Search found 39 matches

by Speed64
Wed Feb 17, 2021 5:06 pm
Forum: Deutsch Support-Forum
Topic: PIC32mx150F128B hat kein USB
Replies: 3
Views: 21190

Re: PIC32mx150F128B hat kein USB

Hallo Stefan, ich will den Chip ohne USB benutzen. In der Konfiguration in FC8 und FC9 haben alle PIC32MX1xx Enstellmöglichkeiten obwohl die hardwaremäßig kein USB haben. Dadurch gibt es ja die Fehlermeldungen. Der Compiler weiß das die einser ohne sind, aber FC schickt halt falsche Daten. Gruß Spee...
by Speed64
Wed Feb 17, 2021 1:50 pm
Forum: Deutsch Support-Forum
Topic: PIC32mx150F128B hat kein USB
Replies: 3
Views: 21190

Re: PIC32mx150F128B hat kein USB

Hallo,

habe mal die anderen PIC 32 mx 1xx getestet.
Die haben alle den gleichen Fehler in FC8 und FC9
ab mx 2xx ist der Fehler nicht mehr da.
Die Chips haben USB

MfG Speed64
by Speed64
Wed Feb 17, 2021 1:24 pm
Forum: Deutsch Support-Forum
Topic: PIC32mx150F128B hat kein USB
Replies: 3
Views: 21190

PIC32mx150F128B hat kein USB

Hallo zusammen, Beim compilieren gibt es einen Fehler weil der PIC garkein USB hat zusätzlich hab ich auch noch einen Fehler mit der Soft RS232 Habe erst einmal nur alles initialisiert und einen sek. Takt programmiert. C:\Users\uwe\Documents\Daten\Flowcode Projekte\Datenlogger.c:42:9: error: unknown...
by Speed64
Tue Jan 19, 2021 3:21 pm
Forum: Deutsch Support-Forum
Topic: PIC32MZ2048EFH064 mit 252MHz funktioniert nicht
Replies: 6
Views: 7495

Re: PIC32MZ2048EFH064 mit 252MHz funktioniert nicht

moin, danke das scheint zu klappen.
Wie laufen die RS232 Schnittstellen?


mit freundlichem Gruß
Speed64
by Speed64
Tue Jan 19, 2021 1:31 pm
Forum: Deutsch Support-Forum
Topic: PIC32MZ2048EFH064 mit 252MHz funktioniert nicht
Replies: 6
Views: 7495

Re: PIC32MZ2048EFH064 mit 252MHz funktioniert nicht

moin zusammen Ich möchte den Chip mit 250MHz laufen haben. Er ist mit 252MHz spezifiziert und sollte auch so betrieben werden können. Max 200 MHz stimmt einfach nicht. Siehe Bild. Es darf dabei keine Fehlermeldung kommen. 12MHz Quarz / 3 x 125 /2 = 250MHz Der Chip läuft mit MicroBasic Pro 32 sogar m...
by Speed64
Mon Jan 18, 2021 10:44 am
Forum: Deutsch Support-Forum
Topic: PIC32MZ2048EFH064 mit 252MHz funktioniert nicht
Replies: 6
Views: 7495

PIC32MZ2048EFH064 mit 252MHz funktioniert nicht

Hallo zusammen.

in Flowcode 8 oder 9 kann ich diesen Chip nicht über 200MHz einstellen.
Ich kann in mit mikroBasic Pro for PIC 32 sogar mit 256MHz laufen lassen.Siehe Bilder
Dieser Chip ist mit 252MHz spezifiziert.

Kann man das irgendwie in Flowcode hin bekommen?


mit freundlichem Gruß
Speed64
by Speed64
Mon Apr 27, 2020 9:22 am
Forum: Flowcode V8
Topic: Pic32MZ2048EFH100 /200Mhz Uart's too slow
Replies: 6
Views: 3407

Re: Pic32MZ2048EFH100 /200Mhz Uart's too slow

hello stefan.erni , medelec35 , Benj the C code here from stefan.erni has helped. Danke U3BRG=2592; // setzt uart 3 auf 9600 // sets Uart3 to 9600 baut This C Code has to be after the init the Uart! According to the data sheet, this is a divider for the UART a bug for me does the value have to be ch...
by Speed64
Fri Apr 24, 2020 2:37 pm
Forum: Flowcode V8
Topic: Pic32MZ2048EFH100 /200Mhz Uart's too slow
Replies: 6
Views: 3407

Re: Pic32MZ2048EFH100 /200Mhz Uart's too slow

hello medelec35 I have the test via an interrupt (clock 10ms) in the software Interrupt call "measure" in "Measure" count up to 50 then set A6 = 1 and count up to 100 then set A = 0 and count to 0 so on, that works ok hello stefan.erni it works now is that a compiler error? normally this works for m...
by Speed64
Fri Apr 17, 2020 1:43 pm
Forum: Flowcode V8
Topic: Pic32MZ2048EFH100 /200Mhz Uart's too slow
Replies: 6
Views: 3407

Pic32MZ2048EFH100 /200Mhz Uart's too slow

Hello,
I have a problem.
PIC32mz2048efh100 with 24Mhz external clock.
200Mhz system clock
Uart3 = 9600 baut
sends with 2400 baut.
download/file.php?mode=view&id=31652

where is the mistake?
by Speed64
Fri Dec 14, 2018 3:41 pm
Forum: 32-Bit PIC
Topic: PIC32MZ2048EFH100 interrupt
Replies: 2
Views: 6953

Re: PIC32MZ2048EFH100 interrupt

translated to google, sorry Hello and thanks it works now. many thanks How do I program two timers to get a 1 second interrupt? How do I program 2 timers to count on one pin impulse until the next 1 sec interrupt occurs? How do I read the value from the two timers, which was counted in one sec. Can ...
by Speed64
Tue Dec 11, 2018 6:09 pm
Forum: 32-Bit PIC
Topic: PIC32MZ2048EFH100 interrupt
Replies: 2
Views: 6953

PIC32MZ2048EFH100 interrupt

Hello I need help
as soon as a timer interrupt is inserted and active, nothing works
timing at 200Mhz
Thanks in advance
Puls 1.fcfx
(9.1 KiB) Downloaded 361 times
by Speed64
Sun Aug 12, 2018 8:52 am
Forum: 32-Bit PIC
Topic: Continuous Output Pulse at Compare 1 module
Replies: 2
Views: 5180

Re: Continuous Output Pulse at Compare 1 module

Hello Benj,
Thank you very much.
It works, unfortunately I only come to 12.5Mhz.
How can you make it faster?

Sincerely
Speed64
by Speed64
Sat Aug 11, 2018 10:45 am
Forum: 32-Bit PIC
Topic: Continuous Output Pulse at Compare 1 module
Replies: 2
Views: 5180

Continuous Output Pulse at Compare 1 module

translated with Google Hello I do not know about C code. I want to generate very short pulses in the MHz range. If possible around 50MHz I want to run the following microchip example in FC7. Example from DS61111E-Page 16 I have a PIC32MZ2048EFM100 Clock runs at 200MHz. The impulses should appear on ...
by Speed64
Sun Apr 22, 2018 12:50 pm
Forum: Bug reports
Topic: PIC18F26K80 I2C read problem
Replies: 4
Views: 7288

Re: PIC18F26K80 I2C read problem

:oops: :oops: :oops: Variable entered in the wrong place sorry
by Speed64
Fri Apr 20, 2018 4:43 pm
Forum: Bug reports
Topic: PIC18F26K80 I2C read problem
Replies: 4
Views: 7288

PIC18F26K80 I2C read problem

Hi, I'm trying to communicate with the MCP3421 from Microchip with the I2C bus. I can successfully write to the ADC but can't receive the answer. Attached is the programmcode and two screenshots. 1. screenshot shows the data I'm writing to the ADC and on the second screenshot is the anwser of the AD...
by Speed64
Mon Oct 30, 2017 4:11 pm
Forum: Flowcode V7
Topic: PIC12f1572 Servo error
Replies: 16
Views: 9580

Re: PIC12f1572 Servo error

Hello Benj, the picture shows a curve with 64Hz. it just checked again. How can I switch to 50Hz? Question: Can I use any pin for the servo if the chip has 2 CCPs? Question: Does the servo also work with a chip that has a CCP and an ECCP? PIC18F4553 with 44PINs for example Q: Do I take a pin labeled...
by Speed64
Fri Oct 27, 2017 3:43 pm
Forum: Flowcode V7
Topic: PIC12f1572 Servo error
Replies: 16
Views: 9580

Re: PIC12f1572 Servo error

servo.jpg
servo.jpg (64.79 KiB) Viewed 9370 times
measured at pin 5 AN2
how to adjust the frequency?
50Hz instead of 60Hz
thanks again
by Speed64
Thu Oct 26, 2017 5:02 pm
Forum: Flowcode V7
Topic: PIC12f1572 Servo error
Replies: 16
Views: 9580

Re: PIC12f1572 Servo error

Hi,
has inserted the code and already runs the output.
I try to make a screen shot afterwards.
Thanks to all involved.
by Speed64
Wed Oct 25, 2017 9:08 pm
Forum: Flowcode V7
Topic: PIC12f1572 Servo error
Replies: 16
Views: 9580

Re: PIC12f1572 Servo error

Hi everybody,

I tested the PIC12F1612 today.
The servo is not running.
have I overlooked something?
A4 flashes 1 sec on 1 sec off

Thanks in advance
Servo1330.fcfx
(10.81 KiB) Downloaded 306 times
by Speed64
Wed Oct 18, 2017 5:55 am
Forum: Flowcode V7
Topic: PIC12f1572 Servo error
Replies: 16
Views: 9580

Re: PIC12f1572 Servo error

Thanks again.
I will use the other pic.
With your example, I will experiment a little.
Thanks for that.
by Speed64
Tue Oct 17, 2017 10:56 am
Forum: Flowcode V7
Topic: PIC12f1572 Servo error
Replies: 16
Views: 9580

Re: PIC12f1572 Servo error

Thank you, I will test it.

I can also use an external interrupt for the RS232 interface?
i / o Pin change interrupt on RX Pin.
by Speed64
Tue Oct 17, 2017 8:27 am
Forum: Flowcode V7
Topic: PIC12f1572 Servo error
Replies: 16
Views: 9580

Re: PIC12f1572 Servo error

Hi Martin,

Thank you for your quick response
Please send me your example
by Speed64
Mon Oct 16, 2017 7:39 pm
Forum: Flowcode V7
Topic: PIC12f1572 Servo error
Replies: 16
Views: 9580

PIC12f1572 Servo error

hi, i'm trying to control a small servo motor with my pic. But when i try to compile the code i get the following error messages: Device: PIC.12F.12F1572 Generated by: Flowcode v7.2.1.4 Microchip MPLAB XC8 C Compiler (Free Mode) V1.40 Build date: Nov 30 2016 Part Support Version: 1.40 Servo1330.c: m...
by Speed64
Tue Nov 22, 2016 6:20 pm
Forum: Flowcode V7
Topic: Slow Graphical LCDs
Replies: 15
Views: 15314

Re: Slow Graphical LCDs

Hi Benj, This is just the file "glcd_SSD1963_ PIC32.fcfx" Converted to PIC32MX470F512L The original makes this mistake ############################################################### Target folder: C:\Users\Uwe\AppData\Local\Temp Source name: C:\Users\Uwe\AppData\Local\Temp\glcd_SSD1963.fcfx Title: ...