Matrix user forums

Dear,

In attachment there are two files for two miac modules
I have made a standard can connection with two Miac modules.
The flowchart simulation work perfect, but the software will not load in the modules.
By compile to C there are errors.
What is here wrong?

Best regards

Nazaire

Hi Martin

In flowcode 5 it works correct.

What is it wrong in flowcode 6?

Best regards

Nazaire

Dear,

I have display the value of the ADC on the miac module.
In the flowchart simulation is the maximum value 255.
I have loaded the software in the miac module and there is the maximum value of ADC = 127
See attachment Oefening5.fcfx
What is it wrong?

Best regards

Nazaire Verrue

Thanks Leigh

Now it work correct

Best regards

Nazaire

Hi Martin

When i load the software in the Miac module then is An1 connected with I2 and not with I1
In the flowchart is An1 connected with I1.
See attachment Oefening4. fcfx
Wat is it wrong?

Best regards

Nazaire

Hi Martin I have replace MIAC.fcdx. The channel of the properties from knob_ptr_black1 is not correct. In the properties of knob_ptr_black1 is channel An1 connected with I1. See IC In the Miac module is channel An1 connected with I2. Jou must modified file with An0 to An7 to I1 to I8 respectively an...

Dear,

The channel of the properties from knob_ptr_black1 is not correct.
In the properties of knob_ptr_black1 is channel AN1 connected with I7. See IC
In the Miac module is channel AN1 connected with I2.
See attachment Oefening4.fcfx
What is it wrong?
Best regards

Nazaire Verrue

Hi Martin

I am running now the latest version of V6 (6.0.2.0 (27.09.2013)).
Now it work correct.

Thanks Martin for the help.

Best regards

Nazaire

Hi Martin

In the properties can i not sw_toggle_mtl_pcb1 connected with port A = 0 (RA0) there is alone port A = 1 or 2 or 3 or 4.
Wat is it wrong in tis properties of sw_toggle_mtl_pcb1?

Best regards

Nazaire

Hi Martin

The sw_toggle_mtl_pcb1 is connected with I1. I1 does not work but I2 work well.
What is it wrong?

Best regards

Nazaire

Dear,

The file in attachment work in the simulation and the file does not work in the Miac module.
What is it wrong?

Best regards

Nazaire Verrue

Dear,

I can not connect in flowcode V5 the servo motor with the miac GPS expansion module. I can well connect the servo motor with a miac basic expansion module. Why can i not connect de servo motor with the miac GPS expansion module?

Best regards

Nazaire VERRUE

Thank you Leigh

The CAN2 communication Miac module work now correct.

Regards

Nazaire Verrue

Dear,

The CAN2 communication Miac module in attachment file will not work.
There are no codes on the canbus.
What is it wrong?

Best regards

Nazaire Verrue

Dear Leigh and David

Thank you,
The PWM output with DC motor work now correct.

Best regards

Nazaire

Dear, I have made a miac master-slave network with a digitale input (channel 1 with button) and an analoge input ( channel 2 with potentiometer) of the master module. A digitale output (transitoroutput 1 with a lamp) and a PWM output (transitoroutput 3 with a DC motor) of the slave module. The digit...

Thank you Sean

The CAN2 component in flowcode V4 work now perfect.

Regard

Nazaire

Hello

I have now install Flowcode V4
CAN2 work now. The data work correct but not the identifier. The identifier
does not change. The identifier is not correct. It stay always up 688.
In attachement i have sent you the program.
What is it wrong?

Best regards

Nazaire