Search found 53 matches

by lordhex
Fri Jul 07, 2017 12:45 pm
Forum: Bug reports
Topic: 18F25K80 AND 18F24K22 MODBUS SLAVE PROBLEM
Replies: 13
Views: 2646

18F25K80 AND 18F24K22 MODBUS SLAVE PROBLEM

Hello Benj i found a small bug. i made 4 swicth to input adress of slave in 16F877A and it is working. Then i tried better mikrochips. 18F25K80 and 18F24K22 Both of them can work in simulation but IF=i put the slave adress direct real life it is working. But if i tried to put the adress by switch in...
by lordhex
Mon Oct 03, 2016 5:51 pm
Forum: Flowcode V7
Topic: SPI question.
Replies: 2
Views: 1904

Re: SPI question.

LeighM wrote:Looks like a very interesting device!

Here's an example of how the data could be extracted, once you have the 32 bit data read from the device into a variable.

MAX31855.jpg

I am trying as soon as possible.
i will be back :P
by lordhex
Fri Sep 30, 2016 8:09 pm
Forum: Fixed bugs
Topic: Startup problems with Flowcode 7.1
Replies: 59
Views: 24127

Re: Startup problems with Flowcode 7.1

jgu1 wrote:Thank you lordhex!

I see now 7.1.1 is avaliable. Has this all previus fix including langauge :?:

Br

Jorgen

I didn't try it but it must be :)
by lordhex
Fri Sep 30, 2016 4:22 pm
Forum: Flowcode V7
Topic: SPI question.
Replies: 2
Views: 1904

SPI question.

Hello guys. I have a small problem try to resolve in 2 days.But i can' find. https://cdn-shop.adafruit.com/datasheets/MAX31855.pdf Here we have MAX31855 chip.And it says in Table 2. Memory Map—Bit Weights and Functions For 14-BIT THERMOCOUPLE tempeture data i have to read D18 to D30 But i can't figu...
by lordhex
Fri Sep 30, 2016 3:34 pm
Forum: Fixed bugs
Topic: Startup problems with Flowcode 7.1
Replies: 59
Views: 24127

Re: Startup problems with Flowcode 7.1

Hi Simon and all! Before I update my sekond labtop I have a question. I have overwritten all these language file in the one labtop which have the problem, and now it work again :D :idea: :D If i dowload the FC7 from MM and reinstall in my ohter labtop, Will this now contain all new langauge and all...
by lordhex
Mon Sep 26, 2016 5:25 pm
Forum: Fixed bugs
Topic: Startup problems with Flowcode 7.1
Replies: 59
Views: 24127

Re: Startup problems with Flowcode 7.1

SimonB wrote:
lordhex wrote::)
Flowtr.dll
16
16a
parametre hatalı = (parameter Wrong)
version -1
and close
Windows 7 home 64 bit.


Hi lordhex,

Here are all the other fixed languages files, including flowtr.dll :wink:

Regards,
Simon

Thank you soo much.
by lordhex
Mon Sep 26, 2016 3:33 pm
Forum: Fixed bugs
Topic: Startup problems with Flowcode 7.1
Replies: 59
Views: 24127

Re: Startup problems with Flowcode 7.1

:)
Flowtr.dll
16
16a
parametre hatalı = (parameter Wrong)
version -1
and close
Windows 7 home 64 bit.
by lordhex
Mon Aug 08, 2016 9:31 pm
Forum: Feature requests
Topic: Modbus Slave Address
Replies: 16
Views: 6378

Re: Modbus Slave Address

Ben i want to stop asking but you know i am like a litle child :)
In the future will we have an option TCP/IP for modbus slave?
by lordhex
Wed Aug 03, 2016 11:09 am
Forum: Fixed bugs
Topic: Modbus Slave
Replies: 16
Views: 8684

Re: Modbus Slave

Konstantiant wrote:Good Morning

Thank you very much for reply.
The macro ReadCoilState working Perfect. no errors and very fast.
Please. You want to fix macro SetAnalogeInput.

Thank and best regards

Do you mean SetAnalogInput not working?
by lordhex
Thu Jul 21, 2016 6:31 pm
Forum: Feature requests
Topic: Modbus Slave Address
Replies: 16
Views: 6378

Re: Modbus Slave Address

Benj wrote:Sorry I forgot to make the new macros public. They should be there now.

ModbusSlave.fcpx

As i say before...
You are my hero.
I will always love you and matrix team.
by lordhex
Thu Jul 21, 2016 1:29 pm
Forum: Feature requests
Topic: Modbus Slave Address
Replies: 16
Views: 6378

Re: Modbus Slave Address

Hello, Good suggestion there. I have now added additional macros to allow the Baud rate and Slave address to be overridden in software so they are no longer fixed in stone by the property settings. ModbusSlave.fcpx For now I left the slave address byte count fixed by the property to avoid using ano...
by lordhex
Mon Jul 18, 2016 8:31 pm
Forum: Feature requests
Topic: Modbus Slave Address
Replies: 16
Views: 6378

Modbus Slave Address

Modbus Slave address and baud rate can be edited by component macro call commands. For exemple i want to use Switch Array for editing slave address and baud rate but i can't do it now. Every time i have to edit in program modbus slave component properties. In this case you can't write a common progr...
by lordhex
Tue Jun 07, 2016 6:43 pm
Forum: Feature requests
Topic: Modbus Slave Component
Replies: 12
Views: 8168

Re: Modbus Slave Component

Hello, @Benj I looked at the Flowcode6 Modbus master component, but I do not see data direction control output. Change the Bus property from RS232 to RS485 and this adds a data direction control pin and variable read state properties. Some good news for you... I have been granted some time to finis...
by lordhex
Mon Jun 06, 2016 5:44 pm
Forum: Feature requests
Topic: Modbus Slave Component
Replies: 12
Views: 8168

Re: Modbus Slave Component

viewtopic.php?f=32&t=17572
Waiting a hero to finish it :)
Thrust me my friend it's not easy.
I try to finish so many times always mistakes happens.
Then we need a proffesional to finish it.
by lordhex
Fri May 20, 2016 4:55 pm
Forum: Freelance Embedded Engineers
Topic: Uncompleted ModbusSlave component.
Replies: 0
Views: 4562

Uncompleted ModbusSlave component.

Hello. I need a enough skilled programmer to complete ModbusSlave component. Uncompleted component created by our Matrix Staff Ben Roland. He is working hard and i do not want to disturb him again for my needs. He give me uncompleted component and i try to complete so many times but i always do mist...
by lordhex
Fri Apr 22, 2016 2:54 pm
Forum: Feature requests
Topic: Modbus Slave Component
Replies: 12
Views: 8168

Re: Modbus Slave Component

Hello STibor Have you seen this post http://www.matrixtsl.com/mmforums/viewtopic.php?f=54&t=12676&hilit=modbus Steve Hello! Thanks for the link. I'm beginning to understand the Modbus communication. I use it successfully, "Artose's" sample code. http://www.matrixtsl.com/mmforums/v...
by lordhex
Thu Apr 07, 2016 8:15 am
Forum: Flowcode V6
Topic: Clear Macro Calls
Replies: 4
Views: 1915

Re: Clear Macro Calls

Main call => To do list value =0
if todo list value =0 ?
Yes = do something. then make value 1
No= Do nothing.
Can be help to you.
by lordhex
Thu Mar 31, 2016 8:11 am
Forum: Feature requests
Topic: Modbus Slave Component
Replies: 12
Views: 8168

Re: Modbus Slave Component

STibor wrote:Hello!
I ask whether there is a project?
I got a PLC, it has RS485 Modbus.
For this I want to connect many different little slave circuits.

Ben is working for modbus slave component.When he finish i bleave that you can do youre project easy.
by lordhex
Sun Feb 28, 2016 8:48 pm
Forum: Feature requests
Topic: Modbus Slave Component
Replies: 12
Views: 8168

Re: Modbus Slave Component

Benj wrote:Hello,

It has been started, I just need to find some time to finish it and test it works. Hopefully coming soon....

You are my hero.
I love you (as a master)
by lordhex
Tue Sep 22, 2015 4:09 pm
Forum: Feature requests
Topic: Profibus and Profinet
Replies: 9
Views: 4096

Re: Profibus and Profinet

Many thanks for your kind words, However my IQ is not insurmountable or even that high. I think blunt force and stubbornness is a better description for how I like to go about things. CRC's can be tricky to tame so I feel your pain. Either way I will try and find some time to have an investigate in...
by lordhex
Mon Sep 21, 2015 10:10 am
Forum: Feature requests
Topic: Profibus and Profinet
Replies: 9
Views: 4096

Re: Profibus and Profinet

You are right ben. But do not forget something. Everybody has not have the same IQ you have :D For exemple i try to make Modbus slave component may be more than 100 times. each time i can't find a solution for CRC calculation. It is complex for me for you may be like a toy. I hope 1 day you will get...
by lordhex
Thu Aug 06, 2015 1:13 pm
Forum: Feature requests
Topic: Profibus and Profinet
Replies: 9
Views: 4096

Re: Profibus and Profinet

We have MODBUS master but we don't have a slave component.
Profibus is a good idea too.But industry most of the components work with modbus TCP/IP or RS485.
Still i am waiting modbus slave.I hope it will come.
by lordhex
Tue May 19, 2015 11:29 am
Forum: Flowcode V6
Topic: Small interrupt problem :(
Replies: 2
Views: 1348

Re: Small interrupt problem :(

Thank's Ben you save me one more time.
This hobby is getting more fun when i learn much.
by lordhex
Mon May 18, 2015 8:59 pm
Forum: Flowcode V6
Topic: Small interrupt problem :(
Replies: 2
Views: 1348

Small interrupt problem :(

Image
How can i chose Trigger on rising edge? Or Trigger on falling edge?
I can only chose both edge :(
I think i am missing something :(
by lordhex
Thu Apr 23, 2015 9:30 am
Forum: Feature requests
Topic: MODBUS (slave)
Replies: 19
Views: 6619

Re: MODBUS (slave)

Hello, Im locking this topic now. Please continue this subject with Ben or Me only via PM. Other forum members help out because they are good helpful people and not because of some obligation. Please do not spam PMs to users on this subject else i will have to warn/ban any account doing this. * edi...