Matrix user forums

Hi Ben,

I had been hoping to use the auto baud function so the fact that its not currently supported is going to be a bit of an issue. I'll probably take your advice and try to do it and sample at max baud rate then go from there.

Thanks for the input, much appreciated.

Cheers, Darren.

Hi, Happy New Year to all. I am a hardware engineer, and have been using Flowcode V4 for a couple of years. I now need to tackle a new concept for me and I'm looking for some advice. Essenitally I have an RF receive module from which I need to accept data and handle within a PIC. The RF module will ...

Hi All Just getting back into flowcode after a while away so after some pointers... I have a binary bit stream that will vary in length and bit rate, it is coming from a radio receiver. I want to store this to play back through a transmitter at a later date, what is the best way to store a binary bi...

Hi Ben,
Many thanks for that I will certainly try that and see if it works, we do have working ASM code that compiles but internal values are passed via the SPI bus we just need to bring this out to an external pin, sounds simple...

Best Regards

Darren

Hi all

Not a great ASM coder, I have some existing ASM code from a PIC application note, but I need to access some of the data on the SPI bus on an external PIN, any thoughts on how to do this.

Any help would be greatly appreciated

Best Regards

Darren

Hi BenJ I think there may be a little confusion here. The LF is denoting the Low Frequency of 125 KHz, basically it the 16F639 and 16F636 have 3 axis Low Frequency receiver in them and I need to know how to implement this in flow code. I have an ASM routine for the 3 Axis receiver, but not very prof...

Hi all I am using a PIC16F639 or PIC16F636 which is an 125 KHz LF enabled micro controller. We are quite competent in flowcode, but not sure where to start with this device. We have ASM for the device, but not sure which parts to cut and paste to make a flow code module for the device. I am looking ...

Hi all Anyone wishing to help it would be most appreciated. I am using a PIC16F639 or PIC16F636 which is an 125 KHz LF enabled micro controller. We are quite competent in flowcode, but not sure where to start with this device. We have ASM for the device, but not sure which parts to cut and paste to ...

Hi David I hope you do not mind I got your details from the Flowcode forums. I am using a PIC16F639 or PIC16F636 which is an 125 KHz LF enabled micro controller. We are quite competent in flowcode, but not sure where to start with this device. We have ASM for the device, but not sure which parts to ...

Hi Jac I hope you do not mind I got your details from the Flowcode forums. I am using a PIC16F639 or PIC16F636 which is an 125 KHz LF enabled micro controller. We are quite competent in flowcode, but not sure where to start with this device. We have ASM for the device, but not sure which parts to cu...