Search found 77 matches

by Jörg Güldner
Mon Oct 05, 2020 4:01 pm
Forum: Flowcode V8
Topic: PIC12F617 Comparator not working
Replies: 3
Views: 1608

Re: PIC12F617 Comparator not working

Hello Benj, thanks for your answere. I`ve got it running now, but is was not "comparator_flag_bit = 1". From the old project and written in big letters = FCV_COMPARATOR_FLAG_BIT = test_bit(PIR1, CMIF); and clear_bit (PIR1, CMIF); is not running! Changing to FCV_COMPARATOR_FLAG_BIT = PIR1bits.CMIF; a...
by Jörg Güldner
Sat Oct 03, 2020 8:48 am
Forum: Flowcode V8
Topic: PIC12F617 Comparator not working
Replies: 3
Views: 1608

PIC12F617 Comparator not working

Hello Anyone, an old project is running under Flowcode V6. Now under V8 is a other compiler. There I couldn`t get the comparator working. May be, that the syntax is not correct writtten from me. Program is in the attachment. Analog in is on pin6, reference is set to intern. The dedicated flag is rea...
by Jörg Güldner
Thu May 28, 2020 3:56 pm
Forum: Flowcode V8
Topic: PIC16F1829 analog 0 don`t works
Replies: 5
Views: 2739

Re: PIC16F1829 analog 0 don`t works

Hi Martin, my project is now finished and runs. To the problem AN0 is not working: Your comment --> "The very odd thing is if I use FRC setting for conversion speed, with An0 or An1 the chip locks up!" My cpu speed is 1MHz and frc clock for the adc, where I have the problems. In the datasheet you sh...
by Jörg Güldner
Fri May 08, 2020 2:15 pm
Forum: Flowcode V8
Topic: PIC16F1829 analog 0 don`t works
Replies: 5
Views: 2739

Re: PIC16F1829 analog 0 don`t works

Hello Benj,
I don`t touch in the moment the adc component, while it`s running. Today I made an update with Flowcode and see,
that the adc component was updated. Do you found something?

Best
regards

Jörg
by Jörg Güldner
Wed May 06, 2020 9:33 am
Forum: Flowcode V8
Topic: PIC16F1829 analog 0 don`t works
Replies: 5
Views: 2739

PIC16F1829 analog 0 don`t works

Hello, I soldered a trimmer to analog 0, read out the value and send it out over rs232. The voltage on the trimmer is 0 Volts. Setting the U-reference to VDD and VCC, the trimmer voltage is changing by turning. I thought, that setting up the reference in the trimmer component is OK, but it don`t wor...
by Jörg Güldner
Mon Feb 10, 2020 6:38 pm
Forum: Feature Requests
Topic: OLED with SPI SSD1306/SH1106 --> additional fonts
Replies: 11
Views: 11436

Re: OLED with SPI SSD1306/SH1106 --> additional fonts

Hello Benj,
I found some pictures from the arduino with fonts in that size, I´m missing in FC8.
Please have a look to the size, where the pictures are selcted by a red ellipse.

Jorg
by Jörg Güldner
Tue Aug 06, 2019 5:46 am
Forum: Feature Requests
Topic: OLED with SPI SSD1306/SH1106 --> additional fonts
Replies: 11
Views: 11436

OLED with SPI SSD1306/SH1106 --> additional fonts

Hello Matrix team, I must write a menue to a OLED 124x64. The font "0" is to little to read for older people. The next size is to big for long words. What I`m missing is a font like 7x10 , if possible. So this font fill up the space between the fonts "0" and "2". Can you manage that? This will be ve...
by Jörg Güldner
Mon Jun 24, 2019 6:13 am
Forum: Flowcode V8
Topic: glcd ssd1306 I2C and PIC16F1509
Replies: 3
Views: 2500

Re: glcd ssd1306 I2C and PIC16F1509

Hello,
are there some infos from the matrix side for me?
It was recommend to display objects unbuffered with smal sram.



greetings


Jörg
by Jörg Güldner
Thu Jun 20, 2019 5:26 pm
Forum: Flowcode V8
Topic: glcd ssd1306 I2C and PIC16F1509
Replies: 3
Views: 2500

glcd ssd1306 I2C and PIC16F1509

Hello,
I try to marry a ssd1306 I2C oled-display (128x32 pixels) with a PIC16F1509, but the compiler comes with an error?
Why does this not works? The cpu have 512byte sram on board. How much does the component need?
Please have a look to the attachment...........


greetings

Jorg
by Jörg Güldner
Sat Feb 09, 2019 12:08 pm
Forum: Bug Reports
Topic: Import FC7-project into FC8 --> SPI errors
Replies: 1
Views: 1935

Import FC7-project into FC8 --> SPI errors

Hello Matrix team, a program written in version 7 is not running in version 8. The compiler aborts with the following message: ------------------------------------------------------------------------------------------------------------------------------------- Options have been disabled due to restr...
by Jörg Güldner
Mon Jan 21, 2019 9:42 am
Forum: Bug Reports
Topic: PIC24EP128MC202 --> restricted license
Replies: 1
Views: 1731

PIC24EP128MC202 --> restricted license

Hello Matrix team, is for this controller the c-compiler restricted or what happens here? I´m not able to change bits in the oscillator section. Launching the compiler... C:\Program Files (x86)\Flowcode\Common\Compilers\pic16\batchfiles\pic16_C30_comp.bat "PIC24EP128MC202" "C:\Flowcode\FLOWCO~1\FLA8...
by Jörg Güldner
Sat Jan 05, 2019 7:35 pm
Forum: Feature Requests
Topic: Request for color changing inside the dark style
Replies: 0
Views: 3383

Request for color changing inside the dark style

Hello matrix team, my aim is to speak with about the colors in the dark style. The C-box have white as background color and the text is good to read. Other boxes, like "calculation" have a dark background. The calculation text is white, but the information text behind "//" is a dark green. So on the...
by Jörg Güldner
Mon Oct 29, 2018 9:25 am
Forum: Bug reports
Topic: PIC16F689 timer2 compiling errors
Replies: 3
Views: 5453

Re: PIC16F689 timer2 compiling errors

Hi Leigh,
you are right. I expected, that the fcdx-files contains the information for the choosed cpu.
So for future I can`t believe what flowcode presents in timers and interrupts. Is it right?


Best regards

Jorg
by Jörg Güldner
Wed Oct 17, 2018 7:39 pm
Forum: Bug reports
Topic: PIC16F689 timer2 compiling errors
Replies: 3
Views: 5453

PIC16F689 timer2 compiling errors

Hello Matrix team, compiling with the PIC16F689 is not correct working. I erased block to block and found out, that timer2 was the problem. An empty program only with timer2 and the PIC16F690 compiles without errors. The same with PIC16F689 brings the errors back. Can you have a look to this situati...
by Jörg Güldner
Thu Jun 07, 2018 4:22 pm
Forum: Bug reports
Topic: PIC16F1509
Replies: 3
Views: 5021

Re: PIC16F1509

Hello QMESAR,
thanks for your quick answere. My little program runs now. For testing I set a delay of "1s". This long time let the program not starts.
This is an idea for the matrix team to limit the time in the upper.

So all OK now.


Best regards
J. Gueldner
by Jörg Güldner
Thu Jun 07, 2018 3:19 pm
Forum: Bug reports
Topic: PIC16F1509
Replies: 3
Views: 5021

PIC16F1509

In the compiler box is the creating of a hex file not shown?

Best regards
by Jörg Güldner
Mon Apr 09, 2018 1:38 pm
Forum: Bug reports
Topic: Watchdog register error (PIC24F FV KA301-304)
Replies: 2
Views: 2480

Re: Watchdog register error (PIC24F FV KA301-304)

Hi Medelec35,
you are right. While I´m programing, I over read this information and try to access to this register.
Background was to change the watchdog time for different program parts to have a short reaction.


Thanks for the advice.


Jorg
by Jörg Güldner
Sun Apr 08, 2018 8:37 am
Forum: Bug reports
Topic: Watchdog register error (PIC24F FV KA301-304)
Replies: 2
Views: 2480

Watchdog register error (PIC24F FV KA301-304)

Hello Matrix team,
I need to write to the watchdog register "FWDT"
Example: FWDTbits.FWDTEN = 1;
For this c-code line I gets a compiling error, as if the complete register is not known.
Is my c-line incorrect or what happens here?


best regards
Jorg
by Jörg Güldner
Mon Feb 12, 2018 4:12 pm
Forum: Bug reports
Topic: I2C-Master with PIC16F690 not working
Replies: 13
Views: 6246

Re: I2C-Master with PIC16F690 not working

Hi Benj,
in my case you see 100khz at the component setup and gets 6,76khz from the cpu. Can you put in a dummy devider, so that the baud setup is nearly the same as the frequency coming out from the cpu?


Jörg
by Jörg Güldner
Mon Feb 12, 2018 12:11 pm
Forum: Bug reports
Topic: I2C-Master with PIC16F690 not working
Replies: 13
Views: 6246

Re: I2C-Master with PIC16F690 not working

Hi Benj,
now is working with the founded breaking connections. Well done.

To the frequency:
The component setup (baud) = 100khz
The measured clock frequency = 6,76khz (@4mhz intern oscillator)
Device family is wriitten in the headline = PIC16F690


Jörg
by Jörg Güldner
Fri Feb 09, 2018 7:32 am
Forum: Bug reports
Topic: I2C-Master with PIC16F690 not working
Replies: 13
Views: 6246

Re: I2C-Master with PIC16F690 not working

Hi Matrix Team, another info for the bug: When the compile error appears --> switch to hardware --> switch back back to software --> compiling without error !?! This happens after new starting Flowcode. Can you have a second look to the scl frequency. There is a limit in the upper, I know. But the s...
by Jörg Güldner
Thu Feb 08, 2018 5:42 pm
Forum: Bug reports
Topic: I2C-Master with PIC16F690 not working
Replies: 13
Views: 6246

Re: I2C-Master with PIC16F690 not working

Hi Stefan, here are the new facts: The attachement shows all of what I did. New program in Flowcode7 with I2C-master. At first I compiled this program without errors. Then I close Flowcode, opens again Flowcode, load the program and it appears a compiling error you can see on the PDF????? With this ...
by Jörg Güldner
Thu Feb 08, 2018 3:29 pm
Forum: Bug reports
Topic: I2C-Master with PIC16F690 not working
Replies: 13
Views: 6246

Re: I2C-Master with PIC16F690 not working

Hi Stefan,
the maximum clock frequency I measured is about 18khz.
This value is not the one who is setup into the custom box.
Setting up 100khz gives a clock frequency under 10khz@8mhz oscillator speed?


Jörg
by Jörg Güldner
Thu Feb 08, 2018 12:12 pm
Forum: Bug reports
Topic: I2C-Master with PIC16F690 not working
Replies: 13
Views: 6246

Re: I2C-Master with PIC16F690 not working

Hello matrix team, I now found out, what happens. In my software was a I2C-component from Flowcode6 who was not running. I had to erase all belonging to the component and place a new one from Flowcode7. Now Flowcode7 compiles in software-mode. What`s not correct in software mode is the value of the ...
by Jörg Güldner
Wed Feb 07, 2018 12:21 pm
Forum: Bug reports
Topic: I2C-Master with PIC16F690 not working
Replies: 13
Views: 6246

I2C-Master with PIC16F690 not working

Hello Matrix Team, in Flowcode6 works only the software-I2C and in Flowcode7 software and hardware is not working? The datasheet says, that the master is present on this chip. Please have a look to the attached PDF. The 6 chips of the datasheet have master and slave on board. In Flowcode7 I compile ...