Matrix user forums

Thank you very much for answering, Already I could have fitted the frequency to 10khz, But the rollover lowers 120, :( the problem is for microprocessor of 8 bits ...18f4620 I was thinking that on having chosen the pwm setdutyCycle10bits, Already it would work to 10 bits PD: Again thank you very muc...

And the second question is,Since it is possible to choose for example a frequency of 10khz? .......regards

Hi, I have two question with the use of the PWM....
The first one is, If I use PWM of 10 bit, because I do not have 1023, instead of 255?

Thank you for answering,This it is of the first generation, Now there went out the version V2.05V for 5,5 GBP, I leave photo,
I think that also it has to work...but I'm not sure. regards

Hi, That sim 800L uses, the first version or the V2.50V? Regards

Hi, The problem this one solved, Since I have seen that my program was not working,I did the one that I put in the forum, which is very basic, Since this one does not work either, I have bought 10 new 16f88 .....And I have discovered that this is the failure, them 16f88 that it was using bought prev...

Hi Friends, I need to use internal oscillator in pic 16f88, But I have never used internal oscillator in flowcode, And I have doubts of his configuration...
I have realized this program with this configuration and it me does not work...
Might you say to me in that I have been please?

Thank you very much, already it has explained it to me so well that already I do not have problems....

PD: Thank you from my heart.....

The calculator is fantastic, I like it very much thank you :D...... So thank you again, so much. But I have the same problem, in TMR1 Interruption could fit to 104 milliseconds, But I need 100 milliseconds.. in TMR2, With the calculator I can fit much easier the timer, but The interruption cannot ov...

Thank you medelec, I am going to try it as you indicate me, and I will comment on the results....

Hi friends, I use flowcode 6, and the minimal time that allows me is 104 milliseconds for 20Mhz,
Is´t possible to fit Tmr1 for 100 milliseconds exact, or for 50 milliseconds?, how I can do it? please ...... regards

no benj, Only I have simulated it in flowcode, Then this it is the problem .... thank you very much for your help

Thank you bemg for answering, I have modified the mistake, and the interruption does not work....
Do you see well everything else? .... if I fit interruption tmr1 without being custom, in the same program it works perfectly simulating in flowcode

regards

Hi friends, the option custom timer1 something is badly because it does not work, they can help me, thank you.

he comprado 10 unidades sim800l, y fabricado pcb, pero no han llegado el pedido, (aliexpres) saludos

The difference is that in standard module this one sending pulses of information constant, because of it it is not compatible with flowcode, in order that if it is compatible alone it transmits pulses of information when they are requested... PD: I will find out on sim800l and I comment on the resul...

Flowcode uses commands "AT" not estandart, A6 uses commands "AT" estandart??

Hi kalmar, I could not because the sim 908 is not compatible with flowcode .... regards

Thank you very much for your magnificent help, regards.

For my, it is impossible to make work project with flowcode, I do not understand because it is necessary to put a code of programming in c if already I have selected internal oscillator.... :?: I think that if I choose internal oscillator flowcode already has to work,The opposite serious a bug of th...

I am new in flowcode, he forgives my ignorance, This well put the code ? Regards.....

The PCB this perfect, he working well, with the same program that I have put, but designed with another software, but with flowcode is impossible, does not work, I need, to stop designing with another program and designing my projects with flowcode ..... because of it I want to do that it works ... ...

Hello friends, I have a program that does not work, I think that it is a failure of configuration Of the project, I formed internal oscillator to 4mhz for the pic 16f88,I think that I have formed something badly, I need help to solve the problem .......Someone can help me checking the project please...

When one software is bought, the updates are free for one year, I have bought v6 professional for only 2 months (Ends of April), the 50 % of discount, will imagines that it be for the users who have v6 more of one year..... Or am I wrong? For example if I buy software in germani of eca the "vrt-dvd"...

After many hours of study, I have seen how to do interruption in rb0 with flank of raise and flank of descent, yes we can in flowcode, I have used it to detect the step for z of the encoder, I leave here capture of screen for if someone needs some day... PD: I´m very grateful for your help, without ...