Search found 18 matches

by Quartz
Fri Dec 08, 2017 4:20 pm
Forum: Feature requests
Topic: Generic I2C Component
Replies: 3
Views: 1218

Re: Generic I2C Component

I have realised I didn't explain some of the picture... In the picture those command entries with an enable tick box next to them are drop down selection boxes that have the various commands like Start, Restart, Stop etc in each so that the user doesn't have to work out what they can use it's in fro...
by Quartz
Fri Dec 08, 2017 2:22 am
Forum: Feature requests
Topic: Generic I2C Component
Replies: 3
Views: 1218

Re: Generic I2C Component

Hi Benj Thanks for the link, it just shows that almost everything is there, if you know where to look.... :-) I did have a look at the I2C master component before and didn't get very far, the link could make all the difference. And having looked around for examples / help I only found stuff that was...
by Quartz
Mon Dec 04, 2017 7:28 pm
Forum: Feature requests
Topic: Generic I2C Component
Replies: 3
Views: 1218

Generic I2C Component

I understand that component creation is possible through a step by step walk through of a tutorial or video but having wanted to control various I2C chips I found it very confusing and not easy! I have yet to be able to create one to control a MCP23008 or a MCP3221. How about..... An I2C component t...
by Quartz
Tue Oct 03, 2017 9:48 pm
Forum: 16-Bit PIC
Topic: PIC24FJ128GC006 RF7 unuseable
Replies: 4
Views: 1743

Re: PIC24FJ128GC006 RF7 unuseable

Hi Benj I have used the new chip definition file in FC7. On the PIC24FJ128GC006 I used port F7 to flash a led, I programmed the chip from FC7 and the code works fine with that port pin thank you. I'm trying to get to know the chip and the board it's on so that I can reprogram it to do some of the th...
by Quartz
Tue Oct 03, 2017 8:10 pm
Forum: 16-Bit PIC
Topic: PIC24FJ128GC006 RF7 unuseable
Replies: 4
Views: 1743

Re: PIC24FJ128GC006 RF7 unuseable

Hi Thanks for that I'll give it a go later today. I understand what you say about the datasheet but I can't explain why it's not correct. I have a board populated with a PIC24FJ128GC006 and a gLCD with a Red, Green & Blue LED backlights, one of which is connected to pin 34 (VBUS) and using that ...
by Quartz
Mon Oct 02, 2017 5:16 pm
Forum: 16-Bit PIC
Topic: PIC24FJ128GC006 RF7 unuseable
Replies: 4
Views: 1743

PIC24FJ128GC006 RF7 unuseable

Hi

Benj previously posted the necessary files so we can use the PIC24FJ128GC006 with FC7.

However using them I am unable to use pin 7 of port F (VBUS & RF7) as a digital port pin .

PIC24FJ128GC006.jpg
PIC24FJ128GC006.jpg (89.35 KiB) Viewed 1743 times



Regards
by Quartz
Fri Sep 29, 2017 1:42 pm
Forum: Flowcode V7
Topic: LCD with ST7565R1 paralel cintrooler (ERC12832-1)
Replies: 5
Views: 1538

Re: LCD with ST7565R1 paralel cintrooler (ERC12832-1)

Hi Sorry I know this is an old post but there doesn't seem to be a solution posted here for this and I am having the same problems. Details of the issue I have were posted here https://www.matrixtsl.com/mmforums/viewtopic.php?f=69&t=18907#p84251 but I didn't get a reply so I thought I'd try aski...
by Quartz
Tue Sep 26, 2017 10:48 pm
Forum: 16-Bit PIC
Topic: 24FJ128GC006 Support
Replies: 4
Views: 1873

Re: 24FJ128GC006 Support

Hi Sorry it's been so long but I was taken to work on other things so until recently I didn't get to try using your files. So I have now had some time to test the PIC24FJ128GC006 files you posted and I have been able to connect to the board and load a program onto the PIC. Unfortunately the only boa...
by Quartz
Mon Sep 11, 2017 12:45 pm
Forum: 16-Bit PIC
Topic: ICD 2, ICD 3 & PcKit 3 Parameters for 16Bit chips
Replies: 4
Views: 1551

Re: ICD 2, ICD 3 & PcKit 3 Parameters for 16Bit chips

Hi

I know it should but that is not so, I used the compile to Hex and it programmed my chip!
by Quartz
Mon Sep 11, 2017 11:00 am
Forum: 16-Bit PIC
Topic: ICD 2, ICD 3 & PcKit 3 Parameters for 16Bit chips
Replies: 4
Views: 1551

Re: ICD 2, ICD 3 & PcKit 3 Parameters for 16Bit chips

Hi Thanks for the reply and pointer, I had found something like that but not with as much info in. With that I can start using that info and test it out. First try... I used the external powerd PicKit 3 compiler option settings for 16 bit pic and then went to create the hex file. At first it complai...
by Quartz
Sun Sep 10, 2017 9:23 pm
Forum: 16-Bit PIC
Topic: ICD 2, ICD 3 & PcKit 3 Parameters for 16Bit chips
Replies: 4
Views: 1551

ICD 2, ICD 3 & PcKit 3 Parameters for 16Bit chips

Hi all I need help with the Compiler Options if you'd be so kind. I am trying to set my FC7 to use various settings for chips and hardware because depending on where I am working will dictate what I have access to. So I'd like to set it up in FC7 with a variety of options and test them out before I ...
by Quartz
Sat Sep 09, 2017 11:02 am
Forum: Flowcode V7
Topic: Compiler options settings locked
Replies: 2
Views: 875

Re: Compiler options settings locked

Hi

Brilliant, just that alone sorted me out!

I was trying to build on the Curiosity board stuff and after reading your reply I changed the selected chip and I can now edit the location etc...


Found what I need to do now many thanks for your help.... Again.
by Quartz
Thu Sep 07, 2017 6:57 pm
Forum: Flowcode V7
Topic: Compiler options settings locked
Replies: 2
Views: 875

Compiler options settings locked

Hi I am trying to point the compiler options window to all 3 of my Pro versions of the XC compilers. However, I can open the compiler option window and.. I can create a new setting and save it but no matter what setting I select I can't change the compiler location or the parameters. In the compiler...
by Quartz
Wed May 24, 2017 6:20 pm
Forum: 16-Bit PIC
Topic: 24FJ128GC006 Support
Replies: 4
Views: 1873

Re: 24FJ128GC006 Support

Hi Not a lot to report yet, I have put the files where you said to place them and restarted Flowcode, on restarting Flowcode and loading the project Flowcode froze and my PC froze too, after a short time Flowcode closed itself and gave me my PC back. It did exactly the same when I ran flowcode and l...
by Quartz
Wed May 24, 2017 6:03 pm
Forum: Flowcode V7
Topic: How to use own fonts with GLCD ST7565R component
Replies: 2
Views: 1273

Re: How to use own fonts with GLCD ST7565R component

Thanks again for your help, All the information is there in the links, I just got a bit tied up looking for stuff that wasn't there or was for a previous version or was shouting at me and I just couldn't see it. I can work things out, eventually.. :-) I'll have to load up the font set I have and see...
by Quartz
Tue May 23, 2017 12:47 am
Forum: Flowcode V7
Topic: How to use own fonts with GLCD ST7565R component
Replies: 2
Views: 1273

How to use own fonts with GLCD ST7565R component

Hi Not had to do this before so searchrd around and found what looks like lots of ways to do this with previous versions of FC but I am at a loss of how to do it with a PIC24 & FC V7. I have fonts already defined that was used sucessfully in a C program with a ST7565R glcd (not by me but I have ...
by Quartz
Mon May 22, 2017 10:39 pm
Forum: 16-Bit PIC
Topic: 24FJ128GC006 Support
Replies: 4
Views: 1873

Re: 24FJ128GC006 Support

Wow! Thats support! I have put them in the directories you said to put them. I'll be able to get my teeth into this Wednesday or failing that by the week end so I'll have a look and get back to you with how I get on. There is now another thing that hopefully just information could get me sorted but ...
by Quartz
Sun May 21, 2017 7:00 pm
Forum: 16-Bit PIC
Topic: 24FJ128GC006 Support
Replies: 4
Views: 1873

24FJ128GC006 Support

Hi I have only just got my hands on Flowcode V7 Pro to use to re-write software for a product my company produces that originally was programmed in a different flavour of C by a collegue that has since left. I got Flowcode V7 as I had previously used Flowcode Pro V5 and found it a very useful tool i...