Matrix user forums

Hello Ben, No, I never connected the two boards at the same time. Tomorrow I will try to re-install the USB Driver for the V7 board on my laptop to reproduce the error. I'm not sure but mloader seems to detect the correct board but when he starts the communication with the USB interface it gone wron...

Problem found ! :D What I did is : 1. plug in my V7 board 2. Goto device manager and uninstalled the Pic Micro Programmer device with remove of his drivers !!! 3. Plug out the V7 board 4. Plug in the V9 board And tadaaa, board is WORKING :D :D :D I also did the same thing on my laptop (where I had a...

Hi Martin & Ben, Yes I'm using the mloader from the same link and the latest USB driver with pdf and doc files info included in zip. I also tried to use other pic's like 16f628 and the 16f1937 that comes with the board, all ways same message :( f1937.jpg I tried also on my laptop, no success. The la...

Hi Martin, Yes I saw the post :wink: But I forgot to mention that I now use only FC6 so I didn't try to install the V9 board on FC5. I also uninstalled the two USB drivers and reinstalled them afterwards. The cards are beying recognized (one at a time) without problem but like you can see above I di...

Hi all, Well I just received my EB006-V9 and I have the same problem (when programming a chip Error "1: Flash memory not verified - may be due to code protect"). I go to mloader to check directly the board and USB driver and tested the hex file wich produce the same error : V9.jpg So I took back my ...

STibor wrote:hello,
If you do not mind, I'd like to use the licensed real name.

Thank you!

If you want to go fast just send a PM to someone from the staff

For me, problem was solved two hours later and I had just to reactivate FC to see my name

Hi Reece, I have the same problem, I will send you a PM. One Remark, I bought my upgrade here in Belgium via Elektor who is distributor I received an Email from Matrix with purchase key that I activated in my account page but unfornately I never had a chance to change the "registered to" :( I prefer...

Hi,

Thanks Jordy !

Hi,

Thanks for the news Ben. Should it be possible to have somewhere a place on the web where we can see the progress status and estimated time of availability of the future versions ?

Regards,

Bernard

Hi Staff,

Do you have some news about the release date of 6.1 ?

It's now some months ago that ICD/ICT and some feedback about progress about progress should be very nice

I will for sure upgrade to V6 and also upgrade my dev board to V9 then

Regards,

Bernard

Maybe version 6.1

Is there some place on Matrix website or forum where we can see the dev progress and ETA ?

Have a nice weekend !

Hi Martin, Ok, that's clear. Do you already connected the datascope to the new EB006-V9 board (if you have) ? I suppose that in this case the outputs should be visible as they are directly read from the "true" ports of the controller. If this works then I will certainly upgrade my V7 to V9 board :) ...

Hi,

Yes, I used Scopeview.fcpx like explained by Jonny. I attached a screenshot.

One more question, is the RGB led component using PWM output (digital) or anolog outputs ?

Bernard

Hi all,

I added data scope to this program as testing purpose to check the pwm out of an rgb led but the outputs seems not to be simulated.

Can someone confirm ? Is this not implemented or a bug ?

Regards,

Bernard

Hi Jordy,

Should be really nice

Wich algorithm are you using ?

Regards,

Bernard

Thanks for the reply. I think I will just buy a couple of ziff sockets to plug directly on baseboard

Regards

Hi,

Just a little question, is the EB072 ziff adapter still compatible with the new EB006V9 ?

Regards,

Bernard

Hello all !

So I installed FC 6.0.2 and was able to compile the new fcpx component

And it works like a charm

Only thing I had to do is change CS3 pin from PortC6 to PortC7 (maybe a pull up or so ?)


Regards,

No problem, I understand. Keep giving us a good support, that's great

Kind regards,

Sorry,

Just the same error "Failed to add component"

I just installed your latest version but it gives an error "Failed to add component" so I'm unable to test it.

Can you check ?

Regards,

Hi Jonny, I attached the test program I used above, It's just writing "Hello" (one time !) in each corner of the display and then draw a rectangle box in the middle. In the flowcode simulation the result is ok but not on the display itself like viewed on the video. On the video you see that it write...

Hi Ben,

Just tested the display on my devboard and I have a strange behaviour ..

Can you check the attached video ?

http://youtu.be/agsb3d_RvrM

Regards,

Ooops,

Sorry Ben, problem seems to come from the Led array component

Hi Ben, Sorry for my late reply but I was not at home ... I just tried to compile a test program on my devboard but unfortunately I receive two syntax errors in code /*========================================================================*\ Use :led_base1 :Macro implementations \*=================...