Matrix user forums

Hi,

Is there any PIC24 support in any of Flowcode?
I am interested to work with 16-bit PIC processors and graphic displays (TFT, touchscreen)
Best regards
Vidor

Thanks a lot!!
I managed to install and it's working.
Obviously I have an old version, and I missed to upgrade it.
Thanks again for the help.
My best regards to all of you @ MATRIX
Vidor

Hi, I'm sending the last log file of Flowcode installation. I have tried everything to install FC4AVR ver.3 but without any success. It's sad to have a great software but it's not working on Win7. If I have to go back to Win XP, means that I´m loosing a lot of time, not mentioning the other software...

Hi Steve,

I've already sent a log file, you'll find on this tread (as log.txt) earlier.
Vidor

Yes, and I get the same error message.
I tried with compatibility settings too, but no success.
I have no other ideas, I asked even at Microsoft, but they are pointing me to software's developer.
Vidor

Hi,
I have done the same installation, w/o driver install and it's failing to install.
I have no clues anymore
Vidor

Hi,
Is there anybody who managed to install Flowcode V3 for AVR on Windows7-x64 ?
Regards
Vidor

Hi Ben,

Did you managed to install FC4AVR on Win7/64bit?

Best regards
Vidor

Hi, I am sorry about writing this, but I tryed every possible solution by now, without any success. I tryed even to launch the install by launching "instmsi" files and I get the error message "Wrong OS or OS version for application". By launching the "instmsi3" I get the error message "This KB893803...

Hi,

Yes, I want to install V3 of Flowcode for AVR. I ran the installation of Flowcode, and I've selected "No - do not install the drivers at this time". I've get the same error. The installation does not go to the end.
I send you the log file from the last installing attempt.

Regards
Vidor

Hi,

The installation starts, but never ends. I get the "Installation ended prematurely because of an error" error message, and installation quits.
I tryed to install without drivers, but the I get the same error message.

Regards
Vidor

Hi Steve,

I tryed your suggestion to the problem, but no success.
The patch is not working, I'm using Flowcode for AVR!
I send you the log file.
I hope that will get a solution to the problem.
Best regards Vidor

Hi, I'm trying to install FC for AVR on Windows 7 64-bit, but no luck. I've tryed to install with Administrator rights and with Windows XP SP2 compatibility mode, without any success. I get the "Installation ended prematurely because of an error" error message, nothing else. Is there any chance to g...

Hi Sean,

Thank you very much for your help.
It seems to work in the right way now.

Best regards
Vidor

Hi Sean, Now I can send i.e.: 02188 and I get back from the Mega128 02<0>188<0> which is OK. Now the problem is that when I simulate, I can send the number 02188 every time one after one, but from Mega128 I get the 02<0>188<0> only one time. If I restart the MCU I receive just one time again even I ...

Hi Sean, Are you using Hyperterminal on the PC? Yes. Are you sending characters from Hyperterminal to the Mega128 and transmitting them back, or is the Mega128 generating the characters itself? I am sending characters to Mega128 and that transmitting them back. Are you sending <CR> from the Mega128 ...

Hi Sean,

It seems to work. My problem is that I can't get right values trough RS232.
I'm sending 155 and I get at the PC-side 1551|5

Regards
Vidor

Hi,

Everything seems to work but communication.
After some searching I find out that the AVR-mt-128 board uses USART1 as communication.

(only USART0 can currently be used directly from Flowcode)

How can I change to use the USART1 instead?

Regards
Vidor

Hi Sean,

Thanks for the help.
I missed the R/W line... so I have to implement that. Thank you.
I connected the PortC1 to ground and it started, but the text it seems to flashing...
Tommorrow I will set an output command to force PORTC1 low at the start of the program.

Best regards
Vidor

Hi Sean, Thanks for the help. When I compile the file, one error is still coming up: C:\DOCUME~1\Vidor\MYDOCU~1\Flowcode\IndHeat_13-May-08_MT128.c:1748: error: 'URSEL' undeclared (first use in this function) C:\DOCUME~1\Vidor\MYDOCU~1\Flowcode\IndHeat_13-May-08_MT128.c:1748: error: (Each undeclared ...

Hi, I want to compile a new program done in Flowcode for AVR using the Atmega128. I am using the fcd file I found here on the forum. When compiling the code it generates some error: Generated by: Flowcode v3.3.5.45 Date: Tuesday, May 13, 2008 13:42:39 Licence: Professional Registered to: Vidor Demet...

Thank you Steve, now it works fine.
Best regards
Vidor

Hi all, I want to compare two strings: ID_RX[] = ID_string[]. Both are two digits long. 01 to 99. I tried with: ID_RX[0] = ID_string[0] AND ID_RX[1] = ID_string[1] in a Decision box, but is not working. I tried with: ID_RX[Index] = ID_string[Index] but the result is the same, not working. It would b...

Hi Ben,

I thought the older version of Flowcode for PIC has had that import option.

Regards
Vidor

Hi,

You can always import an AVR Flowcode into PIC-Flowcode.
I used to do that when I want to see some examples which are done for PIC.
Hope this helps.
Best regards
Vidor