Matrix user forums

:( please advice .i cannot program arduino uno r3. here are the massages and what have i done. it says, C:\Program Files (x86)\Flowcode 6\compilers\avr\batchfiles\avrc_arduinoA.bat m328 arduino com2 115200 "Flowcode1.hex" avrdude.exe: AVR device initialized and ready to accept instructions Reading |...

Hi Friends, My recent project is drawcord cutter and please find attached Flowcode. im using SANYO driver and related motor can find below link http://www.ebay.com/itm/Sanyo-PMM-BD-5701-Noritsu-2301-2901-CNC-5-phase-driver-stepper-motor-pentasyn-/261444267360?pt=Attrezzature_e_strumentazione&hash=it...

hi martin.

no problem tow versions are runing well...

regards.
nuwan

hi Martin,

i will let you know after installation.

regards.
nuwan.

Daer all,
im flowcode 4 user and have proffesional license.
im installed it on my laptop and i want to give try for flowcode v5.
can i install that on same computer.
( im windows 8 user)
thanks.
best regards.
nuwan.

im flowcode 4 user.can you please convert to flowcode v4 type.
thaks
regards,
nuwan.

Dear Uli,

cannot open the file.
coz im FC4 User. can you convert it to FC4 compatibility mode.

regards,
nuwan.

Dear Uli,
please check this out.
is it going to work this time.and the concept im going to do this is correct?????????

thaks,
best regards.
nuwan

dear,
this is my flowcode .
please check.
please note that I dont have ossillescope.

is my idea going to work?????????
Rb_0 signal frequency is vary from 1Hz to 100Hz and im trying to limit it 90 because of other concern.
i dont need very accuratly runing motor also.

best regards,
nuwan.

Dear UlI

yes im using motor with gearbox
its 12V 370 rpm max.
torque is very little i want. you have any idea please pass to me.i really stuck on this.

dear all, this time i need to feed fabric to sewing machine and it should be doing by 12 v dcmotor coupled wheel set.i can get one signal from by needle positioner and it is 5volts output for every stich . according to that signal's frquency, dc motor must modulate it's speed. to synchronization of ...

dear martin,

thanks.
problem is over.........................

Dear all, im trying to control DC motor with PWM control via ADC. the problem is Motor trouqe is very low. but with extranal power supply it is ok. im using 12 v for motor drive part with IRF 844 and PC 817 in between PIC and FET. i think the problem is Frequency, how can i adjust that in flowcode??...

Dear Martin, 1)i do not have ossilescope. 2)also i dont have specification data sheet, ITS MODEL No. is SR-402P. i googled but cannot find data sheet. anyway, could you please advise if i want to adjust duty cycle of my program ,how can i do? then i can do some trials. Thank you for your help regard...

Dear Friends, I used SR-402p type rc motor and its nameplate says it is 180 degree motor. my problem is i cannot get that range with my flowcode. it only works 90 degree for me. i used flowcode v4 example file and same thing happaning. what is the problem???? im new to this .please help!!!!!!!!!!!! :(

dear all, i found below error in my c file after compilled program. and i want solution ,im not a "c"player the problem is keypad only workes one time in real hardwear and stuck the program"please wait for assistencs"display. please help. the flowcode and c file is in attachments. #pragma error "RS2...

dear emmanuel, im going to collect some datas from sevaral production line, so im going to devalop data collecting device and it has keypad and lcd and output must be rs 232 and it is going to connect pc directly. i also wrote another flowcode and could you please check that also and when its runing...

please help someone who have e-blocks.

dear all, im getting trouble with my new program and it is , the first loop's keypad number is ok to display in lcd and transmitt via rs232 is ok and we can see it from simiulating mode. but second and third loops it simiulate with flowcode and not working in real hardwear. is something wrong with f...

have you got any flowcode for this

dear emmanual,

can you give me little explanation of that flowcode.

thanks.
nuwan chinthaka

dear all, im going to build pulse counter ,the pulse taken to pic from machine pully. machine pully speed is 5500rpm. that means nearly 90 pulses for the second.! can we do that with pic16f877f runing 20 mhz crystal cct. also i want to intergrate keypad and l c d too. any experianse before starting ...

hi friends, martin.
is there any method to give interrupt signal to pic .[hardware side].
my signal is getting from synchroniser and it variates 0v and 5v nicely with check analogue multimeter.

thanks and best regards,
nuwan.

hi martin,
thanks for reply.
sorry for the empty flow chart.
hear is again check this out.
regards,
nuwan.

hi all. im tryig to get signal from motor control box and it is 5v and it has very low currnt.then i try to put transistor and its work well. im going to give rb0 input as a signal.what is the maximum freq: of reading when pic is 20 mhz. the problem is pic does not grab the signal always. regards, n...