Search found 12 matches

by jeflores
Sat May 11, 2013 7:21 pm
Forum: Flowcode V5 Issues
Topic: Error reading ADC channel 5 and 6 routine, PIC 16F684
Replies: 2
Views: 6990

Re: Error reading ADC channel 5 and 6 routine, PIC 16F684

In reviewing the code and discovered that simulate without error, as implemented did not know the function of selection, thanks for your attention.
by jeflores
Fri May 10, 2013 12:57 am
Forum: Flowcode V5 Issues
Topic: Error reading ADC channel 5 and 6 routine, PIC 16F684
Replies: 2
Views: 6990

Error reading ADC channel 5 and 6 routine, PIC 16F684

; { FC_CAL_Enable_ADC ; function begin MOVLW 0x07 ANDWF FC_CAL_Ena_0006D_arg_Conv_Speed, W MOVWF CompTempVar2234 SWAPF CompTempVar2234, W ANDLW 0xF0 MOVWF gbl_adcon1 BCF STATUS, RP0 MOVF FC_CAL_Ena_0006D_arg_Channel, W XORLW 0x00 BTFSC STATUS,Z GOTO label23 XORLW 0x03 BTFSC STATUS,Z GOTO label24 XOR...
by jeflores
Fri Jul 13, 2012 7:14 pm
Forum: Flowcode V5 Issues
Topic: LIN BUS PIC16F684, unknown identifier 'TMR0IF'
Replies: 1
Views: 2222

LIN BUS PIC16F684, unknown identifier 'TMR0IF'

DRVL_16F684v10.c(1802:24): error: unknown identifier 'TMR0IF' DRVL_16F684v10.c(1802:24): error: invalid operand 'TMR0IF' Definition of 'TMR0IF' is not defined for the PIC16F684 microcontroller, when I use the slave linbus component for a micro PIC18F45K20 works well. add the following line to correc...
by jeflores
Fri Jun 15, 2012 3:34 am
Forum: Flowcode V5
Topic: Create a table with more than 256 byte of data
Replies: 4
Views: 3073

Re: Create a table with more than 256 byte of data

Thanks, so I will.
by jeflores
Thu Jun 14, 2012 10:51 am
Forum: Flowcode V5
Topic: Create a table with more than 256 byte of data
Replies: 4
Views: 3073

Re: Create a table with more than 256 byte of data

Hello thanks for replying, I create multiple tables and as an image I had to do a lot. when I compile the project is a single table, use the instruction (TBLRD *) to read. GOTO label6 MOVLW UPPER( label27 ) MOVWF TBLPTRU MOVLW HIGH( label27 ) MOVWF TBLPTRH MOVLW LOW( label27 ) MOVWF TBLPTRL label6 M...
by jeflores
Thu Jun 14, 2012 5:47 am
Forum: Flowcode V5
Topic: Create a table with more than 256 byte of data
Replies: 4
Views: 3073

Create a table with more than 256 byte of data

Create a table with more than 256 byte of data, micro pic18F45K20, Using (TBLRD *).

If u can help me with an example would be of great help.
Thanks
by jeflores
Fri Jun 08, 2012 8:20 am
Forum: Flowcode V5 Issues
Topic: ushort with error function type definition
Replies: 3
Views: 2991

Re: ushort with error function type definition

the variable type (ushort) was defined by Flowcode, to create a new macro of type integer. when you try copilar gave error, undefined variable. agrege the definition of new type and compile correct. I just want you in Flowcode check where is the error for not being manually adding the definition of ...
by jeflores
Wed Jun 06, 2012 8:13 am
Forum: Flowcode V5 Issues
Topic: ushort with error function type definition
Replies: 3
Views: 2991

ushort with error function type definition

when you create a function in Flowcode v5, void Address_set (ushort x1, y1 ushort, ushort x2, y2 ushort) The unsigned integer variable is not set, I had to add the following code (ushort typedef unsigned int;), to compile correctly
by jeflores
Fri Apr 13, 2012 6:47 am
Forum: Flowcode V5
Topic: typedef union and struct
Replies: 1
Views: 2010

typedef union and struct

hello how I can define the following structure in C code to Flowcode. The following example gives me compile error, missing bracket. Flowcode1.c(1364): error: missing right brace typedef union ELINMINT_MESSAGE_SIZE { unsigned char SIZE; struct { unsigned SIZE0:1; unsigned SIZE1:1; unsigned SIZE2:1; ...
by jeflores
Fri Apr 13, 2012 6:25 am
Forum: Flowcode V5 Issues
Topic: Error when compiling LIN-BUS with 2 or more Messages
Replies: 4
Views: 3533

Re: Error when compiling LIN-BUS with 2 or more Messages

fails to compile if you have more of a message defined in slave linbus. with version 4 does not give me the error. File name: C:\Users\Emilio\Documents\proyectos flowcode\verion_5\Pruebas\Flowcode1.c Title: Description: Generated by: Flowcode v5.1.0.0 Date: Thursday, April 12, 2012 23:24:48 Licence:...
by jeflores
Tue Apr 10, 2012 8:23 pm
Forum: Flowcode V5 Issues
Topic: Error when compiling LIN-BUS with 2 or more Messages
Replies: 4
Views: 3533

Error when compiling LIN-BUS with 2 or more Messages

hello when using the LIN-bus module with 2 or more Messages I receive the following error when compiling. NOTE: The same program works well, Flowcode 4 xxxx.c(1402:28): error: unknown identifier 'LIN_S_17_LINS_MSG1_ID' xxxx.c(1402:28): error: invalid operand 'LIN_S_17_LINS_MSG1_ID' xxxx.c(1402:26): ...