Matrix user forums

Hi Ben What about a Microchip board with a BLE Modul for Flowcode? Would it be possible to include all the components from the board in Flowcode? It is possible to program this small board with drag and drop via USB. On the bottom, there is a battery holder and this PIC is really energy efficient. T...

Hi Leigh Yes I tried this, but it didn't work. I'm looking for USB serial. It's not yet working... Fc8_Leddriver_EFG144_5er_Serie1.c:522:23: fatal error: CDC_Setup.h: No such file or directory \*========================================================================*/ ^ compilation terminated. Erro...

Hi Ben Ok I changed the place, It's not yet working. Launching the compiler... C:\Program Files (x86)\Flowcode\Common\Compilers\pic32\bin\xc32-gcc.exe Parameters: "32MZ2048EFG144" "C:\C#_SOU~1\_#FC\OPTIS_~1\LEDTRE~2\" "Fc8_Leddriver_EFG144_5er_Serie1" "32MZ" xc32-gcc.exe: error: Parameters:: Invalid...

Hi Ben Ther are many XC32-GCC.exe. Where is the correct place to copie the 2 folders "batch and harmony" Location: C:\Program Files (x86)\Flowcode\Common\Compilers\pic32\bin\xc32-gcc.exe Parameters: "$(chip)" "$(srcdir)" "$(target)" "$(family)" I get this error. Launching the compiler... C:\Program ...

Hi Ben

If I look at my computer the file is there.
But why this error?:

fatal error: CDC_Setup.h: No such file or directory

Hi Pascal, Hi Ben

If I compile your program I get also this error.

C:\Users\KFS-FO~1\DOWNLO~1\USB_Fehler.c:443:23: fatal error: CDC_Setup.h: No such file or directory

regards

Stefan

Hi Bruno

Check your path from the filename. Sometimes letter like "äöüé" from swiss-german give this problems.
or
There is a trial software for 90 day's you can use for convert, test, remesh, from all format to all format....

https://www.rhino3d.com/de/download


regards

Stefan

Hi Ben

The simulation is working fine.

In the hardware its' showing for all the AN signals the value from AD0. If I change the paramter from AN01 Vref to 5Volt
it' shows the the value still from AN0, but in the range of 5 volt.

Hi Ben

It's still the same. No change.

Hi Ben I changed the CPU from PIC32MZ2048ECG100 to PIC32MZ2048EFG100 And I tried the same with PIC32MZ2048EFH100 and there the PIN C4 is working on SPI2 as MISO. So I tried it again with the PIC32MZ2048EFG100 and it's working now there also. I don't know exactly why. But that's fine regards Stefan

Hi Ben I found a problem. If I use the slider_plastic component and choose AN0 (port B0) the AD is working fine with the signal on B0. When I change the slider_plastic component to: AN1 (port B1) the AD is showing me the signal on B0. AN22 (port C1) the AD is showing me the signal on B0. I'ts shows ...

Hello Brendan Yes that's very nice. Thank's a lot. So you can quickly and easily change clock properties. There is a way to do this during the program. Somehow with the unlook sequences and keyword (syskey). I only suspect that. But putting the PIC in a power-saving mode would be a good thing. As an...

Hi Kersin Here is an idea for a hardware The picture is with a network click board. Just change the clickboard to the Lora clickboard (Microchip RN2483) In the forum post, You can download a sample program for the PIC 32 . There you can change the network-modul to the lora. Link to the demosoftware:...

Hi TSMroz I'm using the W5500 on a hardware. It's a clickboard where you can choose 2 clickboard I choosed: place1 the W5500 and place2 a oled display Both are working with the FC program in the attachment, I can conncet to the PC and send and get some data. But there is a lot of this wrong in my co...

Hi Ben

Is there a way to have the DSP component (Filter) in 32 Bit instead of 16 Bit?


regards


Stefan

Hi Ben

It's motion capture from teeth and bones.

regards

Stefan

Hi Ben 5 network cards sounds interesting To record a 3D movement track you need 3 fast cameras. One for each axis( X, Y, Z). These cameras mostly have a GIGE interface, which is about 1Giga-lan. Each camera needs a network connection to transfer the data for 80,000 lines with 2000 pixels per second...

Hi Ben

Yes it is working. Scada has also recognized my 5 network cards and I can simply select card 4 and it connects the network card where the Microchip Board is plugged in. PERFECT !
Ok I have to program the correct socket connection now ….

regards

Stefan

Hi Ben

Is it possible to use NetworkComms component with the PC networkcard in SCADA?

regards

Stefan

Hi Ben OK. I have to think about what I want to do with the modul. Maybe I have to take a new module or wait.... It would be nice to know which WiFi and LAN modules are planned for Flowcode 9. Microchip has a new Board. On this board, there is an Ethernet PHY connector. Will Flowcode support this ph...

Hi Ben


Thank you for the Infos. I can compile it now.
In the forum I found somthing about the ENC28J60. Is this still a problem?

http://www.matrixtsl.com/mmforums/viewt ... J60#p97073

Hi Ben The programpart with the "Webserver" is working nice. I can commnunicate with a socket connection from a PC too. But not as a socket open/close connection, just as send back a string. From the forum I found a samplecode for socket. Is this the correct way to use NetworkComms? What mean's stat...

Hi Ben I use 12 filters at the same time and this works great. So far I've only used the filters for the display. Actually the filters work so well that I want to use them for storing the 24 bit data. So I would like to use a 32 bit filter (DSP component) version. What do you think? At the moment it...

Hi Panuj I guess you have to use C code. You can find information here. How much data do you have to save? Flowcode offers easy use of an EEprom or an SD (micro-SD) card. There is also an RTCC component that has a little space. It's a RAM but with the backup battery you can use it like EEprom. regar...

Hi Derrihj

Do you have a hardware? A Pic-board?