Ok I understand.
But i have now another problem...
i wrot a simple test programm (see attachmend) but when I Start my CAN software i will get no data only stuff errors.......
I testetd the same with external CAN (MCP2515) an every thing works fine.
Anyone an Idea?
Search found 47 matches
- Thu Oct 24, 2019 6:32 am
- Forum: Flowcode V8
- Topic: Problems PIN selsection internal CAN 18F26k80
- Replies: 3
- Views: 2121
- Wed Oct 23, 2019 7:41 am
- Forum: Flowcode V8
- Topic: Problems PIN selsection internal CAN 18F26k80
- Replies: 3
- Views: 2121
Problems PIN selsection internal CAN 18F26k80
Hello, I have some problems using the internal can module of PIC18F26K80. I get no CAN meesages...... But I wonder in the datasheet and the chip view the CANRX PIN is RC7 and the CAN TX Pin is RC6. In the can component the PINS B2 and B3 are selescted and it is not possible to select another pin. Is...
- Mon Sep 23, 2019 7:37 am
- Forum: Flowcode V8
- Topic: Problems selecting Simulation Pin for interrupt
- Replies: 1
- Views: 1349
Problems selecting Simulation Pin for interrupt
hello, I have the following problem. while activating the interrupt I can select any pin for the interrupt, but for the simualtionpin I can only select RA0.
Is this a bug or do I not understand something here?
Is this a bug or do I not understand something here?
- Mon Sep 16, 2019 10:05 am
- Forum: Flowcode V8
- Topic: problems understanding / using modbus component
- Replies: 1
- Views: 1429
problems understanding / using modbus component
Hi, I'm trying to get a modbus communication right now, unfortunately I have an understanding problem here. I hope someone can help with this. I use the valve from the appendix. Now I want to change the setpoint (register 0x0004,0x00005). Here I would have to send the following string: SlaveID: 1 Fu...
- Mon May 13, 2019 7:44 am
- Forum: Flowcode V8
- Topic: Problems usin SW Chanel of CAL Uart
- Replies: 6
- Views: 3032
Re: Problems usin SW Chanel of CAL Uart
But the question is, is there any way to get the right timing? And whats the reason for the difference?
- Fri May 10, 2019 11:12 am
- Forum: Flowcode V8
- Topic: Problems usin SW Chanel of CAL Uart
- Replies: 6
- Views: 3032
Re: Problems usin SW Chanel of CAL Uart
you are absolutly right, it seems to be a problem with the timing.
But why?
But why?
- Fri May 10, 2019 10:32 am
- Forum: Flowcode V8
- Topic: Problems usin SW Chanel of CAL Uart
- Replies: 6
- Views: 3032
Re: Problems usin SW Chanel of CAL Uart
ok , i have tes with a small testprogramm, it looks like something is wrong with the timitng ......
i will try to measure it.....
i will try to measure it.....
- Fri May 10, 2019 8:46 am
- Forum: Flowcode V8
- Topic: Problems usin SW Chanel of CAL Uart
- Replies: 6
- Views: 3032
Problems usin SW Chanel of CAL Uart
Hello,
I have some problem by using the Software chanel of CAL Uart on my PIC16F1827.
When I use the Hardware chanel everthing works fine, after selecting sofware chanel (same Pins) the uart want work.
Does everyone has an Idea?
I have some problem by using the Software chanel of CAL Uart on my PIC16F1827.
When I use the Hardware chanel everthing works fine, after selecting sofware chanel (same Pins) the uart want work.
Does everyone has an Idea?
- Fri Mar 29, 2019 10:56 am
- Forum: Flowcode V8
- Topic: 16LF18857
- Replies: 9
- Views: 4845
Re: 16LF18857
I think you should use a output component (LED) to visualize the Programm and configure the Port pins.
- Tue Mar 19, 2019 8:02 am
- Forum: Flowcode V8
- Topic: ILI9341 SPI wont work
- Replies: 2
- Views: 2241
Re: ILI9341 SPI wont work
OK, i found the Problem.
The supply voltage was higher then 3V ......
But the display is very very slow, I try to colorize the background by draw a rectangle with red background color but it will take along time ......
Has someone an Idea or is that normal for this type of display?
The supply voltage was higher then 3V ......
But the display is very very slow, I try to colorize the background by draw a rectangle with red background color but it will take along time ......
Has someone an Idea or is that normal for this type of display?
- Wed Mar 13, 2019 1:39 pm
- Forum: Flowcode V8
- Topic: Problem using GLCD_SH1106_SPI
- Replies: 4
- Views: 2773
Re: Problem using GLCD_SH1106_SPI
I have found the problem, one IO-PIN (the D/C Pin) from my PIC was defective.......
- Wed Feb 27, 2019 2:25 pm
- Forum: Flowcode V8
- Topic: Problem using GLCD_SH1106_SPI
- Replies: 4
- Views: 2773
Re: Problem using GLCD_SH1106_SPI
yeah no it will work work...... almost.
The code will be compiled an prograammed, but the display shows not the expexted lines......
Ithink it will be a problem with the cloch frequency ....
Maybe someone has an Idea.
The code will be compiled an prograammed, but the display shows not the expexted lines......
Ithink it will be a problem with the cloch frequency ....
Maybe someone has an Idea.
- Wed Feb 27, 2019 12:01 pm
- Forum: Flowcode V8
- Topic: ILI9341 SPI wont work
- Replies: 2
- Views: 2241
ILI9341 SPI wont work
Hello,
next display next Problem.....
I try to communicate wit a ILI9341 by use a PIC16F1827 but it wont work...
The only the backlight of the tft will light up
Maby someone can say me whats my mistake ?!?
next display next Problem.....
I try to communicate wit a ILI9341 by use a PIC16F1827 but it wont work...
The only the backlight of the tft will light up
Maby someone can say me whats my mistake ?!?
- Wed Feb 27, 2019 11:38 am
- Forum: Flowcode V8
- Topic: Problem using GLCD_SH1106_SPI
- Replies: 4
- Views: 2773
Re: Problem using GLCD_SH1106_SPI
ok, Iwill try another Pic ....
- Wed Feb 27, 2019 7:50 am
- Forum: Flowcode V8
- Topic: Problem using GLCD_SH1106_SPI
- Replies: 4
- Views: 2773
Problem using GLCD_SH1106_SPI
Hello, i have a problem using the GLCD component. after call the device macro "initalize" the compiler will show the following massage "analog_to_display2.c: 214: (1250) could not find space (128 bytes) for variable _FCV_0ef51_gLCD_SH1106_SPI1__DRAM0" I have tested wit a PIC16F1827 and a PIC16F18325...
- Fri Feb 15, 2019 10:12 am
- Forum: Flowcode V8
- Topic: Problems using DAC Componentn PIC16F18313
- Replies: 1
- Views: 1417
Problems using DAC Componentn PIC16F18313
Hello,
I have a Problem using the DAC Component with the PIC 16F18313.
I get always the Message " _FC_CAL_DAC_SetOutput_1(Flowcode1.obj) _FC_CAL_DAC_Enable_1(Flowcode1.obj) "
Maybe there is a Bug?
I have a Problem using the DAC Component with the PIC 16F18313.
I get always the Message " _FC_CAL_DAC_SetOutput_1(Flowcode1.obj) _FC_CAL_DAC_Enable_1(Flowcode1.obj) "
Maybe there is a Bug?
- Fri Feb 15, 2019 9:59 am
- Forum: Programming Tips & Tricks
- Topic: Component Creation
- Replies: 10
- Views: 15604
Re: Component Creation
Great Toturial!
But i have one Problem, I find my user component by search but i have no icon "User".
See attached picture
But i have one Problem, I find my user component by search but i have no icon "User".
See attached picture
- Fri Feb 15, 2019 9:34 am
- Forum: Flowcode V8
- Topic: STM8 range micros
- Replies: 9
- Views: 5222
Re: STM8 range micros
oh yes!!!
the STM8 controllers are realy interesting!
the STM8 controllers are realy interesting!
- Thu Feb 14, 2019 3:51 pm
- Forum: User Components
- Topic: calculation only on simulation
- Replies: 3
- Views: 5192
Re: calculation only on simulation
Many Thanks !!!!
- Thu Feb 14, 2019 1:53 pm
- Forum: User Components
- Topic: calculation only on simulation
- Replies: 3
- Views: 5192
calculation only on simulation
Hello, i try to create a component for using the internal temperature indicator. So i add a scale from -40 to 85. Inspilulation the value schoeld be multiplied with 22 but only in the simulation.... I try to realize this bay use the simultion Symbol but it wont work... The value in the application (...
- Fri Jan 11, 2019 8:14 am
- Forum: Bug Reports
- Topic: wrong DAC PIN PIC16F1827
- Replies: 1
- Views: 1959
wrong DAC PIN PIC16F1827
Hello everybody,
I tried today the DAC component to use, unfortunately in the properties of the component Channel1 PIN A0 (this can not be changed) will be displayed.
According to the data sheet, however, the DAC output is at PIN A2.
Can it be that something is wrong here?
I tried today the DAC component to use, unfortunately in the properties of the component Channel1 PIN A0 (this can not be changed) will be displayed.
According to the data sheet, however, the DAC output is at PIN A2.
Can it be that something is wrong here?
- Thu Dec 06, 2018 11:11 am
- Forum: Flowcode V8
- Topic: Problems with ADC read out PIC16F18313
- Replies: 10
- Views: 4817
Re: Problems with ADC read out PIC16F18313
Hello,
actually i have again Problems with the ADC , specialy input A4.
I change the Test prgram by adding a Uart for debug.
The Programm will work fine in simulation, but when I make a Hardware setup the ADC value will always be 255.
Has anyone an Idea ?
actually i have again Problems with the ADC , specialy input A4.
I change the Test prgram by adding a Uart for debug.
The Programm will work fine in simulation, but when I make a Hardware setup the ADC value will always be 255.
Has anyone an Idea ?
- Wed Dec 05, 2018 11:05 am
- Forum: Flowcode V8
- Topic: help using sleep mode
- Replies: 1
- Views: 1724
Re: help using sleep mode
ok i found the mistake.
You mus set syncronisation to "not synchronised"
You mus set syncronisation to "not synchronised"
- Wed Dec 05, 2018 10:51 am
- Forum: Flowcode V8
- Topic: help using sleep mode
- Replies: 1
- Views: 1724
help using sleep mode
I moment I try to use the sleep mode of the PIC16F18313, unfortunately I have the following problem: the Sleep mode works fine until I activate the Timer0. Unfortunately I do not understand why sleep mode does not work when Timer0 is enabled. Does anyone have an idea? sleep.JPG Thank you in advance.
- Fri Nov 30, 2018 10:27 am
- Forum: Flowcode V8
- Topic: Compiler Error using RS232
- Replies: 5
- Views: 3252
Re: Compiler Error using RS232
Am I really the only one who has this problem?
Or is there only this problem with the PIC16F18313?
Or is there only this problem with the PIC16F18313?