Matrix user forums

Hi everyone Having problems with correct display of Windspeed and Max wind speed Does anyone here have a suggestion for proper viewing? At start-up, the display shows: Wind: 8.7m / s 12.5 (max) I use the FG085 mini DDS as a Function generator! Therefore, I expect the same figure in Wind m / s as ma...

Hi Benj
Thank you very much.
That was the solution

Have a nice day at work;-)

Hi everyone
Does anyone here see why I can't see Satallites which is attached below?
Do you have a suggestion in the codes that the Satellite's number can be seen in the display?
File attached:

Hi Benj I can't get Windspeed to work with dsPIC BL0032 For example, user Port F/C F0 Pin 0 Do you have another suggestion? Interuupt: Interrupt Freq 50Hz.JPG Interuupt: Interrupt Aneometer.JPG See file below ! Attachment: BL0032_KeyPress-012.fcfx Hope very much you will help with a solution ;-) Co...

Hi everyone Uses: Eblocks2 dsPIC BL0032 Is there anyone here who can tell me why I can in practice Run Left and Run Right but not simulate in Flowcode? Is there something I'm doing wrong? Or a better way to write the codes? Attached the codes here! BL0032_KeyPress-005.fcfx MotorKeyPad.JPG Uses the ...

Hi everyone
Uses: Eblocks2 dsPIC BL0032
Is there anyone here who will help with a Flowcode example web-like below?
https://github.com/CytronTechnologies/C ... WM_DIR.ino
https://github.com/CytronTechnologies/C ... r/examples

Hi Benj
Uses: Eblocks2 dsPIC BL0032
Regarding: "output icons from the switch statement".
Have tried as the picture illustrates below and also completely removed them, but can only run Run Right.

Hi everyone

Is there anyone here who will help get the keyboard pressed, the Motor can't run left or right?

Hi Benj
Uses: Eblocks2 dsPIC BL0032

Can you see why, when the keyboard is pressed, the motor cannot run left or right?
With KeyPad 4 engine Start reverse and at KeyPad 6 engine run Forwards
Attached file: [img][/img]

Hi everyone Eblocks2 BL0106 Click Board in connection with GPS Click (3.3V) https://www.mikroe.com/gps-click User:dsPIC BL0032 How to set Eblocks2 BL0106 Click Board to 3.3v out for the device GPS click How should the Codes in FlowCode be written? Like a code example! Is it something you want to he...