Search found 199 matches

by Zane
Sun May 20, 2018 9:42 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi Ben,

I have downloaded the latest updates. I can get both PWM channels to work. However it looks like when using T4 or T6 to drive a given channel it looks like T4 and T6 are getting their values from T2. When using T2 all the timing values seem correct.

Thanks

Zane
by Zane
Wed May 16, 2018 8:27 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi Ben

I have ordered some PIC16F18326's. When they arrive i will try with those too and let you know how we get on. I am sure they will work a treat. Once again thanks for your help. :D

Cheers

Zane
by Zane
Tue May 15, 2018 8:33 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi Ben, Thanks, i have tried with these file updates and it works a treat. :D How the .FCDX file required updating to allow the PWM output to work on the PIC16F18323, is the same mod required for the PIC16F18326's .FCDX file as well? If so are you able to post the mod for that file as well. Thanks Z...
by Zane
Mon May 14, 2018 9:19 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi Ben,

Have you had a chance to look into the problem with the PIC16F18323 with the PWM not working when using timer 2 to drive the channel?

Cheers

Zane
by Zane
Wed May 09, 2018 8:34 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Thanks Kenrix for spotting my rookie mistake, what i thought i ordered and what i got...two different things :oops: time for my next set of glasses. :lol: I have changed the device to a PIC16f18323. When trying to drive the PWM channel from timer 2 it will not work. I have used the same small progra...
by Zane
Wed May 09, 2018 10:27 am
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi

I see your point there is a chance I could have been supplied with the wrong chip. I will double check that tomorrow. I still have the issue however with timer 2 and not working with the PWM channel. Thanks for your help.

Cheers
by Zane
Tue May 08, 2018 9:25 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi Ben, Looking at the flowchart posted in the post above, i have set the timer properties in the interrupt icon for the tests that i have done. When changing between timers were you going into the timer properties to configure the clock source etc. With timers 2, 4 and 6 there are no options to sel...
by Zane
Sat May 05, 2018 2:40 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi Ben, Thanks for the advice with the MPLAB IPE software. I have set it up as you have advised and can now program using this software tool. :D When programming a chip i get the message below saying an invalid device is connected, however it seems to go through and program the target device without...
by Zane
Fri May 04, 2018 4:10 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi Ben, Thanks for your efforts here. A job well done. I have tried these in software and it all seems to work fine :D . I went through and tried to test it on hardware but was unsuccessful. Using a program that i know works with a given device (PIC12F1840) the PICKIT 3 and Flowcode can connect. If ...
by Zane
Thu May 03, 2018 3:54 pm
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

Re: PIC16F18326 PMW Timer 2 only available timer

Hi Ben,

I was wondering if you have been able to have a look at this problem yet. With only having access to one timer i cannot get separate PWM channels to act with different different parameters.

Thanks in advance.

Zane
by Zane
Wed May 02, 2018 4:09 am
Forum: Bug reports
Topic: PIC16F18326 PMW Timer 2 only available timer
Replies: 25
Views: 21731

PIC16F18326 PMW Timer 2 only available timer

Hi,

Using a PIC16F18326, when selecting a timer to associate with a given PWM channel, timer 2 is the only available timer.
Capture.JPG
Capture.JPG (13.3 KiB) Viewed 17739 times
Thanks

Zane
by Zane
Wed Jan 10, 2018 3:25 pm
Forum: 8-Bit PIC
Topic: PIC18F26K80 errors on compiling when using timer 4
Replies: 2
Views: 3012

Re: PIC18F26K80 errors on compiling when using timer 4

Hi Benj,

Thanks for the fix for this. I have tried this using hardware and it works a treat. :D

Thanks

Zane
by Zane
Sun Jan 07, 2018 8:23 pm
Forum: 8-Bit PIC
Topic: PIC18F26K80 default watchdog postscaler shown incorrectly
Replies: 1
Views: 2362

PIC18F26K80 default watchdog postscaler shown incorrectly

In the configuration screen for the above chip, the default postscaler is not shown correctly, see below.
1.jpg
1.jpg (43.81 KiB) Viewed 2362 times
by Zane
Sun Jan 07, 2018 8:15 pm
Forum: 8-Bit PIC
Topic: PIC18F26K80 errors on compiling when using timer 4
Replies: 2
Views: 3012

PIC18F26K80 errors on compiling when using timer 4

When incorporating timer 4 into a program compiling fails with the errors listed below. 2.jpg Unrelated to the above problem, when compiling the following message is given. This however does not seem to cause any problems with the operation of the program. I'm not sure if its anything that needs loo...
by Zane
Thu Jan 04, 2018 9:53 am
Forum: Bug reports
Topic: Analog input icons missing
Replies: 1
Views: 1962

Analog input icons missing

A small cosmetic problem that i spotted on the latest version, the icons for the analog inputs are missing.
1.jpg
1.jpg (20.96 KiB) Viewed 1962 times
by Zane
Wed Nov 01, 2017 9:58 pm
Forum: Bug reports
Topic: PIC12F1840 alternate Rx pin not working
Replies: 4
Views: 3533

Re: PIC12F1840 alternate Rx pin not working

Hi Benj,

You have worked your magic again. I have tried using both the cal UART and also the RS232 components to send and receive data to the PIC. I have tried using both the default and the alternate pin selections and they all work as required.

Thanks for your help :D .

Zane
by Zane
Wed Nov 01, 2017 3:27 am
Forum: Bug reports
Topic: PIC12F1840 alternate Rx pin not working
Replies: 4
Views: 3533

Re: PIC12F1840 alternate Rx pin not working

Hi Benj

Thanks for creating the fixes for me. I will be able to try them out tomorrow so i will let you know how i get on then.

Thanks

Zane
by Zane
Mon Oct 30, 2017 4:55 pm
Forum: Bug reports
Topic: PIC12F1840 alternate Rx pin not working
Replies: 4
Views: 3533

PIC12F1840 alternate Rx pin not working

Hi, I have been using a PIC12F1840. I have the cal UART component in use and have found that when using default Rx pin on RA1 the RX interrupt works as expected allowing a comms interrupt routine to be called however when the alternate Rx pin on RA5 is used the Rx interrupt does not seem to work. Th...
by Zane
Sun Oct 29, 2017 1:30 pm
Forum: Bug reports
Topic: Interrupt routine not being called
Replies: 6
Views: 4456

Re: Interrupt routine not being called

Hi Martin,

Thanks for that :oops: pointing out the obvious that i should have spotted

Cheers
by Zane
Sun Oct 29, 2017 1:16 pm
Forum: Bug reports
Topic: Interrupt routine not being called
Replies: 6
Views: 4456

Re: Interrupt routine not being called

Hi Martin, Thanks for your reply. Looks like i have been dealing with two separate issues here which has put me off a bit. One is the above issue and the other is the chip i am using. It is a PIC12f1840. It is not possible to drive the output A3. When it is written to nothing happens. I have tried a...
by Zane
Sun Oct 29, 2017 11:54 am
Forum: Bug reports
Topic: Interrupt routine not being called
Replies: 6
Views: 4456

Interrupt routine not being called

Hi, The project i have been working on has failed to work with some real basic functionality i have used numerous other times. I have gone back to basics and created a simple flowchart. Even with this i cannot get the expected results in simulation or on hardware. The flowchart is set up with an int...
by Zane
Wed Oct 11, 2017 5:59 pm
Forum: Feature requests
Topic: PIC12F1840 remappable pin function
Replies: 4
Views: 6582

Re: PIC12F1840 remappable pin function

Hi Ben,

I have tried the two separate components. The CAL_UART component works fine. The RS232 component when selecting the alternate pins, the TX and RX pin connections do not update.

Thanks

Zane
by Zane
Wed Oct 11, 2017 10:20 am
Forum: Feature requests
Topic: PIC12F1840 remappable pin function
Replies: 4
Views: 6582

Re: PIC12F1840 remappable pin function

Hi Ben,

Thanks once again for your good work. I will give this a try tomorrow and let you know how it goes.

Thanks

Zane
by Zane
Wed Oct 11, 2017 5:39 am
Forum: Feature requests
Topic: PIC12F1840 remappable pin function
Replies: 4
Views: 6582

PIC12F1840 remappable pin function

Hi I have started a project using a PIC12F1840. The PIC has remappable pins for different functions on the chip. Is it possible when using the UART component to be able to incorporate this remap pin function for this chip as is done with other chips supported by FC7? If so that would be most appreci...
by Zane
Mon Jun 19, 2017 7:45 pm
Forum: Bug reports
Topic: CAL UART connections not updating when a file is opened
Replies: 3
Views: 4105

Re: CAL UART connections not updating when a file is opened

Hi Ben,

I have attached a copy of a project as well as a copy of the component file of the component that is used in the project. I have tried doing the same with a matrix created component and when the file is reopened the correct connections are displayed.

Thanks for having a look at this.

Zane