hat keine Antwort bekommen habe, wende ich mich an das Deutsche Support-Forum. Weil viele Komponenten auch mit unterschiedlichen PICs schwerwiegende Fehler generier...
- Wed Dec 18, 2013 7:31 pm
- Forum: Flowcode V6
- Topic: Help for USB
- Replies: 11
- Views: 7595
Re: Help for USB
Hello I have insert a delay. The Hyper Terminal don't receive a message. Then I import the Flowcode5 programm in the Flowcode6. The result is the Hyper Terminal don't receive a message. From my view it cannot develop meaningfully the USB application in flowcode5. Therefor Flowcode6 was too expensive...
- Sat Dec 14, 2013 5:10 pm
- Forum: Flowcode V6
- Topic: Help for USB
- Replies: 11
- Views: 7595
Re: Help for USB
Hello,
I believe Flowcode6 has a bug in the USB Serial, because I transfered the config settings in the Flowcode5 and with this the code run the programm correct.
I believe Flowcode6 has a bug in the USB Serial, because I transfered the config settings in the Flowcode5 and with this the code run the programm correct.
- Sat Dec 07, 2013 1:09 pm
- Forum: Flowcode V6
- Topic: Help for USB
- Replies: 11
- Views: 7595
Re: Help for USB
Hello, I work with internal oscillator and the PLL mode. The Takt of the LED is 1Hz, this worked correctly. If you start the "Project Option" the Watchdog Timer and other flag differ from the last modification without modifiation in the current session. I checked the the configuration config1 to con...
- Fri Dec 06, 2013 12:18 am
- Forum: Flowcode V6
- Topic: Help for USB
- Replies: 11
- Views: 7595
Re: Help for USB
Hallo,
Flowcode : 6.0.4.0
MCU : 24FJ64GB002
Tact : 32MHz
Communication: USB serial
Configuration Einstellungen:
Config4 = 0xff18
Config3 = 0xf4ff
Config2 = 0x89af
Config1 = 0x3f7f
Flowcode : 6.0.4.0
MCU : 24FJ64GB002
Tact : 32MHz
Communication: USB serial
Configuration Einstellungen:
Config4 = 0xff18
Config3 = 0xf4ff
Config2 = 0x89af
Config1 = 0x3f7f
- Tue Dec 03, 2013 12:05 am
- Forum: Flowcode V6
- Topic: Help for USB
- Replies: 11
- Views: 7595
Re: Help for USB
Hello,
I checked my config1 and the watchdog timer is disable. I start the programm and the return of the step "USB_Serial1 Initialise" is not 255. In the Hyper Terminal I can't see the sendstring of USB. With other words the USB send nothing. The USB- Treiber ist the USB-Treiber of Flowcode5
I checked my config1 and the watchdog timer is disable. I start the programm and the return of the step "USB_Serial1 Initialise" is not 255. In the Hyper Terminal I can't see the sendstring of USB. With other words the USB send nothing. The USB- Treiber ist the USB-Treiber of Flowcode5
- Fri Nov 29, 2013 11:27 pm
- Forum: Flowcode V6
- Topic: Help for USB
- Replies: 11
- Views: 7595
Re: Help for USB
Hello,
if I compile the programm with Flowcode 5 then works it correct. The same programm compiled with Flowcode 6 works not correct.
if I compile the programm with Flowcode 5 then works it correct. The same programm compiled with Flowcode 6 works not correct.
- Thu Nov 28, 2013 10:23 pm
- Forum: Flowcode V6
- Topic: Help for USB
- Replies: 11
- Views: 7595
Help for USB
Hallo, Flowcode : 6.0.4.0 MCU : 24FJ64GB002 Tact : 32MHz Communication: USB serial - I wrote a small programm. You can see that in the attachment. - I have the new USB-Treiber installed - I open the "HyperTerminal" and can't open the virtual com Can you urgently help me Error_4.JPG Error_4.JPG
- Sun Nov 24, 2013 10:45 pm
- Forum: Flowcode V6
- Topic: error in the RC5 componente
- Replies: 1
- Views: 2190
error in the RC5 componente
Hallo,
Flowcode : 6.0.3
MCU : 24FJ64GB002
Tact : 32MHz
Communication: USB serial
I wrote a small programm. You can see that in the attachment.
If I compile the program I get the error these You can see in the attachment.
Flowcode : 6.0.3
MCU : 24FJ64GB002
Tact : 32MHz
Communication: USB serial
I wrote a small programm. You can see that in the attachment.
If I compile the program I get the error these You can see in the attachment.
- Sun Nov 24, 2013 7:25 pm
- Forum: Flowcode V6
- Topic: errors in the USB serial
- Replies: 1
- Views: 2030
errors in the USB serial
Hallo,
Flowcode : 6.0.3
MCU : 24FJ64GB002
Tact : 32MHz
Communication: USB serial
I wrote a small programm. You can see that in the attachment.
If I compile the program I get the error these You can see in the attachment.
Flowcode : 6.0.3
MCU : 24FJ64GB002
Tact : 32MHz
Communication: USB serial
I wrote a small programm. You can see that in the attachment.
If I compile the program I get the error these You can see in the attachment.
- Sat Nov 23, 2013 12:24 am
- Forum: Flowcode V6
- Topic: Bug in the Flowcode 6.0.3
- Replies: 3
- Views: 3313
Re: Bug in the Flowcode 6.0.3 that restricted mywork
Hello,
I have a issue reported ago 15 days, that extrem restricted my work. I works often with element C-Code that lost the text after new start. Can you a way my say how I can bypass the problem.
HjH
I have a issue reported ago 15 days, that extrem restricted my work. I works often with element C-Code that lost the text after new start. Can you a way my say how I can bypass the problem.
HjH
- Thu Nov 07, 2013 11:08 pm
- Forum: Flowcode V6
- Topic: Bug in the Flowcode 6.0.3
- Replies: 3
- Views: 3313
Bug in the Flowcode 6.0.3
Hallo, Flowcode : 6.0.3 MCU : 24F16KA102 Tact : 8MHz I wrote a small programm. You can see that in the attachment. If I save and close the programm and Flowcode 6.0.3 and I reopen the Programm and Flowcode 6.0.3 the elements C-Code is emty and the Output is B0 instead of B8. HjH Test_V2.fcfx Test_V2...
- Mon Nov 04, 2013 10:54 pm
- Forum: Flowcode V6
- Topic: Config2 exchange config3
- Replies: 1
- Views: 2096
Config2 exchange config3
Hello, Flowcode : 6.0.3 MCU : 24FJ64GB002 Tact : 32MHz in the configuration word config2 is a bug. Config2 is exchange with config3 Present state //Configuration Start _CONFIG1(65299); _CONFIG2(64767); // false _CONFIG3(2454); // false _CONFIG4(30583); //Configuration End correct state //Configurati...
- Sun Nov 03, 2013 12:24 am
- Forum: Flowcode V6
- Topic: bug with RS232 in 24FJ64GB002
- Replies: 1
- Views: 2635
bug with RS232 in 24FJ64GB002
Hallo, Flowcode : 6.0.3 MCU : 24FJ64GB002 Tact : 32MHz Baudrate : 115200 in the porperties the RS232 panel is a bug. (see attached file) The TX and the RX phrase can't overwrite. This ends with following error: C:\PR930E~1\24FJ64~1>pic30-gcc -c -mcpu="24FJ64GB002" -funsigned-char -fno-short-double -...
- Mon Oct 28, 2013 11:30 pm
- Forum: Flowcode V6
- Topic: new componente create
- Replies: 1
- Views: 2355
new componente create
Hello
How can I fit a new componente create in Flowcode 6.
Can anybody help me
HjH
How can I fit a new componente create in Flowcode 6.
Can anybody help me
HjH
- Sun Oct 27, 2013 7:00 pm
- Forum: Flowcode V6
- Topic: Bug in RS232 Makro
- Replies: 1
- Views: 2151
Bug in RS232 Makro
Hello
In the " FCD_02e3_RS232__Initialise();" is a bug.
All settings in the RS232 properties are not effectively.
You can the Makro "RS232 Initialise" replace with my Makro "Init_RS232_33FJ128GP802"
Microcontroller: 33FJ128GP802
HjH
In the " FCD_02e3_RS232__Initialise();" is a bug.
All settings in the RS232 properties are not effectively.
You can the Makro "RS232 Initialise" replace with my Makro "Init_RS232_33FJ128GP802"
Microcontroller: 33FJ128GP802
HjH
- Sun Oct 27, 2013 2:27 pm
- Forum: Flowcode V6
- Topic: Bug: Flowcode5 program in Flowcode6 open
- Replies: 7
- Views: 5722
Re: Bug: Flowcode5 program in Flowcode6 open
Jac,
enclosed the file HjH
enclosed the file HjH
- Mon Oct 21, 2013 10:07 pm
- Forum: Flowcode V6
- Topic: BUG: "FCI_DELAYINTWDT_MS(500);"
- Replies: 2
- Views: 2391
Re: BUG: "FCI_DELAYINTWDT_MS(500);"
Thank you for the help
HjH
HjH
- Mon Oct 21, 2013 9:58 pm
- Forum: Flowcode V6
- Topic: Bug: Flowcode5 program in Flowcode6 open
- Replies: 7
- Views: 5722
Re: Bug: Flowcode5 program in Flowcode6 open
Hello Benj,
I don't understand you. I have the problems reported . This problem exist in every Flowcode5 code that I in Flowcode6 open.
HjH
I don't understand you. I have the problems reported . This problem exist in every Flowcode5 code that I in Flowcode6 open.
HjH
- Sun Oct 20, 2013 11:46 pm
- Forum: Flowcode V6
- Topic: Bug: Flowcode5 program in Flowcode6 open
- Replies: 7
- Views: 5722
Bug: Flowcode5 program in Flowcode6 open
Hello, if one a Flowcode5 program in Flowcode6 opens and thereafter compile, then receives one the following errors: "Ein oder mehrere Pins von Komponente v5_switchU sind nicht mit dem Microcontrollerverbunden. Simulation und Kompilierung kann zu unerwarteten Ergebnissen führen. Vergewissern Sie sic...