Search found 31 matches

by zadah
Wed Dec 06, 2017 10:15 am
Forum: AVR & Arduino
Topic: RTC DS3231 missing white space error ( Arduino Mega 2560 rev3)
Replies: 3
Views: 5889

Re: RTC DS3231 missing white space error ( Arduino Mega 2560 rev3)

Hello

After updates RTC is working ok, thanks.

I also noticed that DS3231 component from FC6 is working ok in FC7. (at least on arduino?)
viewtopic.php?f=58&t=14566


How usually FC6 components are compatible with FC7? Does it depend on compiler?
by zadah
Wed Dec 06, 2017 7:33 am
Forum: AVR & Arduino
Topic: RTC DS3231 missing white space error ( Arduino Mega 2560 rev3)
Replies: 3
Views: 5889

RTC DS3231 missing white space error ( Arduino Mega 2560 rev3)

Hello, I get following compiler error on FC7 after trying DS3231 RTC module (Otherwise system works OK with i2c OLED display) FC7 version: 7.2.1.4 C:\Users\Arska\Dropbox\FLOWCO~1>"C:\PROGRA~2\FLOWCO~2\COMPIL~1\avr\BATCHF~1\..\bin\avr-gcc.exe" -mmcu=atmega2560 -Os -funsigned-char -o "C:\Users\Arska\D...
by zadah
Tue Jan 17, 2017 7:50 pm
Forum: Bug reports
Topic: SSD1306 I2C slow
Replies: 3
Views: 3886

Re: SSD1305 I2C slow

Hello, The component should have a property named I2C Delay or something similar. please can you check this is set to No. If this does not solve the issue for you then please can you post your program. Actually the component was SSD1306 i2c not 1305... But anyway i didin't find any i2c delay settin...
by zadah
Tue Jan 17, 2017 12:21 pm
Forum: Bug reports
Topic: SSD1306 I2C slow
Replies: 3
Views: 3886

SSD1306 I2C slow

I Tried to use SSD1306 I2C display with FC7, but the screen update is very slow, In FC6 same program works OK (with same settings)

Processor speed is ok (based on 1 hz led blinker) PIC18f46k22

Is it possible to have speed settings for I2C communication for this component?
by zadah
Tue Jan 17, 2017 12:13 pm
Forum: Bug reports
Topic: Software uart wont compile
Replies: 5
Views: 5398

Re: Software uart wont compile

Benj wrote:I have now fixed the problem. Simply copy the attached file into your "Flowcode 7/CAL/PIC" folder and the compilation should then work correctly.
PIC_CAL_IO.h
Thanks Benj, i will give it a try.
by zadah
Sun Jan 15, 2017 6:26 pm
Forum: Feature requests
Topic: Virtualwire or simalar for RF transmission
Replies: 2
Views: 4282

Virtualwire or simalar for RF transmission

It would be nice to have error tolerant communication protocol for RF transfer:


something like this:

https://www.pjrc.com/teensy/td_libs_VirtualWire.html
by zadah
Sun Jan 15, 2017 11:54 am
Forum: Bug reports
Topic: Software uart wont compile
Replies: 5
Views: 5398

Re: Software uart wont compile

FC7 software uart wont compile (12f683) it would be nice to have custom C code like in FC5. Well you can add custom C code in FC 6 and FC 7 or I am misunderstand you some how I mean c code editable components like in fc5. They disappeared with fc6 which was big loss on terms of functionality of the...
by zadah
Sat Jan 14, 2017 4:32 pm
Forum: Bug reports
Topic: Software uart wont compile
Replies: 5
Views: 5398

Software uart wont compile

FC7 software uart wont compile (12f683)

When I open same file on FC6 it compiles ok. (File was orginally made in FC7 free version)


PS. Could you make interface more like in FC5 ( it has most clear layout so far...) + it would be nice to have custom C code like in FC5.
by zadah
Mon Apr 20, 2015 6:10 pm
Forum: Feature requests
Topic: MODBUS (slave)
Replies: 19
Views: 13128

Re: MODBUS (slave)

Hello Here is the current version of my MODBUS slave FLOWCODE components. Everything starts with MODBUS_master_requesting component.... So after you receive data to UART you will call that macro. This version is working fine with industrial Touch panels. Master writing multiple INTs command is not c...
by zadah
Fri Mar 21, 2014 5:37 am
Forum: Flowcode V6
Topic: RS232 unable to receive "0" byte
Replies: 9
Views: 7117

Re: RS232 unable to receive "0" byte

I am still on FC5 because of this kind of problems :( I dont have time to troubleshoot FC6 related errors.
by zadah
Wed Feb 12, 2014 3:30 am
Forum: Flowcode V6
Topic: RS232 unable to receive "0" byte
Replies: 9
Views: 7117

Re: RS232 unable to receive "0" byte

Is there any solution for this problem? Or should i stay on FC5?
by zadah
Tue Feb 04, 2014 9:03 pm
Forum: Flowcode V6
Topic: RS232 unable to receive "0" byte
Replies: 9
Views: 7117

Re: RS232 unable to receive "0" byte

For example this is what my touchscreen sends to PIC(18f4523) as a MODBUS master:

01 03 00 01 00 07 55 c8

And this is what my PIC "sees" :

01 03 01 07 55 c8, there is zeros missing, so the MODBUS slave wont work.


Above is workin correctly with FC 5...
by zadah
Tue Feb 04, 2014 8:58 pm
Forum: Flowcode V6
Topic: RS232 unable to receive "0" byte
Replies: 9
Views: 7117

RS232 unable to receive "0" byte

Hello Again troubleshooting FC6 ( I am trying to port my FC5 program to FC 6, but there is continuosly some errors :( ) Now I am stuck with rs232 receive component. The problem is I cant receive "0" byte in FC6 This is possible in FC 5 by selecting "extended" datatype. What does the receive type 16 ...
by zadah
Tue Feb 04, 2014 8:51 pm
Forum: Flowcode V6
Topic: 18f4523 RS232 wont compile
Replies: 3
Views: 4143

Re: 18f4523 RS232 wont compile

Hello


Yes, that was the issue... Thanks
by zadah
Tue Feb 04, 2014 5:34 am
Forum: Flowcode V6
Topic: 18f4523 RS232 wont compile
Replies: 3
Views: 4143

Re: 18f4523 RS232 wont compile

OK

The problem was unconnected RTS/CTS pins in rs232 component... But I dont need those pins, could you fix this problem ?
by zadah
Tue Feb 04, 2014 5:30 am
Forum: Flowcode V6
Topic: 18f4523 RS232 wont compile
Replies: 3
Views: 4143

18f4523 RS232 wont compile

Hello I have FC 6 version 6.0.4.0 installed I get following error message while trying to compile my program to HEX ( I have only "RS232 receivestring component" in my test program) C:\Program Files (x86)\Flowcode 6\CAL\PIC\PIC_CAL_UART.c(402:5): error: unknown identifier 'tris' C:\Program Files (x8...
by zadah
Thu Dec 19, 2013 6:07 pm
Forum: Flowcode V6
Topic: Modbus
Replies: 38
Views: 29161

Re: Modbus

Hello Steve I tried to keed to MODBUS code quite simple... First the RSR232 component resceives the MASTER command starting with slave adress (1), which after comes the command 1,3,5,6 or 16. After that the program checks if the crc is ok and if it is OK program executes command + calculates reply C...
by zadah
Tue Nov 05, 2013 5:17 am
Forum: Flowcode V6
Topic: Problem scaling in dashboard panel
Replies: 12
Views: 7853

Re: Problem scaling in dashboard panel

After Downloading version 6.03 i am able to open FC5 files without errors, so things are improving :) But the Dashboard panel is quite bad, I am not able to zoom in or out in the panel. I think you should dedicate mouse wheel to do the zooming. If you want to make good 3d / 2d interface, you should ...
by zadah
Mon Oct 21, 2013 3:55 am
Forum: Flowcode V6
Topic: Bug: Flowcode5 program in Flowcode6 open
Replies: 7
Views: 5722

Re: Bug: Flowcode5 program in Flowcode6 open

Hello I will report same kind of a problem: After opening a FC5.fcf file in FC6 and trying to compile i get following errors: Errors when generating C source code: 18f45k22_v6.c : 848 : error : Syntax error 18f45k22_v6.c : 858 : error : Syntax error I have stepper motor, RS232 and ADC components fro...
by zadah
Sun Oct 20, 2013 6:26 am
Forum: Flowcode V6
Topic: no 3d in systempanel please
Replies: 18
Views: 13865

Re: no 3d in systempanel please

I have also same problem, I tried to move on FC6, but the interface is more messy than in FC5. The pure 2D like in FC5 would be excellent. Also I tried to open my previous version of program on FC6, but I think it messed up things somehow :( because the program wont work in my PIC... I dont have tim...
by zadah
Thu Sep 19, 2013 5:52 pm
Forum: Flowcode V6
Topic: Modbus
Replies: 38
Views: 29161

Re: Modbus

Hello Here is code for working MODBUS slave. This program works well with industrial touchpanel and MODBUS RTU protocol. Touchpanel is sending commands as Master and PIC answer as a slave. The Command 16(write multiple int) is not so finished yet (because i haveny needed that so far.) The MODBUS par...
by zadah
Mon Sep 16, 2013 5:16 pm
Forum: Flowcode V6
Topic: Confused on Flowcode 6
Replies: 12
Views: 9238

Re: Confused on Flowcode 6

Hello Here is Flowcode 5 version with modified LCD component. There is modified code which allows LCD to interact with i2c. Basically display type is similar like this: http://www.ebay.com/itm/New-Blue-IIC-I2C-TWI-2004-20x4-Serial-LCD-Module-Display-for-Arduino-/281141014288?pt=LH_DefaultDomain_0&ha...
by zadah
Sun Sep 15, 2013 4:29 pm
Forum: Flowcode V6
Topic: Confused on Flowcode 6
Replies: 12
Views: 9238

Re: Confused on Flowcode 6

Hi For example how do I add 20x4 LCD display, there is no way to edit v6 LCD display... You can just change the lines and columns near the bottom of the proberties panel. This only works for the basic LCD, (i.e the first in the list. The one that looks like a picture of a commerical panel is purely...
by zadah
Sat Sep 14, 2013 8:05 am
Forum: Flowcode V6
Topic: Confused on Flowcode 6
Replies: 12
Views: 9238

Confused on Flowcode 6

Hello I just bought this new version of flowcode, and i am little bit lost :( For example how do I add 20x4 LCD display, there is no way to edit v6 LCD display... How do I add my owc C code to the LCD display? I need to add i2c LCD custom code to the display. If I open my working version of v5 in v6...
by zadah
Sun Feb 10, 2013 8:07 pm
Forum: Flowcode V5
Topic: i2c for LCD
Replies: 5
Views: 5040

Re: i2c for LCD

Thanks Benj

It compiles now OK.

I would like to understand how the modified code works... I noticed that LCD RawSend macro is not calling transmit byte nor enable pulse i2c macros....

I didint understand when i2c transmission occurs inside the LCD macro.