Matrix user forums

Hello, Maybe I just do not know, but how have to set the acces path for the offline installed WIKI Help, in an offline installed Flowcode 7. Because the Flowcode always searching it on the Internet, and I can't find, where have to set up the acces path. Can someone help me on this? Best Regards, Lag...

Hello Ben,

It's magic!
Each pixel lit in their own position and what I programmed The Component Macro does it.
Super.
I think this bug is cured by you.

Best Regards,

Lagoda

I tried a few settings.
Is this help for you?

Hello Ben, Thank you very much for your help. :D :D I am very pleased because I can handling the display. I hope this will be the last question from this component. How can I to rotate the display content? If I using the "Display Orientation" function with parameter "2" I get the next screen: Do you...

Here is the result

I attached it.

I checked, surely I changed to the new file.
And I set the following:
X=4 Y=0 "Thanks for helping"
X=4 Y=32"Volume=1000"

Now it looks like

Hello Ben, Unfortunately, the situation has not changed. I see the same as the previous photo. On the left side of the image pixels are lit scattered in 4 column. In the four column the "Clear Display" function is not working. And it would be nice if the 0,0 point is to appear in the upper left corn...

Hi,

The "Dislay Clear" function is working now.
After the reset the operation is stable.

It's just been really bad. The picture has been mirrored x-axis, compared to the previous state . The picture disintegrated and always changeing the image content after the reset. (More and more unreadable.) The "Dislay Clear" function in the Componet Macro do not working.(I did not drew. :D ) It wo...

Hi,
Quickly I tried this version.
Improved but it is still not perfect.

X = 0, Y = 0 position "Thanks for helping"
X = 0, Y = 32 position "Volume = 1000"

Hello Ben, I tried to modify the X value. If I want to write out the text on the display and the text extends over on the 132nd pixel column (128-132 not shown on the screen) then repeated cyclically prints on the screen and reset, prints on the screen and reset. If the initial position of the text ...

Hi Ben,

If you have time, can you check the display initialisation process?
I thought might bring us closer to the solution.
I would not say that, I understand everything.
For the time being.

Thanks,
Lagoda

I have not studied thoroughly the technical data of SSD1503, but I think I'll do it today.

That would be great. Thank you very much.

I tried different offsets:
Heigh offset=0, Bottom 32 lines available
Heigh offset=32, Top 32 lines available
Heigh offset=64, Bottom 32 lines available
Heigh offset=96, Top 32 lines available

OHH Sorry! The previous version, it pushed down the the display content with 32 rows. I just pushed a reset. The "Clear Display" is not functional and could not see the change. The second version was better. Now writable of the top 32 row but of the lower 32 row are not. Sorry but I have not been cl...

Hello Ben,

Thank you very much, to deal with the issue.
Unfortunately, the situation is apparently the same as before.

Lagoda

Hi Ben, Thanks for the tip I tried but the result is not good. Maybe it would be helpful to identify a few specific type, by which the Component Macro was tested and which probably will not be a problem for the user. (If it is possible.) If you had a reference assortment, to designing and to debuggi...

Hi Ben,

Now it works on my computer , but only in "Point cloud" mode.

Thank you for your help.

Best Regards,

Lagoda

Hi, I bought a display module with SSD1305 driver. During testing, the following problems have occurred: - "Clear Display" Function does not work. Random pixels are lit on the display after execution. - The display 32 row offset will appear on the screen. The (0, 0) pixel coordinates (0; 32) at coor...

Hi Ben, Thank you very much, it has examined the problem. I tried your suggestion, but unfortunately it did not work. I think that the GLCD modules in the simulation of Flowcode has used the same graphics program module, but with different parameters. But why then is able Flowcode 7.1.1 simulate ILI...

Hi Ben,

Thanks, it's working.

Best Regards,

Lagoda

Hi Ben, Thanks for your advice. I tried to Point cloud mode but it did not work. Then I tried SSD1306 display but just did not work. I tested the ILI9341 and SSD1351 displays too. They worked Bitmap mode, but just did not operate in Point cloud mode. The interesting thing is that, it worked under Fl...

Welcome to the support team,

The SSD1305 display module was tested under Flowcode version 7.0.4 and it worked.
If the Flowcode version 7.1.1 I use the same file .fcfx there is no indication.
Only simulations were used in both cases.
Am I doing something wrong?

Best Regards,

Lagoda