Search found 22 matches
- Wed Nov 19, 2008 3:30 am
- Forum: E-blocks
- Topic: EB005- LCD and assembly
- Replies: 2
- Views: 3552
EB005- LCD and assembly
Guys, I am attempting to display a character on the LCD using assembly language. The program use the following initialization codes: 0x33 0x32 0x2c 0x06 0x0c 0x01 0x02 This appears to work and I get a flashing cursor at postion zero. The following code is use to send a "H" to the display. ;**** Data...
- Sat May 24, 2008 6:54 pm
- Forum: E-blocks
- Topic: LCD display issue
- Replies: 5
- Views: 5511
Re: LCD display issue
Thnaks guys,
But, why does the SAME program work on one set of Eblocks but not another?
But, why does the SAME program work on one set of Eblocks but not another?
- Sun May 18, 2008 3:11 am
- Forum: E-blocks
- Topic: LCD display issue
- Replies: 5
- Views: 5511
LCD display issue
Guys, I am having trouble displaying to the LCD. I have done this many times before without issue but it now does not work. I have upgraded to another version of Flowcode. The program has two blocks. START macro and PrintASCII macro. Everything is configured ok, power applied, contrast ok, connected...
- Thu Apr 10, 2008 4:04 am
- Forum: Formula Flowcode
- Topic: Formula Flowcode connection
- Replies: 12
- Views: 24995
Re: Formula Flowcode connection
Benji, I installed the new USB drivers and now the Formula Flowcode is recognized by the laptop. But I still have a problem. Now, I can write a program and simulate it fine. But, when I attempt to download it to the Formula Flowcode, all indications is that the program has been downloaded successful...
- Thu Apr 03, 2008 2:37 pm
- Forum: Formula Flowcode
- Topic: Formula Flowcode connection
- Replies: 12
- Views: 24995
Formula Flowcode connection
I am having a problem connecting the Formula Flowcode. I believe it is a USB driver issue. When I install the USB drives either dircetly, through PPP or reinstall Flowcode V3, everything indicates success. However, the device appears in the Device Manager in OTHER with a yellow question mark. I have...
- Tue Apr 01, 2008 9:38 pm
- Forum: Flowcode V2 & V3
- Topic: C-Code error using asm
- Replies: 2
- Views: 2635
Re: C-Code error using asm
Sean,
Got it. Thanks a million.
Jack
Got it. Thanks a million.
Jack
- Tue Apr 01, 2008 2:10 pm
- Forum: Flowcode V2 & V3
- Topic: C-Code error using asm
- Replies: 2
- Views: 2635
C-Code error using asm
I am attempting to use Flowcode (V3/PIC 16F877A) to demonstrate assembly language commands in a single C-Code block between BEGIN and END. The C-Code block contains the following: asm { bsf 3,5 movlw 000 mowf 0x85 bcf 3,5 movlw 0x00f mowf 005 } However, I get the following errors: C:\Temp\Flowcode1....
- Mon Sep 17, 2007 5:41 pm
- Forum: Flowcode V2 & V3
- Topic: Installing version 3.2.1
- Replies: 3
- Views: 3348
- Mon Sep 17, 2007 12:02 am
- Forum: Flowcode V2 & V3
- Topic: Installing version 3.2.1
- Replies: 3
- Views: 3348
Installing version 3.2.1
I currently have Flowcode version 3.2.0.36, full license. When I run the installer for 3.2.1, it indicates that I need to remove my current version of Flowcode V3 using the Add/Remove in Windows.
Will this remove my license? Do I click OK and continue with the install?
Thanks,
Jack
Will this remove my license? Do I click OK and continue with the install?
Thanks,
Jack
- Wed Jul 18, 2007 12:16 pm
- Forum: Formula Flowcode
- Topic: Flowcode error
- Replies: 6
- Views: 8816
- Wed Jul 18, 2007 2:44 am
- Forum: Formula Flowcode
- Topic: Flowcode error
- Replies: 6
- Views: 8816
Ben, Thanks for the information. I installed the fix from Microsoft (http://support.microsoft.com/?id=896256) but it had no effect. However the fix from Passmark(http://www.passmark.com/forum/showpost.php?p=1176&postcount=15) solved the problem. No more errors. Thanks for the help. Is there any way ...
- Sun Jul 15, 2007 7:04 pm
- Forum: Formula Flowcode
- Topic: Flowcode error
- Replies: 6
- Views: 8816
Flowcode error
Ben, I am using the Formula Flowcode with Flowcode. I have been successful accessing the LEDs on Port D and driving the buggy forward using PWM. I also had the speaker beeping. However, at times, I am getting an error when attempting to Compile to Chip. The error is: Error: Access Violation at 0x7C1...
- Thu Feb 15, 2007 4:04 pm
- Forum: Flowcode V2 & V3
- Topic: Compiling error
- Replies: 5
- Views: 5851
Attaching file
Ben,
Could you tell me how to attach a Flowcode file in a reply?
Thanks,
Jack
Could you tell me how to attach a Flowcode file in a reply?
Thanks,
Jack
- Wed Feb 14, 2007 12:53 am
- Forum: Flowcode V2 & V3
- Topic: Compiling error
- Replies: 5
- Views: 5851
Compiling error
Ian, Steve, I have a student who is writing a clock routine that contiains three loops, seconds, minutes and hours. Display is to the LCD. His simulation works but when he tries to compile and download to the PIC he gets the following error. --------- Flowcode was unable to compile the flowcharts C ...
- Thu Jan 18, 2007 4:34 pm
- Forum: Flowcode V2 & V3
- Topic: Flowcode error
- Replies: 3
- Views: 3987
- Thu Jan 18, 2007 3:21 am
- Forum: Flowcode V2 & V3
- Topic: Flowcode error
- Replies: 3
- Views: 3987
Flowcode error
The following error occurs when trying to configure the PIC 16F88 (USB multiprogrammer) in Flowcode. "Flowcode could not load one of the component in the file because it is not registered on this machine. Install the necessary components before opening this file" Currently using version 2.2 Pro. How...
- Wed Dec 20, 2006 6:30 pm
- Forum: C and ASM Programming
- Topic: Reading and writing to ports
- Replies: 6
- Views: 8204
Got IT!!
Steve, The minimum code below works . The problem was the A/D on Port A of the 877A. I noticed in several of the other post the reference to configuraing the A/D as digital I/O. Also, I used the Flowcode .asm file as a guide. By deleting code, I finally narrowered it down to the movlw D'7' ;turn off...
- Mon Dec 18, 2006 5:40 pm
- Forum: C and ASM Programming
- Topic: Reading and writing to ports
- Replies: 6
- Views: 8204
Thanks
Thanks so much for the reply. I am using MPLab 7.2 with the default radix set to HEX. A little more background may help. I have the switches set on the Multiprogrammer board to FAST and XTAL. I have written the same program in Flowcode and it works fine. I also set PPP to HS, WDT off, LVP off. I hav...
- Sun Dec 17, 2006 2:55 am
- Forum: C and ASM Programming
- Topic: Reading and writing to ports
- Replies: 6
- Views: 8204
Reading and writing to ports
I have a multiprogrammer board (PIC 16F877A) with the Switch board on PORTA and the LED board on PORT B. I want to turn on the LED assocated with the pressed switch. I have attempted several different programs without any success. The program below is the minimul that I thought should work. No luck....
- Sat Jul 08, 2006 3:27 pm
- Forum: Flowcode V2 & V3
- Topic: Connecting two Multiprogrammers via Internet Boards
- Replies: 1
- Views: 3138
Connecting two Multiprogrammers via Internet Boards
All, I am attempting to send data (1-byte) using TCP via a network from one Multiprogrammer board (Master) to another (Slave). I have read the documentation on the Internet board and Flowcode Macros. Using that information, I have written Master and Slave Flowcode programs. But, have not been able t...
- Tue Jul 04, 2006 5:00 pm
- Forum: Flowcode V2 & V3
- Topic: Flowcode Internet Board Tutorials
- Replies: 2
- Views: 3991
Thanks
Found the files.
Thanks,
Jack Griffin
Thanks,
Jack Griffin
- Tue Jul 04, 2006 2:44 am
- Forum: Flowcode V2 & V3
- Topic: Flowcode Internet Board Tutorials
- Replies: 2
- Views: 3991
Flowcode Internet Board Tutorials
Ian/Steve,
Can you direct me to any tutorials or sample Flowcode files using the Internet board. I was able to download and implement the Web Server example and would like to see "how its done".
Thanks,
Jack Griffin
Can you direct me to any tutorials or sample Flowcode files using the Internet board. I was able to download and implement the Web Server example and would like to see "how its done".
Thanks,
Jack Griffin